Cannabis is indigenous to Central Asia and Indian subcontinent,[183] and its use for fabric and rope dates back to the Neolithic age in China and Japan.[184][185] It is unclear when cannabis first became known for its psychoactive properties; some scholars suggest that the ancient Indian drug soma, mentioned in the Vedas, was cannabis, although this theory is disputed.[186]
Selective breeding of cannabis plants has expanded and diversified as commercial and therapeutic markets develop. Some growers in the U.S. succeeded in lowering the proportion of CBD-to-THC to accommodate customers who preferred varietals that were more mind-altering due to the higher THC and lower CBD content.[58] Hemp is classified as any part of the cannabis plant containing no more than 0.3% THC in dry weight form (not liquid or extracted form).[59]

Hemp is the fiber and seed part of the Cannabis Sativa L. plant, opposed to the flower part of the plant which is “legally considered” marijuana.  The fiber and seeds are incredible valuable and is why hemp is often called a “cash crop”.  Hemp is a very hearty plant and grows very quickly in very diverse soil conditions.  Cultivation of hemp for industrial purposes has been done by many civilizations for over 12,000 years.   Industrial hemp was the desired fiber used to manufacture rope, canvas, paper, and clothing until alternative textiles and synthetics for these purposes were discovered.  Although China has been the largest hemp producer over the years, other countries such as Australia and Canada are catching up.  It has been illegal for anyone to grow hemp in the United States as hemp is illegal under the marijuana prohibition act but Colorado has changed the laws and paved the way for industrial hemp production again in the United States(see hemp history). Now hemp oils, hemp plastics, hemp building materials and many hemp fiber products can be seen and purchased on the market. Hemp is truly an amazing plant with the potential to help “green up” many industries.
"The data supporting efficacy and dosing are specific to one product: Epidiolex," Bonn-Miller says. "That's not necessarily translatable to 'Joe Bob's CBD Blend.'" A CBD extract you buy online or in a dispensary will almost certainly have less CBD in it, he explains, and will contain other cannabinoids—meaning that it will work differently and will need to be dosed differently. "This is not to say that 'Joe Bob's CBD Blend' definitely isn't going to be effective for pediatric epilepsy, but it means that we need to study it before we know."
A 2016 review of animal studies indicated that cannabidiol has potential as an anxiolytic for relief of anxiety-related disorders and fear.[11] Reviews of preliminary research showed cannabidiol has potential for improving addictive disorders and drug dependence, although as of 2016, they indicated limited high-quality evidence for anti-addictive effects in people.[88][89][90]
What is cannabis?Cannabis is a drug that comes from Indian hemp plants such as Cannabis sativa and Cannabis indica. The main active chemical in cannabis is THC (delta-9 tetrahydrocannabinol).Cannabis is a depressant drug. Depressant drugs do not necessarily make you feel depressed. Rather, they slow down the activity of the central nervous system and the messages going between the brain and the body. When large doses of cannabis are taken it may also produce hallucinogenic effects.For information on synthetic cannabinoids, see our "Legal high" facts page.Other namesCannabis is also known as grass, pot, hash, weed, reefer, dope, herb, mull, buddha, ganja, joint, stick, buckets, cones, skunk, hydro, yarndi, smoke and hooch.What does cannabis look like?Leaves from the cannabis plant are bright green and have a distinctive shape with five or seven leaflets. The flowering tops and upper leaves are covered in a sticky resin.Cannabis is used for the psychoactive (mind and mood-altering) effects of THC and other active ingredients. THC is the chemical in cannabis that makes you feel “high”.There are three main forms of psychoactive cannabis: marijuana, hashish and hash oil.Marijuana is the most common and least potent form of cannabis. Marijuana is the dried leaves and flowers of the plant.Hashish (“hash”) is dried cannabis resin, usually in the form of a small block. The concentration of THC in hashish is higher than in marijuana, producing stronger effects.Hash oil is a thick, oily liquid, golden brown to black in colour, which is extracted from cannabis. Hash oil is the strongest form of cannabis.How and why is it used?The different forms of cannabis are used in different ways:Marijuana is smoked in hand-rolled cigarettes (joints), or in a pipe (a bong).Hashish is usually added to tobacco and smoked, or baked and eaten in foods such as hash cookies.Hash oil is usually spread on the tip or paper of a cigarette and then smoked.Cannabis and hash can also be smoked in a vaporiser. Vaporisers heat cannabis to temperatures that release its active ingredients while minimising the toxins associated with burning.The THC in cannabis is absorbed into the bloodstream through the walls of the lungs (if smoked), or through the walls of the stomach and intestines (if eaten). The bloodstream carries the THC to the brain, producing the “high” effects. Drugs inhaled get into the bloodstream quicker than those eaten. This means that the effects of cannabis when smoked occur more rapidly than when eaten.Paper and textilesSome species of cannabis have few psychoactive effects. These plants are used to produce hemp fibre for use in paper, textiles and clothing.Medical usesCannabis has been used for medical purposes for many centuries. It has been reported that cannabis may be useful to help conditions such as:nausea and vomiting, particularly when associated with chemotherapywasting and severe weight loss, in people with HIV/AIDS, cancer, or anorexia nervosa, as it may be used as an appetite stimulantpain relief, for example in people with cancer and arthritisrelief from symptoms of some neurological disorders that involve muscle spasms, including multiple sclerosis and spinal cord injuryglaucomaepilepsyasthma.For more information, please click on the Australian Drug Foundation's DrugInfo Clearinghouse web site link below.
