Hemp seeds can be eaten raw, ground into hemp meal, sprouted or made into dried sprout powder. The leaves of the hemp plant can be consumed raw in salads. Hemp seeds can also be made into a liquid and used for baking or for beverages such as hemp milk, hemp juice, and tea. Hemp oil is cold-pressed from the seed and is high in unsaturated fatty acids.
A systematic review assessing 19 studies that evaluated premalignant or malignant lung lesions in persons 18 years or older who inhaled Cannabis concluded that observational studies failed to demonstrate statistically significant associations between Cannabis inhalation and lung cancer after adjusting for tobacco use. In the review of the published meta-analyses, the National Academies of Sciences, Engineering, and Medicine (NASEM) report concluded that there was moderate evidence of no statistical association between Cannabis smoking and the incidence of lung cancer.
The psychoactive effects of cannabis are known to have a triphasic nature. Primary psychoactive effects include a state of relaxation, and to a lesser degree, euphoria from its main psychoactive compound, tetrahydrocannabinol. Secondary psychoactive effects, such as a facility for philosophical thinking, introspection and metacognition have been reported among cases of anxiety and paranoia. Finally, the tertiary psychoactive effects of the drug cannabis, can include an increase in heart rate and hunger, believed to be caused by 11-OH-THC, a psychoactive metabolite of THC produced in the liver.
It is clear that there is a culture of idealistic believers in hemp in North America, and that there is great determination to establish the industry. As history has demonstrated, unbridled enthusiasm for largely untested new crops touted as gold mines sometimes leads to disaster. The attempt to raise silk in the US is probably the most egregious example. In 1826 a Congressional report that recommended the preparation of a practical manual on the industry resulted in a contagious desire to plant mulberries for silk production, with the eventual collapse of the industry, the loss of fortunes, and a legacy of “Mulberry Streets” in the US (Chapter 2, Bailey 1898). In the early 1980s in Minnesota, Jerusalem artichoke was touted as a fuel, a feed, a food, and a sugar crop. Unfortunately there was no market for the new “wonder crop” and hundreds of farmers lost about $20 million (Paarlberg 1990). The level of “hype” associated with industrial hemp is far more than has been observed before for other new crops (Pinfold Consulting 1998). Probably more so than any plant in living memory, hemp attracts people to attempt its cultivation without first acquiring a realistic appreciation of the possible pitfalls. American presidents George Washington and Thomas Jefferson encouraged the cultivation of hemp, but both lost money trying to grow it. Sadly in Canada in 1999 numerous farmers contracted to grow half of Canada’s crop area for hemp for the American-based Consolidated Growers and Processors, and with the collapse of the firm were left holding very large amounts of unmarketable grain and baled hemp straw. This has represented a most untimely setback for a fledgling industry, but at least has had a sobering effect on investing in hemp. In this section we emphasize why producers should exercise caution before getting into hemp.
Medical cannabis (or medical marijuana) refers to the use of cannabis and its constituent cannabinoids, to treat disease or improve symptoms. Cannabis is used to reduce nausea and vomiting during chemotherapy, to improve appetite in people with HIV/AIDS, and to treat chronic pain and muscle spasms. Cannabinoids are under preliminary research for their potential to affect stroke.
Industrial hemp is a versatile agricultural plant which could one day be a valuable crop option for Pennsylvania farmers. The Commonwealth of Pennsylvania has taken some important steps toward making that a reality. Following Governor Wolf’s signing of the Industrial Hemp Research Act, Number 92 in 2016, the Pennsylvania Department of Agriculture’s Industrial Hemp Research Pilot Program started issuing permits for research & growth of industrial hemp in 2017. Pennsylvania’s industrial hemp legislation was sparked by the passage of the 2014 Farm Bill, which gave federal permission for institutions of higher education or state Departments of Agriculture to research the cultivation and marketing of industrial hemp. As part of Pennsylvania’s Research Pilot Program, industrial hemp was legally grown in the Commonwealth after an 80 years hiatus. The Department of Agriculture has issued 35 research permits in the last two years to institutions of higher education and to farmers, business or individuals in contract with the Department to participate in the research of industrial hemp cultivation and marketing in Pennsylvania. In 2018, 35 research permits were issued to researchers, who cultivated industrial hemp in 25 Pennsylvania counties.
