There are practical, if cruder alternatives to separate the long fiber for high-quality textile production, but in fact such techniques are used mostly for non-textile applications. This involves production of “whole fibers” (i.e. harvesting both the long fibers from the cortex and the shorter fibers from throughout the stem), and technologies that utilize shortened hemp fibers. This approach is currently dominant in western Europe and Canada, and commences with field dew retting (typically 2–3 weeks). A principal limitation is climatic—the local environment should be suitably but not excessively moist at the close of the harvest season. Once stalks are retted, dried, and baled, they are processed to extract the fiber. In traditional hemp processing, the long fiber was separated from the internal woody hurds in two steps, breaking (stalks were crushed under rollers that broke the woody core into short pieces, some of which were separated) and scutching (the remaining hurds, short fibers (“tow”) and long fibers (“line fiber, ” “long-line fiber”) were separated). A single, relatively expensive machine called a decorticator can do these two steps as one. In general in the EU and Canada, fibers are not separated into tow and line fibers, but are left as “whole fiber.” In western Europe, the fiber is often “cottonized,” i.e. chopped into short segments the size of cotton and flax fiber, so that the fibers can be processed on flax processing machinery, which is very much better developed than such machinery is for hemp. In North America the use of hemp for production of even crude textiles is marginal. Accordingly, the chief current fiber usages of North American, indeed of European hemp, are non-textile.

You cannot have a fatal overdose from cannabis use. However, if you have too much in one session it can lead to a very unpleasant experience. Anxiety and panic attacks, disorientation, and inability to focus are all signs you have had too much. Other negative effects from taking too much include loss of coordination, shortness of breath, increased heart rate and shaking, chills and sweats. 


Cannabis is by far the most widely cultivated, trafficked and abused illicit drug. Half of all drug seizures worldwide are cannabis seizures. The geographical spread of those seizures is also global, covering practically every country of the world. About 147 million people, 2.5% of the world population, consume cannabis (annual prevalence) compared with 0.2% consuming cocaine and 0.2% consuming opiates. In the present decade, cannabis abuse has grown more rapidly than cocaine and opiate abuse. The most rapid growth in cannabis abuse since the 1960s has been in developed countries in North America, Western Europe and Australia. Cannabis has become more closely linked to youth culture and the age of initiation is usually lower than for other drugs. An analysis of cannabis markets shows that low prices coincide with high levels of abuse, and vice versa. Cannabis appears to be price-inelastic in the short term, but fairly elastic over the longer term. Though the number of cannabis consumers is greater than opiate and cocaine consumers, the lower prices of cannabis mean that, in economic terms, the cannabis market is much smaller than the opiate or cocaine market.
Nevertheless, every bit of this ancient plant is useful and valuable, and not just for rope, but for textiles, auto parts, cosmetics, dynamite, supplements, food, and medicine. In ancient China, hemp seed was regarded as food for the lower classes, and in Europe, a peanut butter-like spread was made from the seeds, in both cases with the hulls intact.
Cannabis is indigenous to Central Asia and Indian subcontinent,[183] and its use for fabric and rope dates back to the Neolithic age in China and Japan.[184][185] It is unclear when cannabis first became known for its psychoactive properties; some scholars suggest that the ancient Indian drug soma, mentioned in the Vedas, was cannabis, although this theory is disputed.[186]
Hemp, the non-psychoactive variety of the cannabis sativa plant, is already being integrated into several mature markets such as food, textiles, construction, personal care and nutraceuticals. This relatively quiet cannabis relative is emerging as a potential commodity ripe to not only impact, but possibly revolutionize, tech-driven markets and economies around the world.
It’s a truism to state that pain is an inevitable part of life. And it’s true that we all, from time to time, experience pain that is short-lived and treatable. But those who deal with chronic pain know the debilitating, life-sucking reality of this condition. And traditional medications often come with long lists of side effects which can be as debilitating as the pain itself.
The scientific debate regarding taxonomy has had little effect on the terminology in widespread use among cultivators and users of drug-type Cannabis. Cannabis aficionados recognize three distinct types based on such factors as morphology, native range, aroma, and subjective psychoactive characteristics. Sativa is the most widespread variety, which is usually tall, laxly branched, and found in warm lowland regions. Indica designates shorter, bushier plants adapted to cooler climates and highland environments. Ruderalis is the informal name for the short plants that grow wild in Europe and Central Asia.
Public heath insurance programs would be required to cover medical marijuana in New York if a new Assembly bill is enacted. “Cost is the primary barrier to patient access in New York’s medical marijuana program,” reads a memo attached to the legislation. “Medicaid, other public health plans, and commercial health insurance plans do not cover … Continue reading New York Bill Would Require Medical Marijuana Be Covered By Public Health Insurance
Plastic composites for automobiles are the second most important component of the hemp industry of the EU. Natural fibers in automobile composites are used primarily in press-molded parts (Fig. 18). There are two widespread technologies. In thermoplastic production, natural fibers are blended with polypropylene fibers and formed into a mat, which is pressed under heat into the desired form. In thermoset production the natural fibers are soaked with binders such as epoxy resin or polyurethane, placed in the desired form, and allowed to harden through polymerization. Hemp has also been used in other types of thermoplastic applications, including injection molding. The characteristics of hemp fibers have proven to be superior for production of molded composites. In European manufacturing of cars, natural fibers are used to reinforce door panels, passenger rear decks, trunk linings, and pillars. In 1999 over 20,000 t of natural fiber were used for these purposes in Europe, including about, 2,000 t of hemp. It has been estimated that 5–10 kg of natural fibers can be used in the molded portions of an average automobile (excluding upholstery). The demand for automobile applications of hemp is expected to increase considerably, depending on the development of new technologies (Karus et al. 2000).

