"The dairy industry is really in trouble, and so, one of the things that I find really important is finding value-added products," Gilbert Jenkins said. "I am not an et. al scientist, I am not a dairy farmer, but I know about the crops that they grow. Having an opportunity to grow a crop -- even on just a portion of the acres -- that could bring in new income."
Hemp is a multi-purpose agricultural crop delivering seeds, fibers and bio-active chemicals for a number of uses and markets. Industrial hemp is defined in federal and Montana statute as Cannabis sativa L. that contains no more than 0.3% delta-9 tetrahydrocannabinol (THC). Industrial hemp is authorized as an alternative agricultural crop by the Montana Legislature, Section 80-18-101 through 80-18-111 of Montana Code Annotated.
Hemp paper is useful for specialty applications such as currency and cigarette papers where strength is needed. The bast fiber is of greatest interest to the pulp and paper industry because of its superior strength properties compared to wood. However, the short, bulky fibers found in the inner part of the plant (hurds) can also be used to make cheaper grades of paper, apparently without greatly affecting quality of the printing surface. Hemp is not competitive for newsprint, books, writing papers, and general paper (grocery bags, coffee cups, napkins), although there is a specialty or novelty market for those specifically wishing to support the hemp industry by purchasing hemp writing or printing paper despite the premium price (Fig. 17).
All this means that scientists can still only obtain marijuana-derived CBD from farms licensed by the National Institute on Drug Abuse (which until this year meant only one farm owned by the University of Mississippi). As for whether you should have a preference for CBD that comes from hemp, marijuana, or a pure synthetically produced version, there are some theories that THC—and even the smell and taste of cannabis—might make CBD more effective, but Bonn-Miller says these ideas have yet to be proven.
Jump up ^ Datwyler, SL; Weiblen, GD (2006). "Genetic Variation in Hemp and marijuana (Cannabis sativa L.) sativa plants are taller and less dense. Indica plants are shorter but a lot more dense than sativas. According to Amplified Fragment Length Polymorphisms". Journal of Forensic Sciences. 51 (2): 371–375. doi:10.1111/j.1556-4029.2006.00061.x. PMID 16566773.
"Cannabinoids have been found to have antioxidant properties, unrelated to NMDA receptor antagonism. This new found property makes cannabinoids useful in the treatment and prophylaxis of wide variety of oxidation associated diseases, such as ischemic, age-related, inflammatory and autoimmune diseases. The cannabinoids are found to have particular application as neuroprotectants, for example in limiting neurological damage following ischemic insults, such as stroke and trauma, or in the treatment of neurodegenerative diseases, such as Alzheimer's disease, Parkinson's disease and HIV dementia.
Cannabis plants can be male, female, or hermaphrodite. The dried marijuana flowers that humans consume, however, come from the female plant. That’s because female plants produce large resin-secreting flowers that are rich in cannabinoids and free of seeds. Hence, female plants are the ones growers prefer, though of course, male marijuana plants are a requirement for pollination.
Cannabinoids are a class of compounds that interact with receptors throughout your body. CBD is just one of dozens of cannabinoids found in cannabis, including tetrahydrocannabinol (THC), which is the one responsible for marijuana’s famous high. Medical cannabis is technically any cannabis product used for medicinal purposes, and these can contain THC or CBD or both, said Nick Jikomes, a neuroscientist at Leafly, a website that provides information about legal cannabis. “A common mistake people make is to think that CBD is ‘the medical cannabinoid’ and THC is ‘the recreational cannabinoid.’” That’s inaccurate, he said, because THC is a potent anti-inflammatory and can be helpful for pain.
Folks. This article has nothing whatsoever to do wiht legalization of marijuana. Why do you keep commenting on legalizing pot, medical or otherwise? This article is about hemp. TOTALLY different. As an agricultural product it is very adaptable, forgiving and has a multitude of uses. Please stay on topic and help to promote the valuable product of HEMP. South Carolina has made it legal to grow and the rest of the country would benefit from following suit. Again, this has absolutely nothing to do with Pot!!!!!
