Marijuana has in fact been grown for medicinal research in North America by both the Canadian (Fig. 40) and American governments, and this will likely continue. The possibility of marijuana becoming a legal commercial crop in North America is, to say the least, unlikely in the foreseeable future. Nevertheless the private sector is currently producing medicinal marijuana in Europe and Canada, so the following orientation to marijuana as a potential authorized crop is not merely academic.

I can’t disagree more with attacking “Big Pharma” or Trump with regards to fixing this problem! Screw the political affiliations for now, let’s change the whole Schedule 1 nightmare. We’re steeped in technology and we have insanely archaic drug laws. Worse, our gov then pressures the countries we give money to (which is all of them) to follow suit by adopting our effed up way. Schedule 1 needs to be dismantled. The research can’t be done on anything listed with very few exceptions. There’s other Sched.1 drugs that need to be available for research by legitimate people, there’s lots of exciting research in psychedelics that’s stalled by archaic laws. That part might just require big pharma to help.

Cannabis (also called pot, marijuana, weed, dope, grass, mull, dak, hash, smoke, buds, skunk, cabbage, ganja, reefer) is the most commonly used illegal drug in New Zealand. Cannabis comes from the Cannabis Sativa plant and is used both for recreational and medicinal purposes. As a recreational drug, it can be used in a dried plant, resin, or oil form. The potency of cannabis depends on it's concentration of THC, which is higher in resin and oil than in the dried plant. The psychoactive potency of cannabis depends on its concentration of THC, which is higher in resin and hash oil. Cannabis is widely available in New Zealand.
The etymology is uncertain but there appears to be no common Proto-Indo-European source for the various forms of the word; the Greek term kánnabis is the oldest attested form, which may have been borrowed from an earlier Scythian or Thracian word.[9][10] Then it appears to have been borrowed into Latin, and separately into Slavic and from there into Baltic, Finnish, and Germanic languages.[11] Following Grimm's law, the "k" would have changed to "h" with the first Germanic sound shift,[9][12] after which it may have been adapted into the Old English form, hænep. However, this theory assumes that hemp was not widely spread among different societies until after it was already being used as a psychoactive drug, which Adams and Mallory (1997) believe to be unlikely based on archaeological evidence.[9] Barber (1991) however, argued that the spread of the name "kannabis" was due to its historically more recent drug use, starting from the south, around Iran, whereas non-THC varieties of hemp are older and prehistoric.[11] Another possible source of origin is Assyrian qunnabu, which was the name for a source of oil, fiber, and medicine in the 1st millennium BC.[11]

The downsides of graphene are its dwindling sources and costly process to mine and import from rural areas in China and India. Hemp, however, can be grown in almost any terrain or country, and produces hemp bast, the key material used to replace graphene, as a waste byproduct of hemp processing. According to Mitlin’s research, hemp processing is 1,000 times cheaper than graphene processing.


The opportunity to grow a new specialty oilseed crop in Kansas offers potential for diversification for Kansas farmers looking for an alternative crop, or for new farming enterprises interested in cultivating industrial hemp. The Kansas agriculture industry has developed a statewide strategic growth plan in recent years, and is committed to pursuing new and innovative opportunities to grow agriculture. The research generated by participants of this new industrial hemp program will be valuable data in identifying the growth potential offered in this sector.

Heavy, long term exposure to marijuana may have biologically-based physical, mental, behavioral and social health consequences and may be "associated with diseases of the liver (particularly with co-existing hepatitis C), lungs, heart, and vasculature".[79] It is recommended that cannabis use be stopped before and during pregnancy as it can result in negative outcomes for both the mother and baby.[80][81] However, maternal use of marijuana during pregnancy does not appear to be associated with low birth weight or early delivery after controlling for tobacco use and other confounding factors.[82] A 2014 review found that while cannabis use may be less harmful than alcohol use, the recommendation to substitute it for problematic drinking is premature without further study.[83] Other side effects include cannabinoid hyperemesis syndrome.[84]