Marijuana or marihuana (herbal cannabis),[157] consists of the dried flowers and subtending leaves and stems of the female Cannabis plant.[158][159][160][161] This is the most widely consumed form,[161] containing 3% to 20% THC,[162] with reports of up-to 33% THC.[163] This is the stock material from which all other preparations are derived. Although herbal cannabis and industrial hemp derive from the same species and contain the psychoactive component (THC), they are distinct strains with unique biochemical compositions and uses. Hemp has lower concentrations of THC and higher concentrations of CBD, which decreases the psychoactive effects[164][165]
However, it is important to note that the production of derivatives or products made from whole industrial hemp plants, including sprouts, or the leaves, flowers or bracts of those plants, cannot be authorized by a licence issued under the IHR. Most activities with whole industrial hemp plants, including sprouts, or with the leaves, flowers or bracts of the plant, fall outside of the application of the IHR. These activities are controlled under the CDSA and are not authorized under the IHR."
Designed to provide the optimum absorption of CBD into the blood stream by employing a patented slow release delivery system. It’s well accepted that CBD is most effective when taken sublingualy, however most oils when taken in this way are swallowed and broken down by your body. The Gel-Tab™. is placed under the tongue and the CBD is slowly absorbed resulting in higher rates of CBD being absorbed than what would be achieved with a normal oil
Cannabinoids are a class of compounds that interact with receptors throughout your body. CBD is just one of dozens of cannabinoids found in cannabis, including tetrahydrocannabinol (THC), which is the one responsible for marijuana’s famous high. Medical cannabis is technically any cannabis product used for medicinal purposes, and these can contain THC or CBD or both, said Nick Jikomes, a neuroscientist at Leafly, a website that provides information about legal cannabis. “A common mistake people make is to think that CBD is ‘the medical cannabinoid’ and THC is ‘the recreational cannabinoid.’” That’s inaccurate, he said, because THC is a potent anti-inflammatory and can be helpful for pain.

If you live in a state where CBD is legal for your condition, it’s best to buy it from a state-regulated dispensary. But even there, oversight is uneven. “I feel safe being a cannabis consumer in Colorado, since the state tracks everything from seed to sale, but I didn’t the first few years after cannabis became legal,” when the rules were still taking shape, says Robyn Griggs Lawrence, the Boulder author of The Cannabis Kitchen Cookbook, which features recipes for cannabis edibles.


The above uses are based on hemp as a mechanical strengthener of materials. Hemp can also be chemically combined with materials. For example, hemp with gypsum and binding agents may produce light panels that might compete with drywall. Hemp and lime mixtures make a high quality plaster. Hemp hurds are rich in silica (which occurs naturally in sand and flint), and the hurds mixed with lime undergo mineralization, to produce a stone-like material. The technology is most advanced in France (Fig. 26). The mineralized material can be blown or poured into the cavities of walls and in attics as insulation. The foundations, walls, floors, and ceilings of houses have been made using hemp hurds mixed with natural lime and water. Sometimes plaster of Paris (pure gypsum), cement, or sand is added. The resulting material can be poured like concrete, but has a texture vaguely reminiscent of cork—much lighter than cement, and with better heat and sound-insulating properties. An experimental “ceramic tile” made of hemp has recently been produced (Fig. 27).
Cannabis (/ˈkænəbɪs/) is a genus of flowering plants in the family Cannabaceae. The number of species within the genus is disputed. Three species may be recognized: Cannabis sativa, Cannabis indica, and Cannabis ruderalis; C. ruderalis may be included within C. sativa; or all three may be treated as subspecies of a single species, C. sativa.[1][2][3][4] The genus is widely accepted as being indigenous to and originating from Central Asia, with some researchers also including upper South Asia in its origin.[5][6]
Animal studies have suggested a synergistic analgesic effect when cannabinoids are combined with opioids. The results from one pharmacokinetic interaction study have been reported. In this study, 21 patients with chronic pain were administered vaporized Cannabis along with sustained-release morphine or oxycodone for 5 days.[57] The patients who received vaporized Cannabis and sustained-release morphine had a statistically significant decrease in their mean pain score over the 5-day period; those who received vaporized Cannabis and oxycodone did not. These findings should be verified by further studies before recommendations favoring such an approach are warranted in general clinical practice.
