Based on reviews, smoking or vaporizing CBD vape oil seems to have less effects when compared to other methods of administering CBD, such as tinctures, capsules and sprays. On the flip side, others argue that smoking or vaporizing has less drawbacks than taking CBD orally, since ingesting CBD orally could result in inconsistent absorption and a delayed effect.
But, uh, what is it that CBD is supposed to do? I visited a cannabis dispensary in Boulder to find out what the hype was all about. After passing an ID check, I was introduced to a “budtender” who pointed me to an impressive array of CBD products — tinctures, skin patches, drink powders, candies, salves, massage oil, lotions, “sexy time personal intimacy oil” and even vaginal suppositories to treat menstrual cramps.
Many monoecious varieties have also been described, in which individual plants bear both male and female flowers. (Although monoecious plants are often referred to as "hermaphrodites", true hermaphrodites – which are less common in Cannabis – bear staminate and pistillate structures together on individual flowers, whereas monoecious plants bear male and female flowers at different locations on the same plant.) Subdioecy (the occurrence of monoecious individuals and dioecious individuals within the same population) is widespread. Many populations have been described as sexually labile.
μ-Opioid receptor agonists (opioids) (e.g., morphine, heroin, hydrocodone, oxycodone, opium, kratom) α2δ subunit-containing voltage-dependent calcium channels blockers (gabapentinoids) (e.g., gabapentin, pregabalin, phenibut) AMPA receptor antagonists (e.g., perampanel) CB1 receptor agonists (cannabinoids) (e.g., THC, cannabis) Dopamine receptor agonists (e.g., levodopa) Dopamine releasing agents (e.g., amphetamine, methamphetamine, MDMA, mephedrone) Dopamine reuptake inhibitors (e.g., cocaine, methylphenidate) GABAA receptor positive allosteric modulators (e.g., barbiturates, benzodiazepines, carbamates, ethanol (alcohol) (alcoholic drink), inhalants, nonbenzodiazepines, quinazolinones) GHB (sodium oxybate) and analogues Glucocorticoids (corticosteroids) (e.g., dexamethasone, prednisone) nACh receptor agonists (e.g., nicotine, tobacco, arecoline, areca nut) Nitric oxide prodrugs (e.g., alkyl nitrites (poppers)) NMDA receptor antagonists (e.g., DXM, ketamine, methoxetamine, nitrous oxide, phencyclidine, inhalants) Orexin receptor antagonists (e.g., suvorexant)
Since the beginning of the 20th century, most countries have enacted laws against the cultivation, possession or transfer of cannabis. These laws have impacted adversely on cannabis cultivation for non-recreational purposes, but there are many regions where handling of cannabis is legal or licensed. Many jurisdictions have lessened the penalties for possession of small quantities of cannabis so that it is punished by confiscation and sometimes a fine, rather than imprisonment, focusing more on those who traffic the drug on the black market.
Epidemiologic studies examining one association of Cannabis use with head and neck squamous cell carcinomas have also been inconsistent in their findings. A pooled analysis of nine case-control studies from the U.S./Latin American International Head and Neck Cancer Epidemiology (INHANCE) Consortium included information from 1,921 oropharyngeal cases, 356 tongue cases, and 7,639 controls. Compared with those who never smoked Cannabis, Cannabis smokers had an elevated risk of oropharyngeal cancers and a reduced risk of tongue cancer. These study results both reflect the inconsistent effects of cannabinoids on cancer incidence noted in previous studies and suggest that more work needs to be done to understand the potential role of human papillomavirus infection. A systematic review and meta-analysis of nine case-control studies involving 13,931 participants also concluded that there was insufficient evidence to support or refute a positive or negative association between Cannabis smoking and the incidence of head and neck cancers.
By 1938, Popular Mechanics called hemp the “Billion Dollar Crop,”1 praising its potential to produce 25,000 different products, as high as $192 billion in today’s market and capable of producing four times the paper per acre than trees. Farmers from the Midwest to the East coast harvested more than 150,000 acres for the war’s Hemp for Victory Program, implemented by the USDA from 1942 through 1946, but rumblings by the competition had already started.