Kent, My mother has suffered from severe migraines since she was a child. Six weeks ago, she received the hemp oil tincture (I do not know what dosage). She does not take it daily. She rubs a drop or two on her temples at the start of a migraine. The drops worked more effectively for her than her medication did, and now that is all she uses. Hope this helps.
In November 2015, Uttarakhand became the first state of India to legalize the cultivation of hemp for industrial purposes. Usage within the Hindu and Buddhist cultures of the Indian subcontinent is common, with many street vendors in India openly selling products infused with cannabis, and traditional medical practitioners in Sri Lanka selling products infused with cannabis for recreational purposes and well as for religious celebrations. It was criminalized in the Indian subcontinent by the Dutch and then the British. India and Sri Lanka have allowed cannabis to be taken in the context of traditional culture for recreational/celebratory purposes and also for medicinal purposes.
Some individuals have been found to have mutations on the CNR1 gene, which is responsible for coding the CB1 receptor (a type of receptor in cells throughout your body that interacts with cannabinoids). Issues with the CNR1 gene can ultimately result in a poorly functioning endocannabinoid system, which is an important variable when figuring out how to use CBD oil.
Another concern is about medications with which CBD might interact. This won’t be an issue with most drugs, says Sunil Kumar Aggarwal, M.D., Ph.D., a palliative medicine physician and scientist who studies cannabis and integrates it into his Seattle medical practice. The exceptions are blood thinners, IV antibiotics, and other drugs whose exact dosing is crucial and must be monitored closely, he says. (Of course, if you have a health problem, talk to your doctor before using CBD, and never take it instead of seeing your physician for a serious condition.)
The pulp and paper industry based on wood has considered the use of hemp for pulp, but only on an experimental basis. Hemp’s long fibers could make paper more recyclable. Since virgin pulp is required for added strength in the recycling of paper, hemp pulp would allow for at least twice as many cycles as wood pulp. However, various analyses have concluded that the use of hemp for conventional paper pulp is not profitable (Fertig 1996).
“Geotextiles” or “agricultural textiles” include (1) ground-retaining, biodegradable matting designed to prevent soil erosion, especially to stabilize new plantings while they develop root systems along steep highway banks to prevent soil slippage (Fig. 32); and (2) ground-covers designed to reduce weeds in planting beds (in the manner of plastic mulch). At present the main materials used are polymeric (polythene, spun-blown polypropylene) and some glass fiber and natural fibers. Both woven and non-woven fibers can be applied to geotextiles; woven and knitted materials are stronger and the open structure may be advantageous (e.g. in allowing plants to grow through), but non-wovens are cheaper and better at suppressing weeds. Flax and hemp fibers exposed to water and soil have been claimed to disintegrate rapidly over the course of a few months, which would make them unacceptable for products that need to have long-term stability when exposed to water and oil. Coco (coir) fiber has been said to be much more suitable, due to higher lignin content (40%–50%, compared to 2%–5% in bast fibers); these are much cheaper than flax and hemp fibers (Karus et al. 2000). However, this analysis does not do justice to the developing hemp geotextile market. Production of hemp erosion control mats is continuing in both Europe and Canada. Given the reputation for rot resistance of hemp canvas and rope, it seems probable that ground matting is a legitimate use. Moreover, the ability to last outdoors for many years is frequently undesirable in geotextiles. For example, the widespread current use of plastic netting to reinforce grass sod is quite objectionable, the plastic persisting for many years and interfering with lawn care. Related to geotextile applications is the possibility of using hemp fiber as a planting substrate (biodegradable pots and blocks for plants), and as biodegradable twine to replace plastic ties used to attach plants to supporting poles. Still another consideration is the “green ideal” of producing locally for local needs; by this credo, hemp is preferable in temperate regions to the use of tropical fibers, which need to be imported.
The downsides of graphene are its dwindling sources and costly process to mine and import from rural areas in China and India. Hemp, however, can be grown in almost any terrain or country, and produces hemp bast, the key material used to replace graphene, as a waste byproduct of hemp processing. According to Mitlin’s research, hemp processing is 1,000 times cheaper than graphene processing.
This PDQ cancer information summary for health professionals provides comprehensive, peer-reviewed, evidence-based information about the use of Cannabis and cannabinoids in the treatment of people with cancer. It is intended as a resource to inform and assist clinicians who care for cancer patients. It does not provide formal guidelines or recommendations for making health care decisions.