Other desirable features of hemp fibers are strength and durability (particularly resistance to decay), which made hemp useful in the past for rope, nets, sail-cloth, and oakum for caulking. During the age of sailing ships, Cannabis was considered to provide the very best of canvas, and indeed this word is derived from Cannabis. Several factors combined to decrease the popularity of hemp in the late 19th and early 20th centuries. Increasing limitation of cheap labor for traditional production in Europe and the New World led to the creation of some mechanical inventions, but too late to counter growing interest in competitive crops. Development of other natural fibers as well as synthetic fibers increased competition for hemp’s uses as a textile fiber and for cordage. Hemp rag had been much used for paper, but the 19th century introduction of the chemical woodpulping process considerably lowered demand for hemp. The demise of the sail diminished the market for canvas. Increasing use of the plant for drugs gave hemp a bad image. All this led to the discontinuation of hemp cultivation in the early and middle parts of the 20th century in much of the world where cheap labor was limited. In the 19th century softer fabrics took over the clothing market, and today, hemp constitutes only about 1% of the natural fiber market. At least some production of hemp for fiber still occurs in Russia, China, the Ukraine, Poland, Hungary, the countries of the former Yugoslavia, Romania, Korea, Chile, and Peru. There has been renewed interest in England, Australia, and South Africa in cultivating fiber hemp. Italy has an outstanding reputation for high-quality hemp, but productivity has waned for the last several decades. In France, a market for high-quality paper, ironically largely cigarette paper, has developed (such paper is completely free of the intoxicating resin). Modern plant breeding in Europe has produced several dozen hemp strains, although by comparison with other fiber crops there are relatively few described varieties of hemp. Since World War II, breeding has been concerned most particularly with the development of monoecious varieties. Gehl (1995) reviewed fiber hemp development in Canada in the early 20th century, and concluded that the prospects for a traditional fiber industry were poor. However, as outlined below, there are now many non-traditional usages for hemp fiber which require consideration. Hemp long fiber is one of the strongest and most durable of natural fibers, with high tensile strength, wet strength, and other characteristics that make it technically suited for various industrial products (Karus and Leson 1996).
Marijuana is the most popular illicit drug in the world, for no reason other than the fact that it produces a psychoactive chemical called tetrahydrocannabinol. Still, recreational marijuana use, which involves pursuing the euphoric sensations produced by cannabis consumption, is steadily becoming more and more legal, both in the United States and abroad.
μ-Opioid receptor agonists (opioids) (e.g., morphine, heroin, hydrocodone, oxycodone, opium, kratom) α2δ subunit-containing voltage-dependent calcium channels blockers (gabapentinoids) (e.g., gabapentin, pregabalin, phenibut) AMPA receptor antagonists (e.g., perampanel) CB1 receptor agonists (cannabinoids) (e.g., THC, cannabis) Dopamine receptor agonists (e.g., levodopa) Dopamine releasing agents (e.g., amphetamine, methamphetamine, MDMA, mephedrone) Dopamine reuptake inhibitors (e.g., cocaine, methylphenidate) GABAA receptor positive allosteric modulators (e.g., barbiturates, benzodiazepines, carbamates, ethanol (alcohol) (alcoholic drink), inhalants, nonbenzodiazepines, quinazolinones) GHB (sodium oxybate) and analogues Glucocorticoids (corticosteroids) (e.g., dexamethasone, prednisone) nACh receptor agonists (e.g., nicotine, tobacco, arecoline, areca nut) Nitric oxide prodrugs (e.g., alkyl nitrites (poppers)) NMDA receptor antagonists (e.g., DXM, ketamine, methoxetamine, nitrous oxide, phencyclidine, inhalants) Orexin receptor antagonists (e.g., suvorexant)

Locsta....I share your pain of degenerative and bulging disk disease, along with fibromyalgia, chronic fatigue and arthritis. Absolutely no energy and chronic pain all day, every day. I'm curious as to what type and brand of the CBD oil you are taking and for how long have you been using it? I've been researching CBD oil for months and am quite confused!
A population-based case-control study of 611 lung cancer patients revealed that chronic low Cannabis exposure was not associated with an increased risk of lung cancer or other upper aerodigestive tract cancers and found no positive associations with any cancer type (oral, pharyngeal, laryngeal, lung, or esophagus) when adjusting for several confounders, including cigarette smoking.[7]
States have passed laws creating or allowing for the establishment of industrial hemp research or pilot programs. State agencies and institutions of higher education administer these programs in order to study the cultivation, processing, and economics of industrial hemp. Pilot programs may be limited to a certain period of time and may require periodic reporting from participants and state agencies. Some states establish specific regulatory agencies or committees, rules, and goals to oversee the research programs. States may also require coordination between specific colleges or universities and the programs, in other states coordination is optional. From 2015 to 2016, seven states enacted legislation to create hemp research or pilot programs, including Pennsylvania (H.B. 976) and Hawaii (S.B. 2659).