Fig. 3. Photograph of Cannabis sativa. Left, staminate (“male”) plant in flower; right, pistillate (“female”) plant in flower. Fig. 4. United States National Institute of Health, University of Mississippi marijuana plantation site, showing variation in plant size. A tall fiber-type of hemp plant is shown at left, and a short narcotic variety (identified as “Panama Gold”) at right.
Other desirable features of hemp fibers are strength and durability (particularly resistance to decay), which made hemp useful in the past for rope, nets, sail-cloth, and oakum for caulking. During the age of sailing ships, Cannabis was considered to provide the very best of canvas, and indeed this word is derived from Cannabis. Several factors combined to decrease the popularity of hemp in the late 19th and early 20th centuries. Increasing limitation of cheap labor for traditional production in Europe and the New World led to the creation of some mechanical inventions, but too late to counter growing interest in competitive crops. Development of other natural fibers as well as synthetic fibers increased competition for hemp’s uses as a textile fiber and for cordage. Hemp rag had been much used for paper, but the 19th century introduction of the chemical woodpulping process considerably lowered demand for hemp. The demise of the sail diminished the market for canvas. Increasing use of the plant for drugs gave hemp a bad image. All this led to the discontinuation of hemp cultivation in the early and middle parts of the 20th century in much of the world where cheap labor was limited. In the 19th century softer fabrics took over the clothing market, and today, hemp constitutes only about 1% of the natural fiber market. At least some production of hemp for fiber still occurs in Russia, China, the Ukraine, Poland, Hungary, the countries of the former Yugoslavia, Romania, Korea, Chile, and Peru. There has been renewed interest in England, Australia, and South Africa in cultivating fiber hemp. Italy has an outstanding reputation for high-quality hemp, but productivity has waned for the last several decades. In France, a market for high-quality paper, ironically largely cigarette paper, has developed (such paper is completely free of the intoxicating resin). Modern plant breeding in Europe has produced several dozen hemp strains, although by comparison with other fiber crops there are relatively few described varieties of hemp. Since World War II, breeding has been concerned most particularly with the development of monoecious varieties. Gehl (1995) reviewed fiber hemp development in Canada in the early 20th century, and concluded that the prospects for a traditional fiber industry were poor. However, as outlined below, there are now many non-traditional usages for hemp fiber which require consideration. Hemp long fiber is one of the strongest and most durable of natural fibers, with high tensile strength, wet strength, and other characteristics that make it technically suited for various industrial products (Karus and Leson 1996).
Hi, I had ovarian cancer stage 2 and went to do chemotherapy for 16 times in 2014. It came back last year 2016 but I did not do chemotherapy or radiation therapy as suggested by the doctor. I am taking hormone therapy at the moment. I would like to use cannabis oil but which one and how much CBD and how much THC should I take for ovarian cancer? Can anyone give some idea?. Thank you very much.
An alternative to the gateway hypothesis is the common liability to addiction (CLA) theory. It states that some individuals are, for various reasons, willing to try multiple recreational substances. The "gateway" drugs are merely those that are (usually) available at an earlier age than the harder drugs. Researchers have noted in an extensive review that it is dangerous to present the sequence of events described in gateway "theory" in causative terms as this hinders both research and intervention.[259]
There are many ways to prepare cannabis for consumption. And while final marijuana products may come in many forms, each aims to provide rich concentrations of the terpenes, cannabinoids, and other desirable compounds the marijuana plant produces. From the simple process of drying and curing marijuana flowers, to the sophisticated chemistry of producing cannabis concentrates, here’s a guide to the most common forms of cannabis.

Fig. 25. The “hemp house” under construction on the Oglala Lakota Nation (Pine Ridge Reservation), South Dakota. Foundation blocks for the house are made with hemp fiber as a binder in cement. Stucco is also of hemp. Shingles are 60% hemp in a synthetic polymer. Hemp insulation is used throughout. (Courtesy of Oglala Sioux Tribe, Slim Butte Land Use Association, and S. Sauser.)
Dr. Ethan Russo, medical director at Phytecs, a biotechnology company spearheading research into plant- based medicines and the endocannabinoid system, took issue with Titus’s claim, however. “Bioaccumulators can recruit heavy metals from the soil,” Russo said, “but breaking them down would be alchemy.” Government regulation of the pharmaceutical industry is designed to protect consumers from unfounded scientific claims.
