In the United States, cannabis is overall the number four value crop, and is number one or two in many states including California, New York and Florida, averaging $3,000 per pound ($6,600/kg). Some believe it generates an estimated $36 billion market. Some have argued that this estimate is methodologically flawed, and makes unrealistic assumptions about the level of marijuana consumption. Other estimates claiming to correct for this flaw claim that the market is between $2.1-$4.3 billion. The United Nations Office on Drugs and Crime claims in its 2008 World Drug Report that typical U.S. retail prices are $10–15 per gram (approximately $280–420 per ounce). Street prices in North America are known to range from about $40–$400 per ounce ($1.4–$14/g), depending on quality.
There are practical, if cruder alternatives to separate the long fiber for high-quality textile production, but in fact such techniques are used mostly for non-textile applications. This involves production of “whole fibers” (i.e. harvesting both the long fibers from the cortex and the shorter fibers from throughout the stem), and technologies that utilize shortened hemp fibers. This approach is currently dominant in western Europe and Canada, and commences with field dew retting (typically 2–3 weeks). A principal limitation is climatic—the local environment should be suitably but not excessively moist at the close of the harvest season. Once stalks are retted, dried, and baled, they are processed to extract the fiber. In traditional hemp processing, the long fiber was separated from the internal woody hurds in two steps, breaking (stalks were crushed under rollers that broke the woody core into short pieces, some of which were separated) and scutching (the remaining hurds, short fibers (“tow”) and long fibers (“line fiber, ” “long-line fiber”) were separated). A single, relatively expensive machine called a decorticator can do these two steps as one. In general in the EU and Canada, fibers are not separated into tow and line fibers, but are left as “whole fiber.” In western Europe, the fiber is often “cottonized,” i.e. chopped into short segments the size of cotton and flax fiber, so that the fibers can be processed on flax processing machinery, which is very much better developed than such machinery is for hemp. In North America the use of hemp for production of even crude textiles is marginal. Accordingly, the chief current fiber usages of North American, indeed of European hemp, are non-textile.
Topicals represent a newer emerging market in medical marijuana products geared toward health and beauty. Cannabinoids can be absorbed through the skin for certain therapeutic benefits without any psychoactivity. Additionally, the essential oils in hemp and cannabis provide many benefits for skin health. From moisturizers to shampoos and deodorants, medical cannabis products continue to diversify.
Exactly which companies Boehner suggests you invest in in order to build “the kind of wealth that lasts for generations,” he did not say during Tuesday’s nearly hourlong “American Cannabis Summit,” an extended infomercial for the investors’ network, though he and his co-presenters—veteran stock-tip salesman Mike Ward and Danny Brody, who helped take public a Canadian marijuana company that recorded $0 in sales in fiscal year 2018 and had zero kilograms of product in their inventory as of July, according to Seeking Alpha—did drop some clues.
Highly selected forms of the fiber cultigen possess features maximizing fiber production. Since the nodes tend to disrupt the length of the fiber bundles, thereby limiting quality, tall, relatively unbranched plants with long internodes have been selected. Another strategy has been to select stems that are hollow at the internodes, with limited wood, since this maximizes production of fiber in relation to supporting woody tissues. Similarly, limited seed productivity concentrates the plant’s energy into production of fiber, and fiber cultivars often have low genetic propensity for seed output. Selecting monoecious strains overcomes the problem of differential maturation times and quality of male (staminate) and female (pistillate) plants (males mature 1–3 weeks earlier). Male plants in general are taller, albeit slimmer, less robust, and less productive. Except for the troublesome characteristic of dying after anthesis, male traits are favored for fiber production, in contrast to the situation for drug strains noted below. In former, labor-intensive times, the male plants were harvested earlier than the females, to produce superior fiber. The limited branching of fiber cultivars is often compensated for by possession of large leaves with wide leaflets, which obviously increase the photosynthetic ability of the plants. Since fiber plants have not generally been selected for narcotic purposes, the level of intoxicating constituents is usually limited.