Reproduced with kind permission from the Australian Drug Foundation. References Australian Drug Foundation. Cannabis Facts. Last updated 25 Jan 2012. http://www.druginfo.adf.org.au/drug-facts/cannabis (accessed Jan 2013). Australian Drug Foundation (ADF) Vision: Healthy People, Strong Communities. Mission: Working together to prevent alcohol and other drug problems in communities.Related ArticlesCannabis psychosisUse of cannabis can cause a condition called drug-induced psychosis. Cannabis useCannabis can affect your physical and mental health with heavy cannabis use potentially causing psycCannabis: tolerance and dependenceAfter prolonged use, cannabis is addictive and people using cannabis regularly develop dependence anCannabis: withdrawal and treatmentIf a dependent person stops taking cannabis, they may experience withdrawal symptoms. Cannabis/marijuana: what are the effects?The effect of cannabis on a person depends on many factors including their size, weight and health aAdvertisement
It is clear that there is a culture of idealistic believers in hemp in North America, and that there is great determination to establish the industry. As history has demonstrated, unbridled enthusiasm for largely untested new crops touted as gold mines sometimes leads to disaster. The attempt to raise silk in the US is probably the most egregious example. In 1826 a Congressional report that recommended the preparation of a practical manual on the industry resulted in a contagious desire to plant mulberries for silk production, with the eventual collapse of the industry, the loss of fortunes, and a legacy of “Mulberry Streets” in the US (Chapter 2, Bailey 1898). In the early 1980s in Minnesota, Jerusalem artichoke was touted as a fuel, a feed, a food, and a sugar crop. Unfortunately there was no market for the new “wonder crop” and hundreds of farmers lost about $20 million (Paarlberg 1990). The level of “hype” associated with industrial hemp is far more than has been observed before for other new crops (Pinfold Consulting 1998). Probably more so than any plant in living memory, hemp attracts people to attempt its cultivation without first acquiring a realistic appreciation of the possible pitfalls. American presidents George Washington and Thomas Jefferson encouraged the cultivation of hemp, but both lost money trying to grow it. Sadly in Canada in 1999 numerous farmers contracted to grow half of Canada’s crop area for hemp for the American-based Consolidated Growers and Processors, and with the collapse of the firm were left holding very large amounts of unmarketable grain and baled hemp straw. This has represented a most untimely setback for a fledgling industry, but at least has had a sobering effect on investing in hemp. In this section we emphasize why producers should exercise caution before getting into hemp.
Several studies have demonstrated the therapeutic effects of cannabinoids for nausea and vomiting in the advanced stages of illnesses such as cancer and AIDS. Dronabinol (tetrahydrocannabinol) has been available by prescription for more than a decade in the USA. Other therapeutic uses of cannabinoids are being demonstrated by controlled studies, including treatment of asthma and glaucoma, as an antidepressant, appetite stimulant, anticonvulsant and anti-spasmodic, research in this area should continue. For example, more basic research on the central and peripheral mechanisms of the effects of cannabinoids on gastrointestinal function may improve the ability to alleviate nausea and emesis. More research is needed on the basic neuropharmacology of THC and other cannabinoids so that better therapeutic agents can be found.
Though use of marijuana among Washington state youth has remained relatively stable over the last several years (see Healthy Youth Survey), youth perception of harm from use of marijuana has been steadily decreasing (meaning: fewer adolescents believe marijuana use is harmful). Marijuana is the second most-commonly used substance among 12th graders (alcohol is the first), with 27% of high school seniors reporting current (past 30-day) use.
Jump up ^ Hayakawa K, Mishima K, Nozako M, Ogata A, Hazekawa M, Liu AX, Fujioka M, Abe K, Hasebe N, Egashira N, Iwasaki K, Fujiwara M (March 2007). "Repeated treatment with cannabidiol but not Delta9-tetrahydrocannabinol has a neuroprotective effect without the development of tolerance". Neuropharmacology. 52 (4): 1079–87. doi:10.1016/j.neuropharm.2006.11.005. PMID 17320118.
However, it is important to note that the production of derivatives or products made from whole industrial hemp plants, including sprouts, or the leaves, flowers or bracts of those plants, cannot be authorized by a licence issued under the IHR. Most activities with whole industrial hemp plants, including sprouts, or with the leaves, flowers or bracts of the plant, fall outside of the application of the IHR. These activities are controlled under the CDSA and are not authorized under the IHR."
Retting is generally done in the field (Fig. 46, 47). This typically requires weeks. The windrows should be turned once or twice. If not turned, the stems close to the ground will remain green while the top ones are retted and turn brown. When the stalks have become sufficiently retted requires experience—the fibers should have turned golden or grayish in color, and should separate easily from the interior wood. Baling can be done with any kind of baler (Fig. 48). Stalks should have less than 15% moisture when baled, and should be allowed to dry to about 10% in storage. Bales must be stored indoors. Retted stalks are loosely held together, and for highest quality fiber applications need to be decorticated, scutched, hackled, and combed to remove the remaining pieces of stalks, broken fibers, and extraneous material. The equipment for this is rare in North America, and consequently use of domestically-produced fiber for high quality textile applications is extremely limited. However, as described above relatively crude fiber preparations also have applications.
Cannabis was criminalized in various countries beginning in the 19th century. The British colonies of Mauritius banned cannabis in 1840 over concerns on its effect on Indian indentured workers;[194] the same occurred in British Singapore in 1870.[195] In the United States, the first restrictions on sale of cannabis came in 1906 (in District of Columbia).[196] It was outlawed in Jamaica (then a British colony) in 1913, in South Africa in 1922, and in the United Kingdom and New Zealand in the 1920s.[197] Canada criminalized cannabis in The Opium and Narcotic Drug Act, 1923,[198] before any reports of the use of the drug in Canada, but eventually legalized its consumption for recreational and medicinal purposes in 2018.[37]
No ongoing clinical trials of Cannabis as a treatment for cancer in humans were identified in a PubMed search. The only published trial of any cannabinoid in patients with cancer is a small pilot study of intratumoral injection of delta-9-THC in patients with recurrent glioblastoma multiforme, which demonstrated no significant clinical benefit.[19,20] In a trial (NCT02255292) conducted in Israel, oral cannabidiol (CBD) was investigated as a single salvage agent for recurrent solid tumors. The study was projected to be completed in 2015; however, no results have been published. A small exploratory phase II study (GWCA1208 Part A [NCT01812603]) was conducted in the United Kingdom that used nabiximols, a 1:1 ratio of THC:CBD in a Cannabis-based medicinal extract oromucosal spray, in conjunction with temozolomide in treating patients with recurrent glioblastoma multiforme. The study enrolled 21 patients. Final results have not been published.