Side effects of CBD include sleepiness, decreased appetite, diarrhea, fatigue, malaise, weakness, sleeping problems, and others. It does not have intoxicating effects like those caused by THC, and may have an opposing effect on disordered thinking and anxiety produced by THC. CBD has been found to interact with a variety of different biological targets, including cannabinoid receptors and other neurotransmitter receptors. The mechanism of action of CBD in terms of its psychoactive and therapeutic effects is not fully clear.
The 113th Congress made significant changes to U.S. policies regarding industrial hemp during the omnibus farm bill debate. The Agricultural Act of 2014 (P.L. 113-79) provided that certain research institutions and state departments of agriculture may grow industrial hemp, as part of an agricultural pilot program, if allowed under state laws where the institution or state department of agriculture is located. The FY2015 appropriations (P.L. 113-235) further blocked federal law enforcement authorities from interfering with state agencies, growers, and agricultural research. (From "Hemp as an agricultural commodity," Congressional Research Service)
There are many varieties of cannabis infusions owing to the variety of non-volatile solvents used. The plant material is mixed with the solvent and then pressed and filtered to express the oils of the plant into the solvent. Examples of solvents used in this process are cocoa butter, dairy butter, cooking oil, glycerine, and skin moisturizers. Depending on the solvent, these may be used in cannabis foods or applied topically.
The “re-“growth of industrial hemp in the United States is heavily regulated, although the neighbouring nation of Canada successfully grows hemp commercially. Since becoming legal to grow again in Canada, the crop has taken off and has become a booming multi-million dollar export. Hemp building materials are another growing segment of the hemp industry. Canada is now a leader in the global hemp food/health marketplace. Canadian hemp products can be found in many hemp markets now in the United States and the world over.
For patients suffering from seizures, the legalization of cannabis would be a decisive turning point. Epilepsy makes you desperate. Seizures are painful, sometimes debilitating. And then there are the aftershocks: broken teeth, bruises and cuts, lost time, humiliation. People with epilepsy are often depressed, and have more than double the suicide rate of the population at large. Epilepsy is also associated with a syndrome known as Sudden Unexpected Death in Epilepsy, wherein a previously healthy person with epilepsy simply dies without warning or explanation. Grinding on without relief isn’t an option, but getting help is enormously expensive. Research conducted by Charles Begley, a professor of public health at the University of Texas, found that epilepsy treatment costs between $8,500 and $11,000 per year. Real Scientific Hemp Oil is no less expensive than its pharmaceutical counterparts, with no assistance from insurance. A single three-gram vial costs $149, while a six-pack of 10-gram tubes can cost $1,999 (or $1,599 on sale). HempMedsPx suggests a “serving size” of 0.5 ml twice daily. Only when these drugs are recognized as such will insurance pick up the tab.
Cannabis is an annual, dioecious, flowering herb. The leaves are palmately compound or digitate, with serrate leaflets. The first pair of leaves usually have a single leaflet, the number gradually increasing up to a maximum of about thirteen leaflets per leaf (usually seven or nine), depending on variety and growing conditions. At the top of a flowering plant, this number again diminishes to a single leaflet per leaf. The lower leaf pairs usually occur in an opposite leaf arrangement and the upper leaf pairs in an alternate arrangement on the main stem of a mature plant.
Yet when one looks at the industry more broadly, there is cause for concern. In February, as part of an investigation into the marketing claims of six hemp oil companies, the FDA analyzed 18 CBD products. What it found was disturbing: Many of these supposed CBD products were entirely lacking in CBD. Of the products tested, six contained no cannabinoids whatsoever. Another 11 contained less than 1 percent CBD. The product that tested highest in CBD, at 2.6 percent, was a capsule for dogs. In states that have legalized CBD, regulations can require CBD products to contain at least 5 percent CBD, more often 10 or 15 percent.