Hemp hasn't always been on the wrong side of the authorities. The Puritans brought hemp with them to New England in 1645 and Europeans were growing it even earlier in Chile. George Washington planted hemp as one of several crops at his Mount Vernon estate. However, hemp's popularity waned in America as other plants used for textiles such as cotton and jute became more widely available. The U.S. Navy briefly campaigned for more hemp farming during World War II to supply ropes for ships. But the federal government continued restrictions on hemp after the war.
I have digenerative disc disease/4 bulgin discs was taking 9---10mg hydrocodones a day... i started with 3 drops of 300mg and within 5 mins started feeling better than i have theses last 6 years or so... not only that, the inflamation has decrease substantially, i wake up with energy and have begun to work out again... if im making it seem like a miracle drug... its because it is... so the first week i took 3 drops twice a day... now 3 weeks in... im taking about 5 drops 3 times a day and zero pain pills... for the first time in years i have taken control of my life agin... not depending on doctor scripts/bills etc....
Traditionally, hemp stalks would be water-retted first before the fibers were beaten off the inner hurd by hand, a process known as scutching. As mechanical technology evolved, separating the fiber from the core was accomplished by crushing rollers and brush rollers that would produce a nearly clean fiber. After the Marijuana Tax Act was implemented in 1938, the technology for separating the fibers from the core remained "frozen in time".
CBD E-Liquid/Vape Cartridges: Vaping is excellent for people looking for an immediate response, as inhalation is the fastest way to deliver CBDs to your brain and body. To use vape simply exhale gently the air from your lungs then inhale through the mouthpiece slowly for 3 seconds. Then fill your lungs the rest of the way with additional breath and hold for a few seconds, exhaling when ready. There are pre-filled, cost-effective vape pens and cartridges available as well as more expensive vaporizers that you can refill with CBD-infused e-liquid.
“Geotextiles” or “agricultural textiles” include (1) ground-retaining, biodegradable matting designed to prevent soil erosion, especially to stabilize new plantings while they develop root systems along steep highway banks to prevent soil slippage (Fig. 32); and (2) ground-covers designed to reduce weeds in planting beds (in the manner of plastic mulch). At present the main materials used are polymeric (polythene, spun-blown polypropylene) and some glass fiber and natural fibers. Both woven and non-woven fibers can be applied to geotextiles; woven and knitted materials are stronger and the open structure may be advantageous (e.g. in allowing plants to grow through), but non-wovens are cheaper and better at suppressing weeds. Flax and hemp fibers exposed to water and soil have been claimed to disintegrate rapidly over the course of a few months, which would make them unacceptable for products that need to have long-term stability when exposed to water and oil. Coco (coir) fiber has been said to be much more suitable, due to higher lignin content (40%–50%, compared to 2%–5% in bast fibers); these are much cheaper than flax and hemp fibers (Karus et al. 2000). However, this analysis does not do justice to the developing hemp geotextile market. Production of hemp erosion control mats is continuing in both Europe and Canada. Given the reputation for rot resistance of hemp canvas and rope, it seems probable that ground matting is a legitimate use. Moreover, the ability to last outdoors for many years is frequently undesirable in geotextiles. For example, the widespread current use of plastic netting to reinforce grass sod is quite objectionable, the plastic persisting for many years and interfering with lawn care. Related to geotextile applications is the possibility of using hemp fiber as a planting substrate (biodegradable pots and blocks for plants), and as biodegradable twine to replace plastic ties used to attach plants to supporting poles. Still another consideration is the “green ideal” of producing locally for local needs; by this credo, hemp is preferable in temperate regions to the use of tropical fibers, which need to be imported.