The world-leading producer of hemp is China, which produces more than 70% of the world output. France ranks second with about a quarter of the world production. Smaller production occurs in the rest of Europe, Chile, and North Korea. Over 30 countries produce industrial hemp, including Australia, Austria, Canada, Chile, China, Denmark, Egypt, Finland, Great Britain, Germany, Greece,[64] Hungary, India, Italy, Japan, Korea, Netherlands, New Zealand, Poland, Portugal, Romania, Russia, Slovenia, Spain, Sweden, Switzerland, Thailand, Turkey and Ukraine.[65][66]

Cannabis contains a seemingly unique class of chemicals, the cannabinoids, of which more than 60 have been described, but only a few are psychoactive. Cannabinoids are produced in specialized epidermal glands, which differ notably in distribution on different organs of the plant (high concentrations occur on the upper surface of the young leaves and young twigs, on the tepals, stamens, and especially on the perigonal bract). Given this distribution, the glands would seem to be protective of young and reproductive above-ground tissues (the roots lack glands). Two classes of epidermal glands occur—stalked and sessile (Fig. 8), but in either case the glandular cells are covered by a sheath under which resin is accumulated, until the sheath ruptures, releasing resin on the surface. The resin is a sticky mixture of cannabinoids and a variety of terpenes. The characteristic odor of the plant is due to the abundant terpenes, which are not psychoactive. The more important cannabinoids are shown in Fig. 9. In the plant the cannabinoids exist predominantly in the form of carboxylic acids, which decarboxylate with time or when heated. Delta-9-tetrahydrocannabinol (D9-THC, or simply THC) is the predominant psychoactive component. Other THC isomers also occur, particularly D8-THC, which is also psychoactive. Technically, the euphoric psychological effects of THC are best described by the word psychotomimetic. Cannabidiol (CBD) is the chief non-psychotomimetic cannabinoid. A THC concentration in marijuana of approximately 0.9% has been suggested as a practical minimum level to achieve the (illegal) intoxicant effect, but CBD (the predominant cannabinoid of fiber and oilseed varieties) antagonizes (i.e. reduces) the effects of THC (Grotenhermen and Karus 1998). Concentrations of 0.3% to 0.9% are considered to have “only a small drug potential” (Grotenhermen and Karus 1998). Some cannabinoid races have been described, notably containing cannabichromene (particularly in high-THC forms) and cannabigerol monomethyl ether (in some Asian strains). The biosynthetic pathways of the cannabinoids are not yet satisfactorily elucidated, although the scheme shown in Fig. 10 is commonly accepted. At least in some strains, THC is derived from cannabigerol, while in others it may be derived from CBD. CBN and D8-THC are considered to be degradation products or analytical artifacts (Pate 1998a).
Topicals represent a newer emerging market in medical marijuana products geared toward health and beauty. Cannabinoids can be absorbed through the skin for certain therapeutic benefits without any psychoactivity. Additionally, the essential oils in hemp and cannabis provide many benefits for skin health. From moisturizers to shampoos and deodorants, medical cannabis products continue to diversify.

This is a huge, HUGE step for N.C. First of all farmers can FINALLY make money off land that has grown tobacco for generations. FINALLY doubter I finding out there are many uses for the plant. Perhaps one of the biggest things is the impact on the environment. Most products, if not all, are biodegradable. Also, a huge factor is that in the field of medicine. Will this lead to medical and/or recreational marijuana? Time will tell. As for me, I quit smoking it 20 years ago. I do, however, believe any and all forms of cannabis should and will be made legal. Legal, if for no other reason, so we can stop making people who smoke it into criminals, filling up our jails and prisons. This will free up police, etc.. to finding real criminals. Last, but defiantly not least, IMHO, there is the N.C. aspect. That being I thought we would never, EVER see this time in N.C. Even if it is just industrial hemp for now, it’s a start. Who knows, in the not too distant future, legislatures and law enforcement will become open minded enough to legalize all forms of cannabis, HOPEFULLY. With the youth of these times moving into the right fields, and of course us boomers weighing in, it won’t be too long. AMEN
Dehulled (i.e. hulled) hemp seed is a very recent phenomenon, first produced in quantity in Europe. Hemp seeds have been used as food since ancient times, but generally the whole seed, including the hull, was eaten. Hemp seed was a grain used in ancient China, although there has been only minor direct use of hemp seed as food by humans. In the past, hemp seed has generally been a food of the lower classes, or a famine food. Peanut-butter type preparations have been produced from hemp seed in Europe for centuries, but were rather gritty since technology for removing the hulls was rudimentary. Modern seed dehulling using mechanical separation produces a smooth, white, gritless hemp seed meal that needs no additional treatment before it is consumed. It is important to understand, therefore, that the quality of modern hemp seed for human consumption far exceeds anything produced historically. This seed meal should be distinguished from the protein-rich, oil-poor seed cake remaining after oil has been expressed, that is used for livestock feed. The seed cake is also referred to as “seed meal,” and has proven to be excellent for animals (Mustafa et al. 1999).