In 1951, Congress passed the Boggs Act, which for the first time included Cannabis with narcotic drugs. In 1970, with the passage of the Controlled Substances Act, marijuana was classified by Congress as a Schedule I drug. Drugs in Schedule I are distinguished as having no currently accepted medicinal use in the United States. Other Schedule I substances include heroin, LSD, mescaline, and methaqualone.
Spring Hope, NC, Nov. 13, 2018 (GLOBE NEWSWIRE) -- via NEWMEDIAWIRE -- Hemp, Inc. (OTC PINK: HEMP), a global leader in the industrial hemp industry with bi-coastal processing centers including the largest multipurpose industrial hemp processing facility in the western hemisphere (in Spring Hope, North Carolina), announced today that the company is one of the largest sponsors for the 4th Annual Jack Herer Cup on November 15, 2018. At the event, Hemp, Inc. CEO Bruce Perlowin will receive an award for being a trailblazer in the hemp industry. To learn more about the 4th Annual Jack Herer Cup or to RSVP, click here.
The manufacturer will probably give you a recommended dosage, but bear in mind that this isn’t set in stone. What you need to find is your own minimum effective dose. “Minimum effective dose” is a medical term which refers to the amount of a substance you need for the results you want, and above which, the substance doesn’t increase in effectiveness.
Spring Hope, NC, Nov. 13, 2018 (GLOBE NEWSWIRE) -- via NEWMEDIAWIRE -- Hemp, Inc. (OTC PINK: HEMP), a global leader in the industrial hemp industry with bi-coastal processing centers including the largest multipurpose industrial hemp processing facility in the western hemisphere (in Spring Hope, North Carolina), announced today that the company is one of the largest sponsors for the 4th Annual Jack Herer Cup on November 15, 2018. At the event, Hemp, Inc. CEO Bruce Perlowin will receive an award for being a trailblazer in the hemp industry. To learn more about the 4th Annual Jack Herer Cup or to RSVP, click here.
Salve, scusate la domanda banale. La titolazione al 10% indica 1000 mg. Questo vuole indicare che in ogni goccia ci sono 1000 mg di CBD? Io soffro di dolore cronico, fibromialgia, colon irritabile. Voglio acquistare la titolazione alta ma non comprendo perfettamente il dosaggio. Sulla base della vostra tabella patologia/dosaggio ho letto di usare 20 mg per circa 25 giorni..ma non capisco a questo punto come regolarmi. Mi sapreste indicare voi in gocce come devo utilizzarlo? Grazie
A wide variety of hemp clothing, footwear, and food products are now available in North America. Some American manufacturers and distributors have chosen to exploit the association of hemp products with marijuana in their advertising. Such marketing is unfortunate, sending the message that some in the industry are indifferent to the negative image that this generates in the minds of much of the potential consuming public. Admittedly, such advertising works. But marketing based on the healthful and tasteful properties of hemp food products, the durable nature of hemp textiles, and the environmental advantages of the crop has proven to be widely acceptable, and is likely to promote the long term development of hemp industries.
There are many varieties of cannabis infusions owing to the variety of non-volatile solvents used.[179] The plant material is mixed with the solvent and then pressed and filtered to express the oils of the plant into the solvent. Examples of solvents used in this process are cocoa butter, dairy butter, cooking oil, glycerine, and skin moisturizers. Depending on the solvent, these may be used in cannabis foods or applied topically.[180]