Cannabis is believed to be an aggravating factor in rare cases of arteritis, a serious condition that in some cases leads to amputation. Because 97% of case-reports also smoked tobacco, a formal association with cannabis could not be made. If cannabis arteritis turns out to be a distinct clinical entity, it might be the consequence of vasoconstrictor activity observed from delta-8-THC and delta-9-THC. Other serious cardiovascular events including myocardial infarction, stroke, sudden cardiac death, and cardiomyopathy have been reported to be temporally associated with cannabis use. Research in these events is complicated because cannabis is often used in conjunction with tobacco, and drugs such as alcohol and cocaine. These putative effects can be taken in context of a wide range of cardiovascular phenomena regulated by the endocannabinoid system and an overall role of cannabis in causing decreased peripheral resistance and increased cardiac output, which potentially could pose a threat to those with cardiovascular disease. There is some evidence from case reports that cannabis use may provoke fatal cardiovascular events in young people who have not been diagnosed with cardiovascular disease. Smoking cannabis has also been shown to increase the risk of myocardial infarction by 4.8 times for the 60 minutes after consumption.
Cannabinoids are known to interact with the hepatic cytochrome P450 enzyme system.[3,4] In one study, 24 cancer patients were treated with intravenous irinotecan (600 mg, n = 12) or docetaxel (180 mg, n = 12), followed 3 weeks later by the same drugs concomitant with medicinal Cannabis taken in the form of an herbal tea for 15 consecutive days, starting 12 days before the second treatment. The administration of Cannabis did not significantly influence exposure to and clearance of irinotecan or docetaxel, although the herbal tea route of administration may not reproduce the effects of inhalation or oral ingestion of fat-soluble cannabinoids.
© Copyright 2018. Miji Media LLC. All Rights Reserved. These statements have not been evaluated by the Food and Drug Administration. The products mentioned on this site are not intended to diagnose, treat, cure or prevent any disease. As the consumer, it is your responsibility to know your local, state and federal laws before making any purchases. All products on this website are intended for legal use. Prior to purchasing a product(s) on this website, you should confirm legality of the product in the state where you request shipment.
This summary is written and maintained by the PDQ Integrative, Alternative, and Complementary Therapies Editorial Board, which is editorially independent of NCI. The summary reflects an independent review of the literature and does not represent a policy statement of NCI or NIH. More information about summary policies and the role of the PDQ Editorial Boards in maintaining the PDQ summaries can be found on the About This PDQ Summary and PDQ® - NCI's Comprehensive Cancer Database pages.
The main difference between the two is in its chemical composition, specifically in tetrahydrocannabinol (THC). THC is the chemical responsible marijuana’s psychological effects.An average batch of marijuana contains anywhere from 5-20% THC content. Some premium marijuana can have up to 25-30% THC. Hemp, on the other hand, has a max THC level of 0.3%, essentially making it impossible to feel any psychoactive effect or get a “high”. This threshold is heavily regulated in other countries that have legalized hemp.Hemp also has high cannabidiol (CBD) content that acts as THC’s antagonist, essentially making the minimal amount of THC useless.
Designed to provide the optimum absorption of CBD into the blood stream by employing a patented slow release delivery system. It’s well accepted that CBD is most effective when taken sublingualy, however most oils when taken in this way are swallowed and broken down by your body. The Gel-Tab™. is placed under the tongue and the CBD is slowly absorbed resulting in higher rates of CBD being absorbed than what would be achieved with a normal oil
Cannabinoids are a group of 21-carbon–containing terpenophenolic compounds produced uniquely by Cannabis species (e.g., Cannabis sativa L.).[1,2] These plant-derived compounds may be referred to as phytocannabinoids. Although delta-9-tetrahydrocannabinol (THC) is the primary psychoactive ingredient, other known compounds with biologic activity are cannabinol, cannabidiol (CBD), cannabichromene, cannabigerol, tetrahydrocannabivarin, and delta-8-THC. CBD, in particular, is thought to have significant analgesic, anti-inflammatory, and anxiolytic activity without the psychoactive effect (high) of delta-9-THC.