Hemp activist and entrepreneur Joy Beckerman, who has spent decades building the US hemp movement, and assists many of the world's leading hemp advocacy and industry groups, said it's still likely that Congress will pass a pro-hemp version of the Farm Bill in the coming months — hopefully without added blows to communities that have been hurt most by nearly a century of cannabis prohibition.
The “re-“growth of industrial hemp in the United States is heavily regulated, although the neighbouring nation of Canada successfully grows hemp commercially.  Since becoming legal to grow again in Canada, the crop has taken off and has become a booming multi-million dollar export.  Hemp building materials are another growing segment of the hemp industry.  Canada is now a leader in the global hemp food/health marketplace.  Canadian hemp products can be found in many hemp markets now in the United States and the world over.
Furthermore, medical cannabis use is legal in many more places than recreational marijuana use. Current research, alongside patient and caregiver testimony, attests to the many medicinal applications of marijuana. From pain to serious neurological diseases, medical cannabis is emerging as a safe and viable alternative to many common prescription medications.
Disclaimer: The entire contents of this website are based upon the opinions of Dr. Mercola, unless otherwise noted. Individual articles are based upon the opinions of the respective author, who retains copyright as marked. The information on this website is not intended to replace a one-on-one relationship with a qualified health care professional and is not intended as medical advice. It is intended as a sharing of knowledge and information from the research and experience of Dr. Mercola and his community. Dr. Mercola encourages you to make your own health care decisions based upon your research and in partnership with a qualified health care professional. If you are pregnant, nursing, taking medication, or have a medical condition, consult your health care professional before using products based on this content.
CBD oil 4% is a medium-strength, organic formulation. Now, you can supplement with the confidence of a king or queen! If you are already familiar with CBD and find you require a little more than what's offered by our 2.5% formulation, this is the CBD oil for you. CBD oil 4% is derived from EU hemp strains bred for a high CBD content. Natural, GMO-free, and non-psychoactive. Available now in convenient 10, 30 and 50ml dropper bottles.
Dosage is important, because CBD can have side effects—the most common are tiredness, diarrhea, and changes in appetite and weight—so it’s best not to take more than you need. As CBD becomes more prevalent, says J. Michael Bostwick, M.D., a psychiatrist at Mayo Clinic in Rochester, MN, “I’m reasonably certain new kinds of side effects will emerge.”
so you can just make up a new plant because it don’t get the user high? Hemp is Cannabis. PERIOD. The Farm Bill and No amount of silly dialog can create a new botanical entry. Hemp IS Cannabis. Cannabis Ruderalis, native to Russia, also called ditch weed….may be imported as Hemp but it IS Cannabis Ruderalis. The semantic name calling game is kept in motion because it serves the desires of those that profit on the confusion. Bottomline, there is Cannabis. Some Cannabis can be used to fight disease. Oligodenroglioma (in my case) and some of it can be used to alter one’s outlook……but it’s all Cannabis. Grow it in South Carolina and call it Hemp, I say God bless you, bring it to my lab and it comes out as cannabis and it’s going to be called Cannabis. Disclaimer, while I do have oligodendroglioma, I do not personally have a lab ;). M.
Hemp is a multi-purpose agricultural crop delivering seeds, fibers and bio-active chemicals for a number of uses and markets. Industrial hemp is defined in federal and Montana statute as Cannabis sativa L. that contains no more than 0.3% delta-9 tetrahydrocannabinol (THC). Industrial hemp is authorized as an alternative agricultural crop by the Montana Legislature, Section 80-18-101 through 80-18-111 of Montana Code Annotated.

Hemp, grown under license mostly in Canada, is the most publicized “new” crop in North America. Until very recently the prohibition against drug forms of the plant prevented consideration of cultivation of fiber and oilseed cultivars in Canada. However, in the last 10 years three key developments occurred: (1) much-publicized recent advances in the legal cultivation of hemp in western Europe, especially for new value-added products; (2) enterprising farmers and farm groups became convinced of the agricultural potential of hemp in Canada, and obtained permits to conduct experimental cultivation; and (3) lobby groups convinced the government of Canada that narcotic forms of the hemp plant are distinct and distinguishable from fiber and oilseed forms. In March 1998, new regulations (under the Controlled Drugs and Substances Act) were provided to allow the commercial development of a hemp industry in Canada, and since then more than a thousand licenses have been issued. Hectares licensed for cultivation for 1998–2001 were respectively, 2,500, 14,200, 5,487, and 1,355, the decreasing trend due to a glut of seed produced in 1999 and pessimism over new potential regulations barring exports to the US. Information on the commercial potential of hemp in Canada is in Blade (1998), Marcus (1998), and Pinfold Consulting (1998). In the US, a substantial trade in hemp products has developed, based on imports of hemp fiber, grain, and oil. The American agricultural community has observed this, and has had success at the state level in persuading legislators of the advisability of experimental hemp cultivation as a means of evaluating the wisdom of re-establishing American hemp production. However, because of opposition by the federal government, to date there has only been a small experimental plot in Hawaii. Information on the commercial potential of hemp in the US is presented in the following.