Australia's National Cannabis Prevention and Information Centre (NCPIC) states that the buds (flowers) of the female cannabis plant contain the highest concentration of THC, followed by the leaves. The stalks and seeds have "much lower THC levels".[152] The UN states that leaves can contain ten times less THC than the buds, and the stalks one hundred times less THC.[149]
In the past few years, just such a cure has seemingly presented itself. Amid the less common remedies that can be found on the internet—special diets, meditation, biofeedback, surgical implants—a new product has recently gained prominence: CBD oil (sometimes known simply as “hemp oil”), so named for its chief chemical compound, cannabidiol, which occurs naturally in cannabis plants. In online forums and news articles, CBD has been hailed as a new frontier in epilepsy treatment, with parents testifying that it managed to stop their children’s seizures when nothing else could.
"CBD increases the circulating levels of your natural endocannabinoids, which, in turn, interact with your cannabinoid receptors," Bonn-Miller says. "CBD has also been shown to interact with serotonin receptors, and that may be part of why it has some beneficial effects on anxiety. It also interacts with some pain receptors, which may be why we're starting to see effects on pain and inflammation."
Cohen has found that chronic conditions including autoimmune diseases and pain syndromes can be helped with a 6-mg under-the-tongue tincture (the fastest delivery system) or a 25-mg capsule taken twice a day. Dosages for topical products like lotions are especially hard to determine—there’s no clarity on how much CBD gets into the system through the skin.
The leaves have a peculiar and diagnostic venation pattern that enables persons poorly familiar with the plant to distinguish a cannabis leaf from unrelated species that have confusingly similar leaves (see illustration). As is common in serrated leaves, each serration has a central vein extending to its tip. However, the serration vein originates from lower down the central vein of the leaflet, typically opposite to the position of, not the first notch down, but the next notch. This means that on its way from the midrib of the leaflet to the point of the serration, the vein serving the tip of the serration passes close by the intervening notch. Sometimes the vein will actually pass tangent to the notch, but often it will pass by at a small distance, and when that happens a spur vein (occasionally a pair of such spur veins) branches off and joins the leaf margin at the deepest point of the notch. This venation pattern varies slightly among varieties, but in general it enables one to tell Cannabis leaves from superficially similar leaves without difficulty and without special equipment. Tiny samples of Cannabis plants also can be identified with precision by microscopic examination of leaf cells and similar features, but that requires special expertise and equipment.[11]
Industrial hemp is a versatile agricultural plant which could one day be a valuable crop option for Pennsylvania farmers. The Commonwealth of Pennsylvania has taken some important steps toward making that a reality. Following Governor Wolf’s signing of the Industrial Hemp Research Act, Number 92 in 2016, the Pennsylvania Department of Agriculture’s Industrial Hemp Research Pilot Program started issuing permits for research & growth of industrial hemp in 2017. Pennsylvania’s industrial hemp legislation was sparked by the passage of the 2014 Farm Bill, which gave federal permission for institutions of higher education or state Departments of Agriculture to research the cultivation and marketing of industrial hemp. As part of Pennsylvania’s Research Pilot Program, industrial hemp was legally grown in the Commonwealth after an 80 years hiatus. The Department of Agriculture has issued 35 research permits in the last two years to institutions of higher education and to farmers, business or individuals in contract with the Department to participate in the research of industrial hemp cultivation and marketing in Pennsylvania. In 2018, 35 research permits were issued to researchers, who cultivated industrial hemp in 25 Pennsylvania counties. 
For kids with severe forms of epilepsy, changes in medication levels can be extremely dangerous. “If their levels go low, they’re at increased risk of seizures, which could lead to an emergency room visit or an ICU stay,” Knupp said. “On the other hand, if their levels go high, their side effects can increase dramatically.” Side effects from epilepsy medications can range anywhere from drowsiness to vomiting to heart arrhythmia, Knupp noted. “For some people that could mean a minor inconvenience, but for some patients it could be life-threatening.”
CBD is a 5-HT1A receptor agonist, which may also contribute to an anxiolytic effect.[146] This likely means the high concentrations of CBD found in Cannabis indica mitigate the anxiogenic effect of THC significantly.[146] The cannabis industry claims that sativa strains provide a more stimulating psychoactive high while indica strains are more sedating with a body high.[147] However this is disputed by researchers.[148]

It’s a truism to state that pain is an inevitable part of life. And it’s true that we all, from time to time, experience pain that is short-lived and treatable. But those who deal with chronic pain know the debilitating, life-sucking reality of this condition. And traditional medications often come with long lists of side effects which can be as debilitating as the pain itself.


In 2013, BMW announced its newest electric car, the i3. Using low-weight hemp in its interior, the i3 weighs 800 pounds less than its market competitors. The Kestrel, created by Canadian Motive Industries, uses polymer resin-infused hemp stalks to replace fiberglass in the body of the vehicle. From this replacement, consumers can expect a dramatic reduction in weight, improved efficiency and the appeal of an ecologically sustainable vehicle.

Given its name, you might assume THCV shares psychoactive powers with its potent counterpart, THC. In reality, this cannabinoid is more like a cross between CBD and THC. From the former, it takes its modulating powers. Acting like THC “lite,” THCV like CBD can dampen the effects of a strong high. Yet at higher doses, THCV kicks into a psychoactive stimulant in its own right.