As the range of Tweed and CraftGrow brands and products will change in the Shop over time, we recommend the Spectrum Cannabis brand when consistent access to the same product is important to you and your condition. If you have been taking a Tweed product that is no longer carried or available in our store, we have created a comprehensive table for you to explore alternative options. The goal of this table is to support treatment decisions with products most similar to what you have been taking, when a change is necessary. Learn More
Fiberboard. In North America the use of nonwood fibers in sheet fiberboard (“pressboard” or “composite board”) products is relatively undeveloped. Flax, jute, kenaf, hemp, and wheat straw can be used to make composite board. Wheat straw is the dominant nonwood fiber in such applications. Although it might seem that hemp bast fibers are desirable in composite wood products because of their length and strength, in fact the short fibers of the hurds have been found to produce a superior product (K. Domier, pers. commun.). Experimental production of hemp fiberboard has produced extremely strong material (Fig. 22). The economic viability of such remains to be tested. Molded fiberboard products are commercially viable in Europe (Fig. 23), but their potential in North America remains to be determined.
Air-dried stem yields in Ontario have from 1998 and onward ranged from 2.6-14.0 tonnes of dry, retted stalks per hectare (1-5.5 t/ac) at 12% moisture. Yields in Kent County, have averaged 8.75 t/ha (3.5 t/ac). Northern Ontario crops averaged 6.1 t/ha (2.5 t/ac) in 1998. Statistic for the European Union for 2008 to 2010 say that the average yield of hemp straw has varied between 6.3 and 7.3 ton per ha. Only a part of that is bast fiber. Around one tonne of bast fiber and 2-3 tonnes of core material can be decorticated from 3-4 tonnes of good-quality, dry-retted straw. For an annual yield of this level is it in Ontario recommended to add nitrogen (N):70–110 kg/ha, phosphate (P2O5): up to 80 kg/ha and potash (K2O): 40–90 kg/ha. The average yield of dry hemp stalks in Europe was 6 ton/ha (2.4 ton/ac) in 2001 and 2002.
Along with its better-known counterpart, THC (delta-9-tetrahydrocannabinol, the chemical that produces the marijuana high), CBD is one of more than 400 compounds found in the oils of cannabis plant species, which include marijuana and hemp. Unlike THC, CBD will not make you high. That said, this doesn’t mean CBD is not at all psychoactive, as many assert, says Jahan Marcu, Ph.D., director of experimental pharmacology and behavior at the International Research Center on Cannabis and Mental Health in New York City: “CBD does change cognition. It affects mood, which is why people take it for anxiety. And some find that it makes them more alert.”
Throughout his lifetime, George Washington cultivated hemp at Mount Vernon for industrial uses. The fibers from hemp held excellent properties for making rope and sail canvas. In addition, hemp fibers could be spun into thread for clothing or, as indicated in Mount Vernon records, used in repairing the large seine nets Washington used in his fishing operation along the Potomac.
In the United States, the legality of medical marijuana varies in substantial ways from state to state. There are currently 29 US states with legal medical cannabis laws, as well as the District of Columbia. That leaves 21 states where medical marijuana is entirely prohibited. Marijuana cultivation, possession, and use in any form is illegal at the federal level.
Hemp crops are tall, have thick foliage, and can be planted densely, and thus can be grown as a smother crop to kill tough weeds. Using hemp this way can help farmers avoid the use of herbicides, gain organic certification, and gain the benefits of crop rotation. However, due to the plant's rapid and dense growth characteristics, some jurisdictions consider hemp a prohibited and noxious weed, much like Scotch Broom.
Because of its high THC-content, in most parts of the world, including the US, Marijuana is illegal. Seeing the massive economical and medicinal benefits that Marijuana can provide, some countries and states in the US have legalized Marijuana. As the political landscape changes, hopefully more will follow, but as of now, Marijuana is generally illegal.