The “re-“growth of industrial hemp in the United States is heavily regulated, although the neighbouring nation of Canada successfully grows hemp commercially. Since becoming legal to grow again in Canada, the crop has taken off and has become a booming multi-million dollar export. Hemp building materials are another growing segment of the hemp industry. Canada is now a leader in the global hemp food/health marketplace. Canadian hemp products can be found in many hemp markets now in the United States and the world over.
Unlike other Cannabis sativa varieties and hybrids, which are mostly grown for their chemically potent flowers (or 'buds'), hemp is also legally distinguished from marijuana in the US as containing less than 0.3% of the cannabinoid chemical THC — considered to be the most intoxicating, psychoactive component in cannabis plants, as well as a treatment option for certain serious illnesses.
According to the United Nations Office on Drugs and Crime (UNODC), "the amount of THC present in a cannabis sample is generally used as a measure of cannabis potency." The three main forms of cannabis products are the flower, resin (hashish), and oil (hash oil). The UNODC states that cannabis often contains 5% THC content, resin "can contain up to 20% THC content", and that "Cannabis oil may contain more than 60% THC content."
Several animal studies have led researchers to believe that cannabis could reverse signs of aging in the brain. Aging mice treated with small daily doses of THC showed a reversal in cognitive decline. However, past studies on the effects of cannabis on human memory show less promising results. Still, with few viable treatments for dementia, medical marijuana is receiving increased attention in this area.
Jump up ^ "Sativex Oral Mucosal Spray Public Assessment Report. Decentralized Procedure" (PDF). United Kingdom Medicines and Healthcare Products Regulatory Agency. p. 93. Retrieved 2015-05-07. There is clear evidence that recreational cannabis can produce a transient toxic psychosis in larger doses or in susceptible individuals, which is said to characteristically resolve within a week or so of absence (Johns 2001). Transient psychotic episodes as a component of acute intoxication are well-documented (Hall et al 1994)
Jump up ^ Klein C, Karanges E, Spiro A, Wong A, Spencer J, Huynh T, Gunasekaran N, Karl T, Long LE, Huang XF, Liu K, Arnold JC, McGregor IS (November 2011). "Cannabidiol potentiates Δ⁹-tetrahydrocannabinol (THC) behavioural effects and alters THC pharmacokinetics during acute and chronic treatment in adolescent rats". Psychopharmacology. 218 (2): 443–457. doi:10.1007/s00213-011-2342-0. PMID 21667074.
A randomized, placebo-controlled, crossover pilot study of nabiximols in 16 patients with chemotherapy-induced neuropathic pain showed no significant difference between the treatment and placebo groups. A responder analysis, however, demonstrated that five patients reported a reduction in their pain of at least 2 points on an 11-point scale, suggesting that a larger follow-up study may be warranted.
Jump up ^ Datwyler, SL; Weiblen, GD (2006). "Genetic Variation in Hemp and marijuana (Cannabis sativa L.) sativa plants are taller and less dense. Indica plants are shorter but a lot more dense than sativas. According to Amplified Fragment Length Polymorphisms". Journal of Forensic Sciences. 51 (2): 371–375. doi:10.1111/j.1556-4029.2006.00061.x. PMID 16566773.
My Wife had Polio at age 5 and the lingering damage to the L leg and muscle drove her crazy. At age 21 she was using heavy doses of muscle relaxers and pain meds. Needed to bomb herself at night to get some sleep. A Post polio group in West Palm Beach told her about Marijuana and she got some from the Jamaican health aide that was her constant helper. After 5 months she quit all meds. All of them. Slowly came out of the drugged state the meds had caused from 15 years of use. We separated good friends and I know she has gone back to school and getting a degree. All from the help of a plant from Jamaica. I never understood the statement this plant has no viable medical value. Something smells in the politics of this prohibition. Shame.