My Wife had Polio at age 5 and the lingering damage to the L leg and muscle drove her crazy. At age 21 she was using heavy doses of muscle relaxers and pain meds. Needed to bomb herself at night to get some sleep. A Post polio group in West Palm Beach told her about Marijuana and she got some from the Jamaican health aide that was her constant helper. After 5 months she quit all meds. All of them. Slowly came out of the drugged state the meds had caused from 15 years of use. We separated good friends and I know she has gone back to school and getting a degree. All from the help of a plant from Jamaica. I never understood the statement this plant has no viable medical value. Something smells in the politics of this prohibition. Shame.
The main difference between the two is in its chemical composition, specifically in tetrahydrocannabinol (THC). THC is the chemical responsible marijuana’s psychological effects.An average batch of marijuana contains anywhere from 5-20% THC content. Some premium marijuana can have up to 25-30% THC. Hemp, on the other hand, has a max THC level of 0.3%, essentially making it impossible to feel any psychoactive effect or get a “high”. This threshold is heavily regulated in other countries that have legalized hemp.Hemp also has high cannabidiol (CBD) content that acts as THC’s antagonist, essentially making the minimal amount of THC useless.
CBD E-Liquid/Vape Cartridges: Vaping is excellent for people looking for an immediate response, as inhalation is the fastest way to deliver CBDs to your brain and body. To use vape simply exhale gently the air from your lungs then inhale through the mouthpiece slowly for 3 seconds. Then fill your lungs the rest of the way with additional breath and hold for a few seconds, exhaling when ready. There are pre-filled, cost-effective vape pens and cartridges available as well as more expensive vaporizers that you can refill with CBD-infused e-liquid.
At least 38 states considered legislation related to industrial hemp in 2018. These bills ranged from clarifying existing laws to establishing new licensing requirements and programs. At least 5 states – Alaska, Arizona, Kansas, Missouri and Oklahoma – enacted legislation in 2018 establishing hemp research and industrial hemp pilot programs. Georgia adopted a resolution to create the House Study Committee on Industrial Hemp Production. States, already allowing for industrial hemp programs, continued to consider policies related to licensure, funding, seed certification, and other issues. For example, Tennessee amended its Commercial Feed Law to include hemp.
The effects of delta-9-THC and a synthetic agonist of the CB2 receptor were investigated in HCC. Both agents reduced the viability of HCC cells in vitro and demonstrated antitumor effects in HCC subcutaneous xenografts in nude mice. The investigations documented that the anti-HCC effects are mediated by way of the CB2 receptor. Similar to findings in glioma cells, the cannabinoids were shown to trigger cell death through stimulation of an endoplasmic reticulum stress pathway that activates autophagy and promotes apoptosis. Other investigations have confirmed that CB1 and CB2 receptors may be potential targets in non-small cell lung carcinoma  and breast cancer.
We gave the highest points to companies that use a CBD distillate for their tinctures. The process of distillation creates an extract that is pure on a molecular level. There are people who think distillate is too pure, and that a full spectrum decarb produces a more effective tincture. But in light of the inconclusive evidence, we prefer a distillate. The process allows for a high degree of control as to the finished product. It’s also odorless and tasteless, so those tinctures tend to taste better.
Hi, Congrats on finishing chemo & radiation that’s awesome!! I wish you the best of luck!! I was actually wanting to know about dosage for cancer as well..My parents both have recently been diagnosed with cancer 4 months apart and are currently going thru chemo together. I have tried looking for the dosage info but can never find what i’m looking for..I want to try to help lesson the chemo side effects and hopefully kill some of the cancer cells. Can someone please help us?Thank You Christy
Pain management improves a patient’s quality of life throughout all stages of cancer. Through the study of cannabinoid receptors, endocannabinoids, and synthetic agonists and antagonists, the mechanisms of cannabinoid-induced analgesia have been analyzed.[Level of evidence:1iC] The CB1 receptor is found in the central nervous system (CNS) and in peripheral nerve terminals. CB2 receptors are located mainly in peripheral tissue and are expressed in only low amounts in the CNS. Whereas only CB1 agonists exert analgesic activity in the CNS, both CB1 and CB2 agonists have analgesic activity in peripheral tissue.[48,49]
^ Jump up to: a b Deitch, Robert (2003). Hemp: American History Revisited: The Plant with a Divided History. Algora Publishing. pp. 4–26. ISBN 9780875862262. Retrieved 2013-11-16. Cannabis is ... a plant that played an important role in colonial America's prosperous economy and remained a valuable commercial commodity up until the Second World War.