APPLICATIONS ARE NOW AVAILABLE for the 2019 Industrial Hemp Research Pilot Program. You can access the Grower Application Packet, the Processor/Handler Application Packet, and the University/College Affiliation Application Packet on the Program Page titled "Applications for the Hemp Program" in the right side bar (or scroll further down on mobile devices) or through the green link in the description below. Complete instructions and guidelines for applicants are contained in the application packets. Grower applications are due November 30, 2018 at 4:30 PM Eastern Time.
The confusion compounds when one realizes that in today’s popular lexicon, the terms indica, sativa, and hybrid tend to indicate a set of effects, rather than the taxonomy of a particular strain. But that’s just as well. Most marijuana strains today, especially those under commercial cultivation, are genetic hybrids. Only a handful of pure, or “landrace” cannabis strains are in circulation.
“Geotextiles” or “agricultural textiles” include (1) ground-retaining, biodegradable matting designed to prevent soil erosion, especially to stabilize new plantings while they develop root systems along steep highway banks to prevent soil slippage (Fig. 32); and (2) ground-covers designed to reduce weeds in planting beds (in the manner of plastic mulch). At present the main materials used are polymeric (polythene, spun-blown polypropylene) and some glass fiber and natural fibers. Both woven and non-woven fibers can be applied to geotextiles; woven and knitted materials are stronger and the open structure may be advantageous (e.g. in allowing plants to grow through), but non-wovens are cheaper and better at suppressing weeds. Flax and hemp fibers exposed to water and soil have been claimed to disintegrate rapidly over the course of a few months, which would make them unacceptable for products that need to have long-term stability when exposed to water and oil. Coco (coir) fiber has been said to be much more suitable, due to higher lignin content (40%–50%, compared to 2%–5% in bast fibers); these are much cheaper than flax and hemp fibers (Karus et al. 2000). However, this analysis does not do justice to the developing hemp geotextile market. Production of hemp erosion control mats is continuing in both Europe and Canada. Given the reputation for rot resistance of hemp canvas and rope, it seems probable that ground matting is a legitimate use. Moreover, the ability to last outdoors for many years is frequently undesirable in geotextiles. For example, the widespread current use of plastic netting to reinforce grass sod is quite objectionable, the plastic persisting for many years and interfering with lawn care. Related to geotextile applications is the possibility of using hemp fiber as a planting substrate (biodegradable pots and blocks for plants), and as biodegradable twine to replace plastic ties used to attach plants to supporting poles. Still another consideration is the “green ideal” of producing locally for local needs; by this credo, hemp is preferable in temperate regions to the use of tropical fibers, which need to be imported.
Nevertheless, every bit of this ancient plant is useful and valuable, and not just for rope, but for textiles, auto parts, cosmetics, dynamite, supplements, food, and medicine. In ancient China, hemp seed was regarded as food for the lower classes, and in Europe, a peanut butter-like spread was made from the seeds, in both cases with the hulls intact.

Public heath insurance programs would be required to cover medical marijuana in New York if a new Assembly bill is enacted. “Cost is the primary barrier to patient access in New York’s medical marijuana program,” reads a memo attached to the legislation. “Medicaid, other public health plans, and commercial health insurance plans do not cover … Continue reading New York Bill Would Require Medical Marijuana Be Covered By Public Health Insurance
Marijuana regulators in Washington State will entertain sweeping changes to how marijuana is tested, processed, packaged and sold in one of the U.S.’s oldest recreational marijuana markets, officials announced late Wednesday. Recreational cannabis has been sold in regulated retail outlets in Washington since 2014. Consumers there pay one of the country’s highest tax burdens, generating … Continue reading Washington State Prepares To Rewrite Marijuana Testing And Packaging Rules
Known for invigorating and uplifting sensations, with a high focus in the mind rather than the body, sativas are extremely popular as daytime-use strains and for social occasions. Sativas are also widely associated with the cerebral and creativity-enhancing effects of weed. Hence, they are lauded by artists and other inventive people who use cannabis.
The scientific debate regarding taxonomy has had little effect on the terminology in widespread use among cultivators and users of drug-type Cannabis. Cannabis aficionados recognize three distinct types based on such factors as morphology, native range, aroma, and subjective psychoactive characteristics. Sativa is the most widespread variety, which is usually tall, laxly branched, and found in warm lowland regions. Indica designates shorter, bushier plants adapted to cooler climates and highland environments. Ruderalis is the informal name for the short plants that grow wild in Europe and Central Asia.

CBD Oil

×