Individuals who are considering participation in the Industrial Hemp Research Program in Kansas in 2019, whether as a grower, distributor or processor, can now submit a Pre-Application and Pre-Application Research Proposal. This is voluntary, and is not an application for a license, but will provide an opportunity to receive an informal review of your research proposal which can help expedite the process when the full research application is available.
Hemp is grown in temperate zones as an annual cultivated from seed and can reach a height of up to 5 metres (16 feet). Crops grow best in sandy loam with good drainage and require average monthly rainfall of at least 65 mm (2.5 inches) throughout the growing season. Crops cultivated for fibre are densely sowed and produce plants averaging 2–3 metres (6–10 feet) tall with almost no branching. Plants grown for oilseed are planted farther apart and are shorter and many-branched. The slender stalks are hollow except at the tip and base. The leaves are compound with palmate shape, and the flowers are small and greenish yellow. Seed-producing flowers form elongate, spikelike clusters growing on the pistillate, or female, plants. Pollen-producing flowers form many-branched clusters on staminate, or male, plants. Maximum yield and quality are obtained by harvesting soon after the plants reach maturity, indicated by the full blossoms and freely shedding pollen of the male plants. Although sometimes pulled up by hand, plants are more often cut off about 2.5 cm (1 inch) above the ground.
Jungmann and Thomas aren’t the only ones relying on China for their hemp supply. Today, Patagonia carries about two dozen products in hemp. Most are mixed with other materials, namely organic cotton. Jill Dumain, director of environmental strategy at Patagonia, developed the first hemp supply chain for the outdoor brand in the 1990s. She recalls trying to find suppliers of hemp fabrics in the US and getting frustrated because most of these suppliers were more interested in legalizing marijuana, rather than industrial hemp for fashion. When she requested cost estimates for fabric, she would get price sheets for puny quantities: five to 10 yards.
In November 2015, Uttarakhand became the first state of India to legalize the cultivation of hemp for industrial purposes. Usage within the Hindu and Buddhist cultures of the Indian subcontinent is common, with many street vendors in India openly selling products infused with cannabis, and traditional medical practitioners in Sri Lanka selling products infused with cannabis for recreational purposes and well as for religious celebrations. It was criminalized in the Indian subcontinent by the Dutch and then the British. India and Sri Lanka have allowed cannabis to be taken in the context of traditional culture for recreational/celebratory purposes and also for medicinal purposes.
It's the Wild West out there. Without any federal regulatory body checking labels, consumers have very little way of knowing what they're buying when they purchase CBD oil. Bonn-Miller co-authored a study that found that 26 percent of CBD products on the market contained less CBD than their label claimed. So the amount you need for an effective dose could vary drastically, not just from product to product, but from bottle to bottle of the same product.
The woody core (hurds, sometimes called shives) of hemp makes remarkably good animal bedding (Fig. 28, 29). The hurds are sometimes molded into small pellets for bedding applications (Fig. 30). Such appears to be unsurpassed for horse bedding, and also make an excellent litter for cats and other pets (Fig. 31). The hurds can absorb up to five times their weight in moisture (typically 50% higher than wood shavings), do not produce dust (following initial dust removal), and are easily composted. Hemp bedding is especially suited to horses allergic to straw. In Europe, the animal bedding market is not considered important (Karus et al. 2000), but in North America there are insufficient hemp hurds available to meet market demand.
Neurologists are skilled at predicting side effects and interactions between well-researched pharmaceuticals. But due to the dearth of reliable research about CBD, doctors like Hernandez and Knupp cannot guide their patients in its use. If there are adverse reactions, Penny will find out because Harper will suffer through them. She has had to figure out through trial and error how best to mix and measure Harper’s oils. The bottom line, Penny said, is simple: “We are the research.”