In short, Cannabidiol – or CBD – is a cannabis compound that has many therapeutic benefits. Usually extracted from the leaves and flowers of hemp plants – though marijuana can also be a source – CBD oil is then incorporated into an array of marketable products. These products vary from the most common, like sublingual oils and topical lotions, to the less common (think CBD lattes). Basically, if you can dream it, you can buy it.

As a consumer, you can look at the manufacturer's website to see whether they batch-test their products, or ask them directly. You could also send a sample of your CBD oil to a testing facility yourself, something Bonn-Miller says he would do if he were trying to treat someone with a severe issue such as epilepsy. Testing can also determine whether the product contains pesticides, heavy metals, or other toxins.
Cannabis, (genus Cannabis), plant belonging to the family Cannabaceae of the nettle order (Urticales). By some classifications, the genus Cannabis comprises a single species, hemp (Cannabis sativa), a stout, aromatic, erect annual herb that originated in Central Asia and is now cultivated worldwide, including in Europe, southern Asia, the Middle East, India, Africa, and the Americas. A tall canelike variety is raised for the production of hemp fibre, while the female plant of a short branchier variety is prized as the more abundant source of the psychoactive substance tetrahydrocannabinol (THC), the active ingredient of marijuana.

Designed to provide the optimum absorption of CBD into the blood stream by employing a patented slow release delivery system. It’s well accepted that CBD is most effective when taken sublingualy, however most oils when taken in this way are swallowed and broken down by your body. The Gel-Tab™. is placed under the tongue and the CBD is slowly absorbed resulting in higher rates of CBD being absorbed than what would be achieved with a normal oil


APPLICATIONS ARE NOW AVAILABLE for the 2019 Industrial Hemp Research Pilot Program. You can access the Grower Application Packet, the Processor/Handler Application Packet, and the University/College Affiliation Application Packet on the Program Page titled "Applications for the Hemp Program" in the right side bar (or scroll further down on mobile devices) or through the green link in the description below. Complete instructions and guidelines for applicants are contained in the application packets. Grower applications are due November 30, 2018 at 4:30 PM Eastern Time.
“With more than 2,000 wine and liquor stores from Buffalo to Montauk, we offer existing retail space with quick and cheap access to the market in every corner of the state,” reads the website for the group, which is called The Last Store on Main Street. “That means more tax revenue, and sooner, for the State to fulfill basic responsibilities and invest in the future of our neighborhoods.”
Support for legalization has steadily grown over the last several years. Today, medical marijuana is legal in 23 states and the District of Columbia. And even federal officials have begun to soften their stances. Last fall, outgoing Attorney General Eric Holder signaled his support for removing marijuana from the list of Schedule I narcotics. “I think it’s certainly a question we need to ask ourselves, whether or not marijuana is as serious of a drug as heroin,” Holder said. This summer, Chuck Rosenberg, the acting administrator of the U.S. Drug Enforcement Administration, acknowledged that marijuana is not as dangerous as other Schedule I drugs and announced his agents would not be prioritizing marijuana enforcement. Still, as long as marijuana remains illegal under federal law, the haphazard system in which it is studied, produced, and distributed will remain, and Americans will not be able to take full advantage of its medicinal properties.
^ Jump up to: a b Deitch, Robert (2003). Hemp: American History Revisited: The Plant with a Divided History. Algora Publishing. pp. 4–26. ISBN 9780875862262. Retrieved 2013-11-16. Cannabis is ... a plant that played an important role in colonial America's prosperous economy and remained a valuable commercial commodity up until the Second World War.
Dehulled (i.e. hulled) hemp seed is a very recent phenomenon, first produced in quantity in Europe. Hemp seeds have been used as food since ancient times, but generally the whole seed, including the hull, was eaten. Hemp seed was a grain used in ancient China, although there has been only minor direct use of hemp seed as food by humans. In the past, hemp seed has generally been a food of the lower classes, or a famine food. Peanut-butter type preparations have been produced from hemp seed in Europe for centuries, but were rather gritty since technology for removing the hulls was rudimentary. Modern seed dehulling using mechanical separation produces a smooth, white, gritless hemp seed meal that needs no additional treatment before it is consumed. It is important to understand, therefore, that the quality of modern hemp seed for human consumption far exceeds anything produced historically. This seed meal should be distinguished from the protein-rich, oil-poor seed cake remaining after oil has been expressed, that is used for livestock feed. The seed cake is also referred to as “seed meal,” and has proven to be excellent for animals (Mustafa et al. 1999).