A USDA analysis of hemp, “Industrial hemp in the United States: Status and market potential,” was issued in 2000, and is available at www.ers.usda.gov/publications/ages001e/index.htm. This is anonymously-authored, therefore presumably represents a corporate or “official” evaluation. The conclusion was that “US markets for hemp fiber (specialty textiles, paper, and composites) and seed (in food or crushed for oil) are, and will likely remain, small, thin markets. Uncertainty about longrun demand for hemp products and the potential for oversupply discounts the prospects for hemp as an economically viable alternative crop for American farmers.” Noting the oversupply of hempseeds associated with Canada’s 12,000 ha in 1999, the report concluded that the long term demand for hemp products is uncertain, and predicts that the hemp market in the US will likely remain small and limited. With respect to textiles, the report noted the lack of a thriving textile flax (linen) US industry (despite lack of legal barriers), so that it would seem unlikely that hemp could achieve a better market status. With respect to hemp oil, the report noted that hemp oil in food markets is limited by its short shelf life, the fact that it can not be used for frying, and the lack of US Food and Drug Administration approval as GRAS (“generally recognized as safe”). Moreover, summarizing four state analyses of hemp production (McNulty 1995, Ehrensing 1998, Kraenzel et al. 1998, Thompson et al. 1998), profitability seemed doubtful.
Indeed, hemp oil products have grown out of a market largely devoid of regulations or safety protocols. The state of the CBD industry harks back to the age of elixirs and potions hawked from covered wagons to the awed denizens of pioneer towns. There are no industrywide standards in place to ensure that CBD oils are consistently formulated batch-to-batch. There is no regulatory body screening products for pesticides, heavy metals, solvent residues, and other dangerous contaminants. The laboratories that companies contract to test their CBD products are themselves neither standardized nor consistently regulated. No medical research exists to recommend how much CBD a patient should take, nor is there detailed, reliable documentation of how CBD interacts with most epilepsy medications.
I suffer fr migraines. Currently having Botox injections every three months for the last three years. This has helped went fr 24 to 30 migraines a month to 6 to 8 , now I'm back up to 14 to 20 a month. My doctor thought CBD oil might help. I have also started having anxiety attacks for a year now. I'm really confused with the dosages. Any thoughts would b helpful
Cannabis use for medicinal purposes dates back at least 3,000 years.[1-5] It was introduced into Western medicine in 1839 by W.B. O’Shaughnessy, a surgeon who learned of its medicinal properties while working in India for the British East India Company. Its use was promoted for reported analgesic, sedative, anti-inflammatory, antispasmodic, and anticonvulsant effects.
There is a general inverse relationship in the resin of Cannabis between the amounts of THC present and the amount of the other principal cannabinoid, CBD. Whereas most drug strains contain primarily THC and little or no CBD, fiber and oilseed strains primarily contain CBD and very little THC. CBD can be converted to THC by acid catalyzed cyclization, and so could serve as a starting material for manufacturing THC. In theory, therefore, low-THC cultivars do not completely solve the problem of drug abuse potential. In practice, however, the illicit drug trade has access to easier methods of synthesizing THC or its analogues than by first extracting CBD from non-drug hemp strains.
Fig. 6. ‘Finola,’ the first cultivar of Cannabis sativa bred exclusively for grain. (Courtesy of the breeder, J.C. Callaway, Univ. Kuopio, Finland.) Fig. 7. ‘Anka,’ the first registered North American bred cultivar of Cannabis sativa. This variety is best suited for grain production. (Courtesy of the breeder, P. Dragla, and of the Industrial Hemp Seed Development Company, Chatham, Ontario.)
Separate levels of evidence scores are assigned to qualifying human studies on the basis of statistical strength of the study design and scientific strength of the treatment outcomes (i.e., endpoints) measured. The resulting two scores are then combined to produce an overall score. An overall level of evidence score cannot be assigned to cannabinoids because there has been insufficient clinical research. For an explanation of possible scores and additional information about levels of evidence analysis of CAM treatments for people with cancer, refer to Levels of Evidence for Human Studies of Integrative, Alternative, and Complementary Therapies.