Heavy, long term exposure to marijuana may have biologically-based physical, mental, behavioral and social health consequences and may be "associated with diseases of the liver (particularly with co-existing hepatitis C), lungs, heart, and vasculature". It is recommended that cannabis use be stopped before and during pregnancy as it can result in negative outcomes for both the mother and baby. However, maternal use of marijuana during pregnancy does not appear to be associated with low birth weight or early delivery after controlling for tobacco use and other confounding factors. A 2014 review found that while cannabis use may be less harmful than alcohol use, the recommendation to substitute it for problematic drinking is premature without further study. Other side effects include cannabinoid hyperemesis syndrome.
The plant is also known as hemp, although this term is often used to refer only to varieties of Cannabis cultivated for non-drug use. Cannabis has long been used for hemp fibre, for hemp oils, for medicinal purposes, and as a recreational drug. Industrial hemp products are made from cannabis plants selected to produce an abundance of fiber. To satisfy the UN Narcotics Convention, some cannabis strains have been bred to produce minimal levels of tetrahydrocannabinol (THC), the principal psychoactive constituent. Some strains have been selectively bred to produce a maximum of THC (a cannabinoid), the strength of which is enhanced by curing the flowers. Various compounds, including hashish and hash oil, are extracted from the plant.
Spring Hope, NC, Nov. 16, 2018 (GLOBE NEWSWIRE) -- via NEWMEDIAWIRE -- Hemp, Inc. (OTC PINK: HEMP), a global leader in the industrial hemp industry with bi-coastal processing centers including the largest multipurpose industrial hemp processing facility in the western hemisphere (in Spring Hope, North Carolina), announced today Senate Majority Leader Mitch McConnell (R-Ky.) has confirmed the provision legalizing hemp as an agricultural commodity will be included in the final version of the 2018 Farm Bill. McConnell initially introduced the Hemp Farming Act of 2018 in the Senate’s version of the farm bill including provisions to legalize hemp, remove it from the federal list of controlled substances and allow it to be sold as an agricultural commodity. When passed, the bill would also allow states to regulate hemp, as well as allow hemp researchers to apply for grants from the Agriculture Department and make hemp farmers eligible for crop insurance.
In addition to positively affecting the endocannabinoid system, CBD has been the focus of more than 23,000 published studies about cannabinoids in relation to various medical indications including anxiety, epilepsy, inflammation, cancer and chronic pain to name few. For a more comprehensive look at these and other studies, visit our medical research and education page.
Australia's National Cannabis Prevention and Information Centre (NCPIC) states that the buds (flowers) of the female cannabis plant contain the highest concentration of THC, followed by the leaves. The stalks and seeds have "much lower THC levels". The UN states that leaves can contain ten times less THC than the buds, and the stalks one hundred times less THC.
The importation and movement of hemp seeds and plants is restricted under federal law. According to the Statement of Principles on Industrial Hemp (81 Federal Register (FR) 53395) issued by the U.S. Department of Agriculture, U.S. Drug Enforcement Administration, and U.S. Food and Drug Administration, "industrial hemp plants and seeds may not be transported across State lines." For more information, contact the U.S. Drug Enforcement Administration.
Foreign sources, China in particular, can produce hemp seed cheaply, but imported seed must be sterilized, and the delays this usually requires are detrimental. Seed that has been sterilized tends to go rancid quickly, and so it is imperative that fresh seed be available, a great advantage for domestic production. An additional extremely significant advantage that domestic producers have over foreign sources is organic production, which is important for the image desired by the hemp food market. Organic certification is much more reliable in North America than in the foreign countries that offer cheap seeds. Whereas China used to supply most of the hempseed used for food in North America, Canadian-grown seeds have taken over this market.
A mixture of fiberglass, hemp fiber, kenaf, and flax has been used since 2002 to make composite panels for automobiles. The choice of which bast fiber to use is primarily based on cost and availability. Various car makers are beginning to use hemp in their cars, including Audi, BMW, Ford, GM, Chrysler, Honda, Iveco, Lotus, Mercedes, Mitsubishi, Porsche, Saturn, Volkswagen and Volvo. For example, the Lotus Eco Elise and the Mercedes C-Class both contain hemp (up to 20 kg in each car in the case of the latter).