A 2012 review found that the THC content in marijuana had increased worldwide from 1970 to 2009.[150] It is unclear, however, whether the increase in THC content has caused people to consume more THC or if users adjust based on the potency of the cannabis. It is likely that the higher THC content allows people to ingest less tar. At the same time, CBD levels in seized samples have lowered, in part because of the desire to produce higher THC levels and because more illegal growers cultivate indoors using artificial lights. This helps avoid detection but reduces the CBD production of the plant.[151]
Scientists in Europe and North America concluded that hemp seed is an excellent source of nutrition. Numerous anecdotal incidences cited improvements in a wide range of acute and chronic conditions such as rapid healing of skin lesions and relief from flu, inflammation, and allergies. The benefits were attributed to the presence of rich source of the EFAs linoleic and alpha-linolenic acid, and their respective biologic metabolites, GLA and stearidonic acid.9
"Cannabinoids have been found to have antioxidant properties, unrelated to NMDA receptor antagonism. This new found property makes cannabinoids useful in the treatment and prophylaxis of wide variety of oxidation associated diseases, such as ischemic, age-related, inflammatory and autoimmune diseases. The cannabinoids are found to have particular application as neuroprotectants, for example in limiting neurological damage following ischemic insults, such as stroke and trauma, or in the treatment of neurodegenerative diseases, such as Alzheimer's disease, Parkinson's disease and HIV dementia.
The most widespread claim for environmental friendliness of hemp is that it has the potential to save trees that otherwise would be harvested for production of lumber and pulp. Earlier, the limitations of hemp as a pulp substitute were examined. With respect to wood products, several factors appear to favor increased use of wood substitutes, especially agricultural fibers such as hemp. Deforestation, particularly the destruction of old growth forests, and the world’s decreasing supply of wild timber resources are today major ecological concerns. Agroforestry using tree species is one useful response, but nevertheless sacrifices wild lands and biodiversity, and is less preferable than sustainable wildland forestry. The use of agricultural residues (e.g. straw bales in house construction) is an especially environmentally friendly solution to sparing trees, but material limitations restrict use. Another chief advantage of several annual fiber crops over forestry crops is relative productivity, annual fiber crops sometimes producing of the order of four times as much per unit of land. Still another important advantage is the precise control over production quantities and schedule that is possible with annual crops. In many parts of the world, tree crops are simply not a viable alternative. “By the turn of the century 3 billion people may live in areas where wood is cut faster than it grows or where fuelwood is extremely scarce” (World Commission on Environment and Development 1987). “Since mid-century, lumber use has tripled, paper use has increased six-fold, and firewood use has soared as Third World populations have multiplied” (Brown et al. 1998). Insofar as hemp reduces the need to harvest trees for building materials or other products, its use as a wood substitute will tend to contribute to preserving biodiversity. Hemp may also enhance forestry management by responding to short-term fiber demand while trees reach their ideal maturation. In developing countries where fuelwood is becoming increasingly scarce and food security is a concern, the introduction of a dual-purpose crop such as hemp to meet food, shelter, and fuel needs may contribute significantly to preserving biodiversity.
Although always sold at a premium price, hemp clothing has a natural appeal to a sector of the population. Hemp clothes are resistant to abrasion, but are typically abrasive. However, appropriate processing and blending with other natural fibers has significantly improved the “feel” of the product, and in China hemp textiles indistinguishable from fine linens in texture are available. Weaving of hemp fibers into textiles and apparel is primarily done in China, Hungary, Romania, Russia, and the Ukraine. Processing costs are higher for industrial hemp because the fibers vary from the standard specifications for fiber length and diameter established for the equipment used in most textile and apparel factories, necessitating the use of specialty machines. The North American hemp apparel industry today is based on fiber, yarn, and fabrics imported from Eastern Europe and China. The extraction technology and spinning facilities, to say nothing of much lower labor costs, make it very difficult for the potential development of a hemp textile industry in North America. The fact that spinning facilities for natural fibers are so concentrated in China is making it increasingly difficult to competitively produce hemp fabrics elsewhere. This of course lessens the value-added future of growing hemp for a potential textile industry in North America. It is possible, however, that new technologies could change this situation, and especially in the EU development is underway to establish a fledgling domestic hemp textile industry. In addition to textiles used in clothing, coarser woven cloth (canvas) is used for upholstery, bags, sacks, and tarpaulins. There is very little effort in North America to produce such woven products, and non-woven material (Fig. 15) can be more easily produced. Hempline in Ontario, the first firm to grow hemp for commercial purposes in North America since the second word war (starting with experimental cultivation in 1994), is the exception, and is concerned with production of fiber for upholstery and carpeting.
“Specialty pulp” is the most important component of the hemp industry of the EU, and is expected to remain its core market for the foreseeable future. The most important specialty pulp products made from hemp are cigarette paper (Fig. 16), bank notes, technical filters, and hygiene products. Other uses include art papers and tea bags. Several of these applications take advantage of hemp’s high tear and wet strength. This is considered to be a highly stable, high-priced niche market in Europe, where hemp has an 87% market share of the “specialty pulp” sector (Karus et al. 2000). In Europe, decortication/refining machines are available that can produce 10 t/hour of hemp fiber suitable for such pulp use. North American capacity for hemp pulp production and value-added processing is much more limited than that of Europe, and this industry is negligible in North America.