I have digenerative disc disease/4 bulgin discs was taking 9---10mg hydrocodones a day... i started with 3 drops of 300mg and within 5 mins started feeling better than i have theses last 6 years or so... not only that, the inflamation has decrease substantially, i wake up with energy and have begun to work out again... if im making it seem like a miracle drug... its because it is... so the first week i took 3 drops twice a day... now 3 weeks in... im taking about 5 drops 3 times a day and zero pain pills... for the first time in years i have taken control of my life agin... not depending on doctor scripts/bills etc....
That being said, it was unlikely that the federal government was interested in pursuing individuals complying with state-mandated regulations surrounding legalized cannabis for recreational use, although the CSA law still gives them authority to do so. However, the new Trump administration may change this thinking and users of legal marijuana and legal dispensaries await further action and clarifying rules.
Canadian experience with growing hemp commercially for the last 4 years has convinced many growers that it is better to use a single-purpose cultivar, seed or fiber, than a dual-purpose cultivar. The recent focus of Canadian hemp breeders has been to develop cultivars with high seed yields, low stature (to avoid channeling the plants’ energy into stalk, as is the case in fiber cultivars), early maturation (for the short growing seasons of Canada), and desirable fatty acid spectrum (especially gamma-linolenic acid).
About 9% of those who experiment with marijuana eventually become dependent according to DSM-IV (1994) criteria. A 2013 review estimates daily use is associated with a 10-20% rate of dependence. The highest risk of cannabis dependence is found in those with a history of poor academic achievement, deviant behavior in childhood and adolescence, rebelliousness, poor parental relationships, or a parental history of drug and alcohol problems. Of daily users, about 50% experience withdrawal upon cessation of use (i.e. are dependent), characterized by sleep problems, irritability, dysphoria, and craving. Cannabis withdrawal is less severe than withdrawal from alcohol.
Based on studies of sex reversal in hemp, it was first reported by K. Hirata in 1924 that an XY sex-determination system is present. At the time, the XY system was the only known system of sex determination. The X:A system was first described in Drosophila spp in 1925. Soon thereafter, Schaffner disputed Hirata's interpretation, and published results from his own studies of sex reversal in hemp, concluding that an X:A system was in use and that furthermore sex was strongly influenced by environmental conditions.
Marijuana, also called pot, weed, ganja, mary jane, and a host of other nicknames, is made from the Cannabis plant, which has three species: Cannabis sativa; Cannabis indica and Cannabis ruderalis. The flowering plant, which can grow to 16 feet (5 meters) high, likely originated in the Central Asian steppe, near the Altai or Tian Shian Mountains, and was first cultivated in China and India, according to "Cannabis and Cannabinoids: Pharmacology, Toxicology and Therapeutic Potential," (Routledge, 2002).
So a full spectrum decarb got higher points than isolate (“decarb” just refers to the process of decarboxylation which turns raw CBD into activated CBD). We also gave more points to companies with a “broad spectrum” tincture. Broad spectrum CBD oil includes a range of other cannabinoids, but minus the THC – which is generally what people using isolates are trying to avoid.
Cannabis is mostly used for recreation or as a medicinal drug, although it may also be used for spiritual purposes. In 2013, between 128 and 232 million people used cannabis (2.7% to 4.9% of the global population between the ages of 15 and 65). It is the most commonly used illegal drug both in the world and the United States. The countries with the highest use among adults as of 2018 are Zambia, the United States, Canada, and Nigeria. In 2016, 51% of people in the United States had ever used cannabis. About 12% had used it in the past year, and 7.3% had used it in the past month.
Edible cannabis, however, is quickly making up ground as a go-to method for consuming medical marijuana. Indeed, some states with legal medical marijuana laws still forbid smoking marijuana. Instead, medical forms of the drug are only available in pill or capsule form. Oils and tinctures, which are made from extracting cannabinoids from herbaceous material, are also commonly prescribed in the form of cannabis edibles.