It's the Wild West out there. Without any federal regulatory body checking labels, consumers have very little way of knowing what they're buying when they purchase CBD oil. Bonn-Miller co-authored a study that found that 26 percent of CBD products on the market contained less CBD than their label claimed. So the amount you need for an effective dose could vary drastically, not just from product to product, but from bottle to bottle of the same product.
Unlike other Cannabis sativa varieties and hybrids, which are mostly grown for their chemically potent flowers (or 'buds'), hemp is also legally distinguished from marijuana in the US as containing less than 0.3% of the cannabinoid chemical THC — considered to be the most intoxicating, psychoactive component in cannabis plants, as well as a treatment option for certain serious illnesses.

Marijuana and hemp both come from the same species of plant, Cannabis sativa. Once it was discovered the plant’s flowers can can have psychoactive effects, cultivators began growing separate strains of the plant – one normal variety, and one whose flowers contained higher levels of the cannabinoid tetrahydrocannabinol (THC), leading to tighter regulation.
Hemp does best on a loose, well-aerated loam soil with high fertility and abundant organic matter. Well-drained clay soils can be used, but poorly-drained clay soils are very inappropriate because of their susceptibility to compaction, which is not tolerated. Young plants are sensitive to wet or flooded soils, so that hemp must have porous, friable, well-drained soils. Sandy soils will grow good hemp, provided that adequate irrigation and fertilization are provided, but doing so generally makes production uneconomical. Seedbed preparation requires considerable effort. Fall plowing is recommended, followed by careful preparation of a seedbed in the spring. The seedbed should be fine, level, and firm. Seed is best planted at 2–3 cm (twice as deep will be tolerated). Although the seedlings will germinate and survive at temperatures just above freezing, soil temperatures of 8°–10°C are preferable. Generally hemp should be planted after danger of hard freezes, and slightly before the planting date of maize. Good soil moisture is necessary for seed germination, and plenty of rainfall is needed for good growth, especially during the first 6 weeks. Seeding rate is specific to each variety, and this information should be sought from the supplier. Fiber strains are typically sown at a minimum rate of 250 seeds per m2 (approximately 45 kg/ha), and up to three times this density is sometimes recommended. In western Europe, seeding rates range from 60–70 kg/ha for fiber cultivars. Recommendations for seeding rates for grain production vary widely, from 10–45 kg/ha. Densities for seed production for tall, European, dual-purpose cultivars are less than for short oilseed cultivars. Low plant densities, as commonly found in growing tall European cultivars for seed, may not suppress weed growth adequately, and under these circumstances resort to herbicides may pose a problem for those wishing to grow hempseed organically. Hemp requires about the same fertility as a high-yielding crop of wheat. Industrial hemp grows well in areas that corn produces high yields. Growing hemp may require addition of up to 110 kg/ha of nitrogen, and 40–90 kg/ha of potash. Hemp particularly requires good nitrogen fertilization, more so for seed production than fiber. Adding nitrogen when it is not necessary is deleterious to fiber production, so that knowledge of the fertility of soils being used is very important. Organic matter is preferably over 3.5%, phosphorus should be medium to high (>40 ppm), potassium should be medium to high (>250 ppm), sulfur good (>5,000 ppm), and calcium not in excess (<6,000 ppm).

Right now, there’s a good chance that you don’t really know what you’re getting from any source. Testing and labeling rules vary by state, but many states that allow legal cannabis also require some kind of testing to verify that the THC and CBD levels listed on the label are accurate. However, this testing is controversial, and results can vary widely between labs, Jikomes said. A study published in March found measurable variations in test results, with some labs consistently reporting higher or lower levels of cannabinoids than others. There are no guarantees that the label accurately reflects what’s in the product. For a 2015 study published in JAMA, researchers tested 75 products purchased in San Francisco, Los Angeles and Seattle and found that only 17 percent were accurately labeled. More than half of the products contained significantly lower levels of cannabinoids than the label promised, and some of them contained only negligible amounts of the compounds. “We need to come up with ways to confidently verify the composition of cannabis products and make this information available to consumers,” Jikomes said.
The CBD utilized in our tinctures is extracted from industrial hemp cultivated in the United States. To further ensure quality and purity, our industrial hemp goes through a supercritical CO2 extraction process to obtain the best possible CBD solution. This solution is then formulated by our board-certified pharmacists into finished products and sent out for third-party testing. Our CBD oil is made with high-quality CBD extracted from organic hemp that is abundant in naturally produced terpenes, oils, vitamins, omega fatty acids, and other components.
This law provides a framework for commercial industrial hemp production in Montana following approval by the federal government. Provisions added to the 2014 Farm Bill (Section 7606) defined industrial hemp under federal law and recognized state agricultural departments' authority to develop research pilot programs to study the growth, cultivation, and/or marketing of industrial hemp.