More recently, Sakamoto and various co-authors[34][35] have used RAPD to isolate several genetic marker sequences that they name Male-Associated DNA in Cannabis (MADC), and which they interpret as indirect evidence of a male chromosome. Several other research groups have reported identification of male-associated markers using RAPD and AFLP.[36][24][37] Ainsworth commented on these findings, stating,
My husband was diagnosed with ALS (amyotrophic lateral sclerosis) when he was 61 years old 4 years ago. The Rilutek (riluzole) did very little to help him. The medical team did even less. His decline was rapid and devastating. His arms weakened first, then his hands and legs. Last year, a family friend told us about Rich Herbs Foundation (RHF) and their successful ALS TREATMENT, we visited their website www. richherbsfoundation. com and ordered their ALS/MND Formula, i am happy to report the treatment effectively treated and reversed his Amyotrophic Lateral Sclerosis (ALS), most of the symptoms stopped, he is able to walk and able to ride his treadmill again, he is pretty active now.
PDQ is a registered trademark. Although the content of PDQ documents can be used freely as text, it cannot be identified as an NCI PDQ cancer information summary unless it is presented in its entirety and is regularly updated. However, an author would be permitted to write a sentence such as “NCI’s PDQ cancer information summary about breast cancer prevention states the risks succinctly: [include excerpt from the summary].”
You cannot have a fatal overdose from cannabis use. However, if you have too much in one session it can lead to a very unpleasant experience. Anxiety and panic attacks, disorientation, and inability to focus are all signs you have had too much. Other negative effects from taking too much include loss of coordination, shortness of breath, increased heart rate and shaking, chills and sweats. 
The pulp and paper industry based on wood has considered the use of hemp for pulp, but only on an experimental basis. Hemp’s long fibers could make paper more recyclable. Since virgin pulp is required for added strength in the recycling of paper, hemp pulp would allow for at least twice as many cycles as wood pulp. However, various analyses have concluded that the use of hemp for conventional paper pulp is not profitable (Fertig 1996).
Cannabinoids may also contribute to pain modulation through an anti-inflammatory mechanism; a CB2 effect with cannabinoids acting on mast cell receptors to attenuate the release of inflammatory agents, such as histamine and serotonin, and on keratinocytes to enhance the release of analgesic opioids has been described.[45-47] One study reported that the efficacy of synthetic CB1- and CB2-receptor agonists were comparable with the efficacy of morphine in a murine model of tumor pain.[48]
Hemp does best on a loose, well-aerated loam soil with high fertility and abundant organic matter. Well-drained clay soils can be used, but poorly-drained clay soils are very inappropriate because of their susceptibility to compaction, which is not tolerated. Young plants are sensitive to wet or flooded soils, so that hemp must have porous, friable, well-drained soils. Sandy soils will grow good hemp, provided that adequate irrigation and fertilization are provided, but doing so generally makes production uneconomical. Seedbed preparation requires considerable effort. Fall plowing is recommended, followed by careful preparation of a seedbed in the spring. The seedbed should be fine, level, and firm. Seed is best planted at 2–3 cm (twice as deep will be tolerated). Although the seedlings will germinate and survive at temperatures just above freezing, soil temperatures of 8°–10°C are preferable. Generally hemp should be planted after danger of hard freezes, and slightly before the planting date of maize. Good soil moisture is necessary for seed germination, and plenty of rainfall is needed for good growth, especially during the first 6 weeks. Seeding rate is specific to each variety, and this information should be sought from the supplier. Fiber strains are typically sown at a minimum rate of 250 seeds per m2 (approximately 45 kg/ha), and up to three times this density is sometimes recommended. In western Europe, seeding rates range from 60–70 kg/ha for fiber cultivars. Recommendations for seeding rates for grain production vary widely, from 10–45 kg/ha. Densities for seed production for tall, European, dual-purpose cultivars are less than for short oilseed cultivars. Low plant densities, as commonly found in growing tall European cultivars for seed, may not suppress weed growth adequately, and under these circumstances resort to herbicides may pose a problem for those wishing to grow hempseed organically. Hemp requires about the same fertility as a high-yielding crop of wheat. Industrial hemp grows well in areas that corn produces high yields. Growing hemp may require addition of up to 110 kg/ha of nitrogen, and 40–90 kg/ha of potash. Hemp particularly requires good nitrogen fertilization, more so for seed production than fiber. Adding nitrogen when it is not necessary is deleterious to fiber production, so that knowledge of the fertility of soils being used is very important. Organic matter is preferably over 3.5%, phosphorus should be medium to high (>40 ppm), potassium should be medium to high (>250 ppm), sulfur good (>5,000 ppm), and calcium not in excess (<6,000 ppm).
In 1937, the Marijuana Tax Act strictly regulated the cultivation and sale of all cannabis varieties. The Controlled Substances Act of 1970 classified all forms of cannabis — including hemp — as a Schedule I drug, making it illegal to grow it in the United States (which is why we’re forced to import hemp from other countries as long as it contains scant levels of THC — 0.3% is the regulation for hemp cultivation in the European Union and Canada). As a result of this long-term prohibition, most people have forgotten the industrial uses of the plant and continue to misidentify hemp with its cannabis cousin, marijuana.