There have been ten clinical trials on the use of inhaled Cannabis in cancer patients that can be divided into two groups. In one group, four small studies assessed antiemetic activity but each explored a different patient population and chemotherapy regimen. One study demonstrated no effect, the second study showed a positive effect versus placebo, the report of the third study did not provide enough information to characterize the overall outcome as positive or neutral. Consequently, there are insufficient data to provide an overall level of evidence assessment for the use of Cannabis for chemotherapy-induced N/V. Apparently, there are no published controlled clinical trials on the use of inhaled Cannabis for other cancer-related or cancer treatment–related symptoms.
Both in Canada and the US, the most critical problem to be addressed for commercial exploitation of C. sativa is the possible unauthorized drug use of the plant. Indeed, the reason hemp cultivation was made illegal in North America was concern that the hemp crop was a drug menace. The drug potential is, for practical purposes, measured by the presence of THC. THC is the world’s most popular illicit chemical, and indeed the fourth most popular recreational drug, after caffeine, alcohol, and nicotine. “Industrial hemp” is a phrase that has become common to designate hemp used for commercial non-intoxicant purposes. Small and Cronquist (1976) split C. sativa into two subspecies: C. sativa subsp. sativa, with less than 0.3% (dry weight) of THC in the upper (reproductive) part of the plant, and C. sativa subsp. indica (Lam.) E. Small & Cronq. with more than 0.3% THC. This classification has since been adopted in the European Community, Canada, and parts of Australia as a dividing line between cultivars that can be legally cultivated under license and forms that are considered to have too high a drug potential. For a period, 0.3% was also the allowable THC content limit for cultivation of hemp in the Soviet Union. In the US, Drug Enforcement Agency guidelines issued Dec. 7, 1999 expressly allowed products with a THC content of less than 0.3% to enter the US without a license; but subsequently permissible levels have been a source of continuing contention. Marijuana in the illicit market typically has a THC content of 5% to 10% (levels as high as 25% have been reported), and as a point of interest, a current Canadian government experimental medicinal marijuana production contract calls for the production of 6% marijuana. As noted above, a level of about 1% THC is considered the threshold for marijuana to have intoxicating potential, so the 0.3% level is conservative, and some countries (e.g. parts of Australia, Switzerland) have permitted the cultivation of cultivars with higher levels. It should be appreciated that there is considerable variation in THC content in different parts of the plant. THC content increases in the following order: achenes (excluding bracts), roots, large stems, smaller stems, older and larger leaves, younger and smaller leaves, flowers, perigonal bracts covering both the female flowers and fruits. It is well known in the illicit trade how to screen off the more potent fractions of the plant in order to increase THC levels in resultant drug products. Nevertheless, a level of 0.3% THC in the flowering parts of the plant is reflective of material that is too low in intoxicant potential to actually be used practically for illicit production of marijuana or other types of cannabis drugs. Below, the problem of permissible levels of THC in food products made from hempseed is discussed.
I have/had ovarian/primary peritoneal cancer. I used thc/cbd oil pills I self made from the start. I am supposedly their “poster child”. I went thru with chemo and surgery. Oh that horror! But when I tried to tell two seperate doctors, the surgeon was all about it, and my oncologist threw a fit and said it was an anecdote. There are more than 100 studies at the NIH govt website.
We also rated the product based on the type of CBD they used: isolate, full-spectrum decarb, broad-spectrum, or distillate. There’s a lot of debate around what is actually best, but our first decision was to give points to CBD oil that contains a range of cannabinoids. While there are certainly people with good reasons for choosing an isolate, there’s a lot of good evidence that CBD works better in combination with other cannabinoids (this is called the “entourage effect”).
Cultivated industrial hemp plants usually consist of a spindly main stalk covered with leaves. Considered a low-maintenance crop, hemp plants typically reach between 6 to 15 feet in height. Depending on the purpose, variety and climatic conditions, the period between planting and harvesting ranges from 70 to 140 days. One acre of hemp can yield an average of 700 pounds of grain, which in turn can be pressed into about 22 gallons of oil and 530 pounds of meal. The same acre will also produce an average of 5,300 pounds of straw, which can be transformed into approximately 1,300 pounds of fiber.