Cannabis smoke contains thousands of organic and inorganic chemical compounds. This tar is chemically similar to that found in tobacco smoke,[88] and over fifty known carcinogens have been identified in cannabis smoke,[89] including; nitrosamines, reactive aldehydes, and polycylic hydrocarbons, including benz[a]pyrene.[90] Cannabis smoke is also inhaled more deeply than is tobacco smoke.[91] As of 2015, there is no consensus regarding whether cannabis smoking is associated with an increased risk of cancer.[92] Light and moderate use of cannabis is not believed to increase risk of lung or upper airway cancer. Evidence for causing these cancers is mixed concerning heavy, long-term use. In general there are far lower risks of pulmonary complications for regular cannabis smokers when compared with those of tobacco.[93] A 2015 review found an association between cannabis use and the development of testicular germ cell tumors (TGCTs), particularly non-seminoma TGCTs.[94] A 2015 analysis of six studies found little evidence that long-term or regular cannabis smoking was associated with lung cancer risk, though it could not rule out whether an association with heavy smoking exists.[95] Another 2015 meta-analysis found no association between lifetime cannabis use and risk of head or neck cancer.[96] Combustion products are not present when using a vaporizer, consuming THC in pill form, or consuming cannabis foods.[97]
"The dairy industry is really in trouble, and so, one of the things that I find really important is finding value-added products," Gilbert Jenkins said. "I am not an et. al scientist, I am not a dairy farmer, but I know about the crops that they grow. Having an opportunity to grow a crop -- even on just a portion of the acres -- that could bring in new income."
The DEA isn’t the only government agency scrutinizing CBD vendors. To fend off the FDA, hemp oil companies contend their wares are not drugs but “dietary supplements.” Despite the suggestive “meds” in the company’s name, HempMedsPx is careful to note on its web site, “Although some of our founders are medical professionals, we cannot make medical claims about the benefits of our products.” Others are not quite so nuanced in their marketing. The internet is flooded with CBD products claiming to treat everything from seizures to arthritis to skin conditions and other maladies.
Jump up ^ Hayakawa K, Mishima K, Nozako M, Ogata A, Hazekawa M, Liu AX, Fujioka M, Abe K, Hasebe N, Egashira N, Iwasaki K, Fujiwara M (March 2007). "Repeated treatment with cannabidiol but not Delta9-tetrahydrocannabinol has a neuroprotective effect without the development of tolerance". Neuropharmacology. 52 (4): 1079–87. doi:10.1016/j.neuropharm.2006.11.005. PMID 17320118.
Cannabis, also known as marijuana among other names,[n 1] is a psychoactive drug from the Cannabis plant used for medical or recreational purposes.[16][17][18] The main psychoactive part of cannabis is tetrahydrocannabinol (THC), one of 483 known compounds in the plant,[19] including at least 65 other cannabinoids.[20] Cannabis can be used by smoking, vaporizing, within food, or as an extract.[21]
Cannabis, (genus Cannabis), plant belonging to the family Cannabaceae of the nettle order (Urticales). By some classifications, the genus Cannabis comprises a single species, hemp (Cannabis sativa), a stout, aromatic, erect annual herb that originated in Central Asia and is now cultivated worldwide, including in Europe, southern Asia, the Middle East, India, Africa, and the Americas. A tall canelike variety is raised for the production of hemp fibre, while the female plant of a short branchier variety is prized as the more abundant source of the psychoactive substance tetrahydrocannabinol (THC), the active ingredient of marijuana.

Still, as the saying goes, absence of evidence isn’t necessarily evidence of absence, and there’s a reason we don’t have a ton of solid research on CBDs yet — “to study it, we need a good source, ” said Ziva Cooper, who is an associate professor at Columbia University and was on the National Academies committee. CBD is hard to get because it’s still technically a Schedule I drug, which limits its availability, Cooper said.
For a fiber crop, hemp is cut in the early flowering stage or while pollen is being shed, well before seeds are set. Tall European cultivars (greater than 2 m) have mostly been grown in Canada to date, and most of these are photoperiodically adapted to mature late in the season (often too late). Small crops have been harvested with sickle-bar mowers and hay swathers, but plugging of equipment is a constant problem. Hemp fibers tend to wrap around combine belts, bearings, indeed any moving part, and have resulted in large costs of combine repairs (estimated at $10.00/ha). Slower operation of conventional combines has been recommended (0.6–2 ha/hour). Large crops may require European specialized equipment, but experience in North America with crops grown mainly for fiber is limited. The Dutch company HempFlax has developed or adapted several kinds of specialized harvesting equipment (Fig. 44, 45).
Based on studies of sex reversal in hemp, it was first reported by K. Hirata in 1924 that an XY sex-determination system is present.[25] At the time, the XY system was the only known system of sex determination. The X:A system was first described in Drosophila spp in 1925.[28] Soon thereafter, Schaffner disputed Hirata's interpretation,[29] and published results from his own studies of sex reversal in hemp, concluding that an X:A system was in use and that furthermore sex was strongly influenced by environmental conditions.[26]
Of the 20 known amino acids, hemp supplies them all, including the essential ones the body can’t produce, known as EAAs. About 65 percent of the protein in hemp seeds is edestin, a globulin protein that aids in digestion, similar to the globulin found in human blood plasma, and hemp seeds are the only place they’re found. The other third is made up of the protein albumin.