Hemp production has been legalized in North Carolina, but only as part of the state's pilot program as allowed under federal law. As such, it will still be awhile before the first fields are planted. The N.C. General Assembly passed Senate Bill 313 in 2015, allowing the Industrial Hemp Commission to develop the rules and licensing structure necessary to stay within federal laws. The law was modified in 2016 in House Bill 992. The Industrial Hemp Commission adopted temporary rules for review in February 2017. The Rules Review Commission of the Office of Administrative Hearings voted to approve these rules Feb. 16.
"The dairy industry is really in trouble, and so, one of the things that I find really important is finding value-added products," Gilbert Jenkins said. "I am not an et. al scientist, I am not a dairy farmer, but I know about the crops that they grow. Having an opportunity to grow a crop -- even on just a portion of the acres -- that could bring in new income."
All this means that scientists can still only obtain marijuana-derived CBD from farms licensed by the National Institute on Drug Abuse (which until this year meant only one farm owned by the University of Mississippi). As for whether you should have a preference for CBD that comes from hemp, marijuana, or a pure synthetically produced version, there are some theories that THC—and even the smell and taste of cannabis—might make CBD more effective, but Bonn-Miller says these ideas have yet to be proven.
This may be a good place to point out that not all CBD products are created equal. The industry is still largely unregulated, and the quality and quantity of CBD in a given product will vary wildly. Third party testing definitely helps to monitor companies’ claims, but it’s still up to you as the consumer to do your homework on the best CBD products.
Some users may experience an episode of acute psychosis, which usually abates after six hours, but in rare instances, heavy users may find the symptoms continuing for many days.[52] A reduced quality of life is associated with heavy cannabis use, although the relationship is inconsistent and weaker than for tobacco and other substances.[53] It is unclear, however, if the relationship is cause and effect.[53]
The gateway effect may appear due to social factors involved in using any illegal drug. Because of the illegal status of cannabis, its consumers are likely to find themselves in situations allowing them to acquaint with individuals using or selling other illegal drugs.[256][257] Utilizing this argument some studies have shown that alcohol and tobacco may additionally be regarded as gateway drugs;[258] however, a more parsimonious explanation could be that cannabis is simply more readily available (and at an earlier age) than illegal hard drugs. In turn alcohol and tobacco are easier to obtain at an earlier point than is cannabis (though the reverse may be true in some areas), thus leading to the "gateway sequence" in those individuals since they are most likely to experiment with any drug offered.[249]
Molecular analytical techniques developed in the late 20th century are being applied to questions of taxonomic classification. This has resulted in many reclassifications based on evolutionary systematics. Several studies of Random Amplified Polymorphic DNA (RAPD) and other types of genetic markers have been conducted on drug and fiber strains of Cannabis, primarily for plant breeding and forensic purposes.[73][74][24][75][76] Dutch Cannabis researcher E.P.M. de Meijer and coworkers described some of their RAPD studies as showing an "extremely high" degree of genetic polymorphism between and within populations, suggesting a high degree of potential variation for selection, even in heavily selected hemp cultivars.[36] They also commented that these analyses confirm the continuity of the Cannabis gene pool throughout the studied accessions, and provide further confirmation that the genus consists of a single species, although theirs was not a systematic study per se.

Jump up ^ Devinsky, Orrin; Cilio, Maria Roberta; Cross, Helen; Fernandez-Ruiz, Javier; French, Jacqueline; Hill, Charlotte; Katz, Russell; Di Marzo, Vincenzo; Jutras-Aswad, Didier; Notcutt, William George; Martinez-Orgado, Jose; Robson, Philip J.; Rohrback, Brian G.; Thiele, Elizabeth; Whalley, Benjamin; Friedman, Daniel (22 May 2014). "Cannabidiol: Pharmacology and potential therapeutic role in epilepsy and other neuropsychiatric disorders". Epilepsia. 55 (6): 791-802. doi:10.1111/epi.12631. PMC 4707667. PMID 24854329.
Please note that we are not qualified to give medical advice. ur CBD oil is made from high quality hemp at 5% and has a base of extra virgin olive oil. CBD oil has less than 0.2% THC in it, that's one of the reasons why it's legal in the first place. The effects will vary from person to person, but we are receiving very good feedback from customers who have bought our oil. We always recommend to start with a small dosage and increase if you do not feel any effect.
In the United States, non-FDA approved CBD products are classified as Schedule I drugs under the Controlled Substances Act.[63] This means that production, distribution, and possession of non-FDA approved CBD products is illegal under federal law. In addition, in 2016 the Drug Enforcement Administration added "marijuana extracts" to the list of Schedule I drugs, which it defined as "an extract containing one or more cannabinoids that has been derived from any plant of the genus Cannabis, other than the separated resin (whether crude or purified) obtained from the plant."[64] Previously, CBD had simply been considered "marijuana", which is a Schedule I drug.[63][65]
Another concern is about medications with which CBD might interact. This won’t be an issue with most drugs, says Sunil Kumar Aggarwal, M.D., Ph.D., a palliative medicine physician and scientist who studies cannabis and integrates it into his Seattle medical practice. The exceptions are blood thinners, IV antibiotics, and other drugs whose exact dosing is crucial and must be monitored closely, he says. (Of course, if you have a health problem, talk to your doctor before using CBD, and never take it instead of seeing your physician for a serious condition.)