The pulp and paper industry based on wood has considered the use of hemp for pulp, but only on an experimental basis. Hemp’s long fibers could make paper more recyclable. Since virgin pulp is required for added strength in the recycling of paper, hemp pulp would allow for at least twice as many cycles as wood pulp. However, various analyses have concluded that the use of hemp for conventional paper pulp is not profitable (Fertig 1996).
In 2013, BMW announced its newest electric car, the i3. Using low-weight hemp in its interior, the i3 weighs 800 pounds less than its market competitors. The Kestrel, created by Canadian Motive Industries, uses polymer resin-infused hemp stalks to replace fiberglass in the body of the vehicle. From this replacement, consumers can expect a dramatic reduction in weight, improved efficiency and the appeal of an ecologically sustainable vehicle.
Zuardi, A. W., Crippa, J. A., Hallak, J. E., Bhattacharyya, S., Atakan, Z., Martin-Santos, R., … & Guimarães, F. S. (2012). A critical review of the antipsychotic effects of cannabidiol: 30 years of a translational investigation [Abstract]. Current Pharmaceutical Design, 18(32), 5,131–5,140. Retrieved from https://www.ncbi.nlm.nih.gov/pubmed/22716160
Environmental sex determination is known to occur in a variety of species. Many researchers have suggested that sex in Cannabis is determined or strongly influenced by environmental factors. Ainsworth reviews that treatment with auxin and ethylene have feminizing effects, and that treatment with cytokinins and gibberellins have masculinizing effects. It has been reported that sex can be reversed in Cannabis using chemical treatment. A PCR-based method for the detection of female-associated DNA polymorphisms by genotyping has been developed.
The opportunity to grow a new specialty oilseed crop in Kansas offers potential for diversification for Kansas farmers looking for an alternative crop, or for new farming enterprises interested in cultivating industrial hemp. The Kansas agriculture industry has developed a statewide strategic growth plan in recent years, and is committed to pursuing new and innovative opportunities to grow agriculture. The research generated by participants of this new industrial hemp program will be valuable data in identifying the growth potential offered in this sector.
The 2014 US Farm Bill allows states that have passed their own industrial hemp legislation to grow industrial hemp for purposes of research and development. Several states — including Kentucky, Colorado, and Oregon — are already conducting hemp pilot projects. Many other states are currently pursuing similar legislation and programs. After many years of prohibition, American farmers are finally reacquainting themselves with industrial hemp.
The basic commercial options for growing hemp in North America is as a fiber plant, an oilseed crop, or for dual harvest for both seeds and fiber. Judged on experience in Canada to date, the industry is inclined to specialize on either fiber or grain, but not both. Hemp in our opinion is particularly suited to be developed as an oilseed crop in North America. The first and foremost breeding goal is to decrease the price of hempseed by creating more productive cultivars. While the breeding of hemp fiber cultivars has proceeded to the point that only slight improvements can be expected in productivity in the future, the genetic potential of hemp as an oilseed has scarcely been addressed. From the point of view of world markets, concentrating on oilseed hemp makes sense, because Europe has shown only limited interest to date in developing oilseed hemp, whereas a tradition of concentrating on profitable oilseed products is already well established in the US and Canada. Further, China’s supremacy in the production of high-quality hemp textiles at low prices will be very difficult to match, while domestic production of oilseeds can be carried out using technology that is already available. The present productivity of oilseed hemp—about 1 t/ha under good conditions, and occasional reports of 1.5 to 2 t/ha, is not yet sufficient for the crop to become competitive with North America’s major oilseeds. We suggest that an average productivity of 2 t/ha will be necessary to transform hempseed into a major oilseed, and that this breeding goal is achievable. At present, losses of 30% of the seed yields are not uncommon, so that improvements in harvesting technology should also contribute to higher yields. Hemp food products cannot escape their niche market status until the price of hempseed rivals that of other oilseeds, particularly rapeseed, flax, and sunflower. Most hemp breeding that has been conducted to date has been for fiber characteristics, so that there should be considerable improvement possible. The second breeding goal is for larger seeds, as these are more easily shelled. Third is breeding for specific seed components. Notable are the health-promoting gamma-linolenic acid; improving the amino acid spectrum of the protein; and increasing the antioxidant level, which would not only have health benefits but could increase the shelf life of hemp oil and foods.