Australia's National Cannabis Prevention and Information Centre (NCPIC) states that the buds (flowers) of the female cannabis plant contain the highest concentration of THC, followed by the leaves. The stalks and seeds have "much lower THC levels".[152] The UN states that leaves can contain ten times less THC than the buds, and the stalks one hundred times less THC.[149]

One of the reasons hemp fiber has been valued is because of its length. The primary bast fibers in the bark are 5–40 mm long, and are amalgamated in fiber bundles which can be 1–5 m long (secondary bast fibers are about 2 mm long). The woody core fibers are short—about 0.55 mm—and like hardwood fibers are cemented together with considerable lignin. The core fibers are generally considered too short for high grade paper applications (a length of 3 mm is considered ideal), and too much lignin is present. While the long bast fibers have been used to make paper almost for 2 millennia, the woody core fibers have rarely been so used. Nevertheless it has been suggested that the core fibers could be used for paper making, providing appropriate technology was developed (de Groot et al. 1998). In any event, the core fibers, have found a variety of uses, as detailed below. The long, lignin-poor bast fibers also have considerable potential to be used in many non-paper, non-textile applications, as noted below.
Despite the fact that marijuana remains illegal at the federal level, companies like HempMedsPx claim their CBD products are legal in all 50 states. According to a legal opinion written by Medical Marijuana, Inc.’s attorney and submitted to the New Republic, “HempMedsPx’s CBD hemp oil, containing naturally occurring CBD and miniscule amount of THC, is exempted from the definition of marijuana, is not a controlled substance, complies with the Controlled Substances Act, and is legal on the federal level.” The opinion is based in large part on a 2004 court ruling which allowed the importation of hemp food products derived from the mature stalks of cannabis plants.
Cannabis smoke contains thousands of organic and inorganic chemical compounds. This tar is chemically similar to that found in tobacco smoke,[88] and over fifty known carcinogens have been identified in cannabis smoke,[89] including; nitrosamines, reactive aldehydes, and polycylic hydrocarbons, including benz[a]pyrene.[90] Cannabis smoke is also inhaled more deeply than is tobacco smoke.[91] As of 2015, there is no consensus regarding whether cannabis smoking is associated with an increased risk of cancer.[92] Light and moderate use of cannabis is not believed to increase risk of lung or upper airway cancer. Evidence for causing these cancers is mixed concerning heavy, long-term use. In general there are far lower risks of pulmonary complications for regular cannabis smokers when compared with those of tobacco.[93] A 2015 review found an association between cannabis use and the development of testicular germ cell tumors (TGCTs), particularly non-seminoma TGCTs.[94] A 2015 analysis of six studies found little evidence that long-term or regular cannabis smoking was associated with lung cancer risk, though it could not rule out whether an association with heavy smoking exists.[95] Another 2015 meta-analysis found no association between lifetime cannabis use and risk of head or neck cancer.[96] Combustion products are not present when using a vaporizer, consuming THC in pill form, or consuming cannabis foods.[97]
Three controlled trials demonstrated that oral THC has variable effects on appetite stimulation and weight loss in patients with advanced malignancies and human immunodeficiency virus (HIV) infection.[32] One study evaluated the efficacy of dronabinol alone or with megestrol acetate compared with that of megestrol acetate alone for managing cancer-associated anorexia.[40] In this randomized, double-blind study of 469 adults with advanced cancer and weight loss, patients received 2.5 mg of oral THC twice daily, 800 mg of oral megestrol daily, or both. Appetite increased by 75% in the megestrol group and weight increased by 11%, compared with a 49% increase in appetite and a 3% increase in weight in the oral THC group after 8 to 11 weeks of treatment. These two differences were statistically significant. Furthermore, the combined therapy did not offer additional benefits beyond those provided by megestrol acetate alone. The authors concluded that dronabinol did little to promote appetite or weight gain in advanced cancer patients compared with megestrol acetate. However, a smaller, placebo-controlled trial of dronabinol in cancer patients demonstrated improved and enhanced chemosensory perception in the cannabinoid group—food tasted better, appetite increased, and the proportion of calories consumed as protein was greater than in the placebo recipients.[41]

Jump up ^ "Minister of Justice and Constitutional Development and Others v Prince (Clarke, Stobbs and Thorpe Intervening) (Doctors of Life International Inc as Amicus Curiae); National Director of Public Prosecutions and Others v Rubin; National Director of Public Prosecutions and Others v Acton and Others". The Constitutional Court of South Africa.


Many animal studies have previously demonstrated that delta-9-THC and other cannabinoids have a stimulatory effect on appetite and increase food intake. It is believed that the endogenous cannabinoid system may serve as a regulator of feeding behavior. The endogenous cannabinoid anandamide potently enhances appetite in mice.[39] Moreover, CB1 receptors in the hypothalamus may be involved in the motivational or reward aspects of eating.[40]
It sounds like the title of a children’s book, but like so much else that you learned in kindergarten, it’s true. Everyone’s body is different – but everyone’s endocannabinoid system is really unique. For reasons we don’t fully understand, receptors in the endocannabinoid system don’t respond predictably to cannabinoids from person to person. This lack of a predictable response makes standard dosing tricky.
Concrete-like blocks made with hemp and lime have been used as an insulating material for construction. Such blocks are not strong enough to be used for structural elements; they must be supported by a brick, wood, or steel frame.[25] However, hemp fibres are extremely strong and durable, and have been shown to be usable as a replacement for wood for many jobs, including creating very durable and breathable homes. The most common use of hemp lime in building is by casting the hemp and lime mix while wet around a timber frame with temporary shuttering, and tamping the mix to form a firm mass; after the removal of the temporary shuttering, the solidified hemp mix is then ready to be plastered with a lime plaster.[26]
×