Fibres are obtained by subjecting the stalks to a series of operations—including retting, drying, and crushing—and a shaking process that completes separation from the woody portion, releasing the long, fairly straight fibre, or line. The fibre strands, usually over 1.8 metres (5.8 feet) long, are made of individual cylindrical cells with an irregular surface. The fibre, longer and less flexible than flax, is usually yellowish, greenish, or a dark brown or gray and, because it is not easily bleached to sufficiently light shades, is rarely dyed. It is strong and durable and is used for cordage—e.g., twine, yarn, rope, cable, and string—and for artificial sponges and such coarse fabrics as sacking (burlap) and canvas. In Italy some hemp receives special processing, producing whitish colour and attractive lustre, and is used to make fabric similar to linen.
Traditionally, hemp fiber has been a very coarse fiber when raw, which made it well suited to rope but less than ideal for clothing designed to be worn against delicate human skin. Advances in breeding of the plants and treatment/processing of the fibers have resulted in a much finer, softer hemp fiber, which is ideal for weaving into hemp clothing, fabrics and rope. Watch the video on Hemp for victory to learn more about the importance of hemp during war times.
From 1982 to 2002 the EU provided the equivalent of about 50 million dollars to develop new flax and hemp harvesting and fiber processing technologies (Karus et al. 2000). Because of the similarities of flax and hemp, the technologies developed for one usually are adaptable to the other. In addition, various European nations and private firms contributed to the development of hemp technologies. Accordingly, Europe is far more advanced in hemp development with respect to all fiber-based applications than other parts of the world. The EU currently dedicates about 30,000 ha to hemp production. France is the leading country in hemp cultivation in the EU, and 95% of the non-seed production is used for “specialty pulp” as described below. Harvesting and processing machinery for fiber hemp is highly advanced in Europe, and some has been imported into Canada. However, there is insufficient fiber processing capacity to handle hemp produced in Canada.
Reference citations in some PDQ cancer information summaries may include links to external websites that are operated by individuals or organizations for the purpose of marketing or advocating the use of specific treatments or products. These reference citations are included for informational purposes only. Their inclusion should not be viewed as an endorsement of the content of the websites, or of any treatment or product, by the PDQ Integrative, Alternative, and Complementary Therapies Editorial Board or the National Cancer Institute.
According to the United Nations Office on Drugs and Crime (UNODC), "the amount of THC present in a cannabis sample is generally used as a measure of cannabis potency." The three main forms of cannabis products are the flower, resin (hashish), and oil (hash oil). The UNODC states that cannabis often contains 5% THC content, resin "can contain up to 20% THC content", and that "Cannabis oil may contain more than 60% THC content."
The leaves have a peculiar and diagnostic venation pattern that enables persons poorly familiar with the plant to distinguish a cannabis leaf from unrelated species that have confusingly similar leaves (see illustration). As is common in serrated leaves, each serration has a central vein extending to its tip. However, the serration vein originates from lower down the central vein of the leaflet, typically opposite to the position of, not the first notch down, but the next notch. This means that on its way from the midrib of the leaflet to the point of the serration, the vein serving the tip of the serration passes close by the intervening notch. Sometimes the vein will actually pass tangent to the notch, but often it will pass by at a small distance, and when that happens a spur vein (occasionally a pair of such spur veins) branches off and joins the leaf margin at the deepest point of the notch. This venation pattern varies slightly among varieties, but in general it enables one to tell Cannabis leaves from superficially similar leaves without difficulty and without special equipment. Tiny samples of Cannabis plants also can be identified with precision by microscopic examination of leaf cells and similar features, but that requires special expertise and equipment.
Hemp seeds can be eaten raw, ground into hemp meal, sprouted or made into dried sprout powder. The leaves of the hemp plant can be consumed raw in salads. Hemp seeds can also be made into a liquid and used for baking or for beverages such as hemp milk, hemp juice, and tea. Hemp oil is cold-pressed from the seed and is high in unsaturated fatty acids.