Some studies state that while there is no proof for the gateway hypothesis, young cannabis users should still be considered as a risk group for intervention programs. Other findings indicate that hard drug users are likely to be poly-drug users, and that interventions must address the use of multiple drugs instead of a single hard drug. Almost two-thirds of the poly drug users in the "2009/10 Scottish Crime and Justice Survey" used cannabis.
A randomized, placebo-controlled, crossover pilot study of nabiximols in 16 patients with chemotherapy-induced neuropathic pain showed no significant difference between the treatment and placebo groups. A responder analysis, however, demonstrated that five patients reported a reduction in their pain of at least 2 points on an 11-point scale, suggesting that a larger follow-up study may be warranted.
Hemp does best on a loose, well-aerated loam soil with high fertility and abundant organic matter. Well-drained clay soils can be used, but poorly-drained clay soils are very inappropriate because of their susceptibility to compaction, which is not tolerated. Young plants are sensitive to wet or flooded soils, so that hemp must have porous, friable, well-drained soils. Sandy soils will grow good hemp, provided that adequate irrigation and fertilization are provided, but doing so generally makes production uneconomical. Seedbed preparation requires considerable effort. Fall plowing is recommended, followed by careful preparation of a seedbed in the spring. The seedbed should be fine, level, and firm. Seed is best planted at 2–3 cm (twice as deep will be tolerated). Although the seedlings will germinate and survive at temperatures just above freezing, soil temperatures of 8°–10°C are preferable. Generally hemp should be planted after danger of hard freezes, and slightly before the planting date of maize. Good soil moisture is necessary for seed germination, and plenty of rainfall is needed for good growth, especially during the first 6 weeks. Seeding rate is specific to each variety, and this information should be sought from the supplier. Fiber strains are typically sown at a minimum rate of 250 seeds per m2 (approximately 45 kg/ha), and up to three times this density is sometimes recommended. In western Europe, seeding rates range from 60–70 kg/ha for fiber cultivars. Recommendations for seeding rates for grain production vary widely, from 10–45 kg/ha. Densities for seed production for tall, European, dual-purpose cultivars are less than for short oilseed cultivars. Low plant densities, as commonly found in growing tall European cultivars for seed, may not suppress weed growth adequately, and under these circumstances resort to herbicides may pose a problem for those wishing to grow hempseed organically. Hemp requires about the same fertility as a high-yielding crop of wheat. Industrial hemp grows well in areas that corn produces high yields. Growing hemp may require addition of up to 110 kg/ha of nitrogen, and 40–90 kg/ha of potash. Hemp particularly requires good nitrogen fertilization, more so for seed production than fiber. Adding nitrogen when it is not necessary is deleterious to fiber production, so that knowledge of the fertility of soils being used is very important. Organic matter is preferably over 3.5%, phosphorus should be medium to high (>40 ppm), potassium should be medium to high (>250 ppm), sulfur good (>5,000 ppm), and calcium not in excess (<6,000 ppm).
Hemp rope was used in the age of sailing ships, though the rope had to be protected by tarring, since hemp rope has a propensity for breaking from rot, as the capillary effect of the rope-woven fibers tended to hold liquid at the interior, while seeming dry from the outside. Tarring was a labor-intensive process, and earned sailors the nickname "Jack Tar". Hemp rope was phased out when Manila, which does not require tarring, became widely available. Manila is sometimes referred to as Manila hemp, but is not related to hemp; it is abacá, a species of banana.