Some manufacturers ship CBD products nationally, an illegal action which the FDA has not enforced in 2018, with CBD remaining as the subject of an FDA investigational new drug evaluation and is not considered legal as a dietary supplement or food ingredient as of November 2018.[71] CBD is openly sold in head shops and health food stores in some states where such sales have not been explicitly legalized.[72][73]
Medical reviews published in 2017 and 2018 incorporating numerous clinical trials concluded that cannabidiol is an effective treatment for certain types of childhood epilepsy.[19][20] An orally administered cannabidiol solution (brand name Epidiolex) was approved by the US Food and Drug Administration in June 2018 as a treatment for two rare forms of childhood epilepsy, Lennox-Gastaut syndrome and Dravet syndrome.[13]
^ Jump up to: a b Batalla A, Bhattacharyya S, Yücel M, Fusar-Poli P, Crippa JA, Nogué S, Torrens M, Pujol J, Farré M, Martin-Santos R (2013). "Structural and functional imaging studies in chronic cannabis users: a systematic review of adolescent and adult findings". PLOS One. 8 (2): e55821. doi:10.1371/journal.pone.0055821. PMC 3563634. PMID 23390554. The most consistently reported brain alteration was reduced hippocampal volume which was shown to persist even after several months of abstinence in one study and also to be related to the amount of cannabis use Other frequently reported morphological brain alterations related to chronic cannabis use were reported in the amygdala the cerebellum and the frontal cortex...These findings may be interpreted as reflecting neuroadaptation, perhaps indicating the recruitment of additional regions as a compensatory mechanism to maintain normal cognitive performance in response to chronic cannabis exposure, particularly within the prefrontal cortex area.
Industrial hemp is marketed a fiber, as a seed, or as a dual-purpose crop. Although detailed market information for hemp ins not readily available, estimates from Vote Hemp show that the total retail value of hemp products in the U.S. in 2017 was $820 million. This includes food and body products, clothing, auto parts, building materials, and other products.
Jump up ^ Morales, Paula; Hurst, Dow P.; Reggio, Patricia H. (2017). "Molecular Targets of the Phytocannabinoids: A Complex Picture". In Kinghorn, A. Douglas; Falk, Heinz; Gibbons, Simon; Kobayashi, Jun'ichi. Phytocannabinoids: Unraveling the Complex Chemistry and Pharmacology of Cannabis sativa. Progress in the Chemistry of Organic Natural Products. 103. Springer International Publishing. pp. 103–131. doi:10.1007/978-3-319-45541-9_4. ISBN 978-3-319-45539-6. PMC 5345356. PMID 28120232.
In fact, numerous studies have looked at the relationship between CBD and pain, and the results are promising. Researchers have looked at various kinds of pain – from joint pain to cancer pain. One finding is that CBD increases levels of glutamate and serotonin – both neurotransmitters that play a role in pain regulation. And CBD’s anti-inflammatory properties help by tackling the root cause of much chronic pain.
All other applicable federal and state regulations apply to the production of hemp products for human consumption and other uses (e.g. FDA, DPHHS). This list is not all inclusive and just includes examples of potential products from the pilot program. Pilot participants are allowed to harvest and process any hemp seed, oils, fiber, and hurd that they produce. They may process these items themselves or sell them for processing or use. All hemp produced must be processed before leaving Montana. Commercial production outside the Montana Hemp Pilot Program is not currently allowed under state or federal law.
Salve, scusate la domanda banale. La titolazione al 10% indica 1000 mg. Questo vuole indicare che in ogni goccia ci sono 1000 mg di CBD? Io soffro di dolore cronico, fibromialgia, colon irritabile. Voglio acquistare la titolazione alta ma non comprendo perfettamente il dosaggio. Sulla base della vostra tabella patologia/dosaggio ho letto di usare 20 mg per circa 25 giorni..ma non capisco a questo punto come regolarmi. Mi sapreste indicare voi in gocce come devo utilizzarlo? Grazie
Cannabis (/ˈkænəbɪs/) is a genus of flowering plants in the family Cannabaceae. The number of species within the genus is disputed. Three species may be recognized: Cannabis sativa, Cannabis indica, and Cannabis ruderalis; C. ruderalis may be included within C. sativa; or all three may be treated as subspecies of a single species, C. sativa.[1][2][3][4] The genus is widely accepted as being indigenous to and originating from Central Asia, with some researchers also including upper South Asia in its origin.[5][6]
I have digenerative disc disease/4 bulgin discs was taking 9---10mg hydrocodones a day... i started with 3 drops of 300mg and within 5 mins started feeling better than i have theses last 6 years or so... not only that, the inflamation has decrease substantially, i wake up with energy and have begun to work out again... if im making it seem like a miracle drug... its because it is... so the first week i took 3 drops twice a day... now 3 weeks in... im taking about 5 drops 3 times a day and zero pain pills... for the first time in years i have taken control of my life agin... not depending on doctor scripts/bills etc....

Cannabis by Product

×