Following an 1836–1840 travel in North Africa and the Middle East, French physician Jacques-Joseph Moreau wrote on the psychological effects of cannabis use; Moreau was a member of Paris' Club des Hashischins (founded in 1844). In 1842, Irish physician William Brooke O'Shaughnessy, who had studied the drug while working as a medical officer in Bengal with the East India company, brought a quantity of cannabis with him on his return to Britain, provoking renewed interest in the West. Examples of classic literature of the period featuring cannabis include Les paradis artificiels (1860) by Charles Baudelaire and The Hasheesh Eater (1857) by Fitz Hugh Ludlow.
With respect to fiber, a “composite” is often defined as a material consisting of 30%–70% fiber and 70%–30% matrix (Bolton 1995). However, in North America particleboards and fiberboards, which generally contain less than 10% adhesive or matrix, are sometimes referred to as composites. This section addresses plastic-type composites. In plastics, fibers are introduced to improve physical properties such as stiffness, impact resistance, bending and tensile strength. Man-made fibers of glass, kevlar and carbon are most commonly used today, but plant fibers offer considerable cost savings along with comparable strength properties.
Hemp, Canabis sativa is a plant originally from central Asia. It was cultivated with, and sometimes in place of flax because the stem fibers are similar. By the seventeenth century, Russia, Latvia, and other countries around the Baltic Sea were the major producers of hemp. It was from these areas Britain obtained its supply. However, during periods of military hostilities, the English had trouble acquiring enough hemp.
Cannabis is by far the most widely cultivated, trafficked and abused illicit drug. Half of all drug seizures worldwide are cannabis seizures. The geographical spread of those seizures is also global, covering practically every country of the world. About 147 million people, 2.5% of the world population, consume cannabis (annual prevalence) compared with 0.2% consuming cocaine and 0.2% consuming opiates. In the present decade, cannabis abuse has grown more rapidly than cocaine and opiate abuse. The most rapid growth in cannabis abuse since the 1960s has been in developed countries in North America, Western Europe and Australia. Cannabis has become more closely linked to youth culture and the age of initiation is usually lower than for other drugs. An analysis of cannabis markets shows that low prices coincide with high levels of abuse, and vice versa. Cannabis appears to be price-inelastic in the short term, but fairly elastic over the longer term. Though the number of cannabis consumers is greater than opiate and cocaine consumers, the lower prices of cannabis mean that, in economic terms, the cannabis market is much smaller than the opiate or cocaine market.
Cannabinoids are a class of compounds that interact with receptors throughout your body. CBD is just one of dozens of cannabinoids found in cannabis, including tetrahydrocannabinol (THC), which is the one responsible for marijuana’s famous high. Medical cannabis is technically any cannabis product used for medicinal purposes, and these can contain THC or CBD or both, said Nick Jikomes, a neuroscientist at Leafly, a website that provides information about legal cannabis. “A common mistake people make is to think that CBD is ‘the medical cannabinoid’ and THC is ‘the recreational cannabinoid.’” That’s inaccurate, he said, because THC is a potent anti-inflammatory and can be helpful for pain.
Content on this website is provided for information purposes only. Information about a therapy, service, product or treatment does not in any way endorse or support such therapy, service, product or treatment and is not intended to replace advice from your doctor or other registered health professional. The information and materials contained on this website are not intended to constitute a comprehensive guide concerning all aspects of the therapy, product or treatment described on the website. All users are urged to always seek advice from a registered health care professional for diagnosis and answers to their medical questions and to ascertain whether the particular therapy, service, product or treatment described on the website is suitable in their circumstances. The State of Victoria and the Department of Health & Human Services shall not bear any liability for reliance by any user on the materials contained on this website.
The seeds are sown from mid-April to mid-May with grain drills to 4–6 cm sowing depth. Hemp needs less fertilizer than corn does. A total of 60–150 kg of nitrogen, 40–140 kg phosphorus (P2O5) and 75–200 kg of potassium  per acre for hemp fiber made before sowing and again later, maybe three to four weeks. When practiced, especially in France double use of fiber and seed fertilization with nitrogen doses up to 100 kg / ha rather low. Organic fertilizers such as manure can utilize industrial hemp well. Neither weeds nor crop protection measures are necessary.