Fiberboard. In North America the use of nonwood fibers in sheet fiberboard (“pressboard” or “composite board”) products is relatively undeveloped. Flax, jute, kenaf, hemp, and wheat straw can be used to make composite board. Wheat straw is the dominant nonwood fiber in such applications. Although it might seem that hemp bast fibers are desirable in composite wood products because of their length and strength, in fact the short fibers of the hurds have been found to produce a superior product (K. Domier, pers. commun.). Experimental production of hemp fiberboard has produced extremely strong material (Fig. 22). The economic viability of such remains to be tested. Molded fiberboard products are commercially viable in Europe (Fig. 23), but their potential in North America remains to be determined.
The public forum sessions provided an overview of the Alternative Crop Research Act, including the legal parameters set within the bill, and the procedures that will guide development of the rules and regulations. Guest speakers included Brent Burchett, the director of the plant division from the Kentucky Department of Agriculture, and Mitch Yergert, retired director of the division of plant industry from the Colorado State Department of Agriculture.
The woody core (hurds, sometimes called shives) of hemp makes remarkably good animal bedding (Fig. 28, 29). The hurds are sometimes molded into small pellets for bedding applications (Fig. 30). Such appears to be unsurpassed for horse bedding, and also make an excellent litter for cats and other pets (Fig. 31). The hurds can absorb up to five times their weight in moisture (typically 50% higher than wood shavings), do not produce dust (following initial dust removal), and are easily composted. Hemp bedding is especially suited to horses allergic to straw. In Europe, the animal bedding market is not considered important (Karus et al. 2000), but in North America there are insufficient hemp hurds available to meet market demand.
There’s also been a lot of talk lately about “microdosing” CBD. This refers to an incremental process of finding your minimum effective dose. You can do this with any concentration of CBD oil, but lower concentrations will take longer. In a 2017 article in Rolling Stone, Dr. Dustan Sulak outlines his protocol for microdosing. You can begin this process by asking yourself three questions:
Industrial hemp is from the plant species Cannabis sativa and has been used worldwide to produce a variety of industrial and consumer products. Hemp is a source of fiber and oilseed grown in more than 30 nations. In the United States production is controlled under drug enforcement laws. To produce industrial hemp in the United States the grower must obtain a permit from the Drug Enforcement Agency (DEA).
George Washington’s initial interest in hemp was as a cash crop. After deciding not to cultivate it as a cash crop, Washington grew it to meet the needs of his own plantation. Hemp was used at Mount Vernon for rope, thread for sewing sacks, canvas, and for repairing the seine nets used at the fisheries. Washington’s diaries and farm reports indicate that hemp grew at all five farms which made up Mount Vernon, (Mansion House, River Farm, Dogue Run Farm, Muddy Hole Farm, and Union Farm).
Hemp production has been legalized in North Carolina, but only as part of the state's pilot program as allowed under federal law. As such, it will still be awhile before the first fields are planted. The N.C. General Assembly passed Senate Bill 313 in 2015, allowing the Industrial Hemp Commission to develop the rules and licensing structure necessary to stay within federal laws. The law was modified in 2016 in House Bill 992. The Industrial Hemp Commission adopted temporary rules for review in February 2017. The Rules Review Commission of the Office of Administrative Hearings voted to approve these rules Feb. 16.
Cannabis for industrial uses is valuable in tens of thousands of commercial products, especially as fibre ranging from paper, cordage, construction material and textiles in general, to clothing. Hemp is stronger and longer-lasting than cotton. It also is a useful source of foodstuffs (hemp milk, hemp seed, hemp oil) and biofuels. Hemp has been used by many civilizations, from China to Europe (and later North America) during the last 12,000 years. In modern times novel applications and improvements have been explored with modest commercial success.
Indeed, hemp oil products have grown out of a market largely devoid of regulations or safety protocols. The state of the CBD industry harks back to the age of elixirs and potions hawked from covered wagons to the awed denizens of pioneer towns. There are no industrywide standards in place to ensure that CBD oils are consistently formulated batch-to-batch. There is no regulatory body screening products for pesticides, heavy metals, solvent residues, and other dangerous contaminants. The laboratories that companies contract to test their CBD products are themselves neither standardized nor consistently regulated. No medical research exists to recommend how much CBD a patient should take, nor is there detailed, reliable documentation of how CBD interacts with most epilepsy medications.
Hi Lauren I've just started today with 250mg cbd oil. I'm starting low to see what happens. I've nerve damage across buttocks from a laminectomy. I've not been able to sit for 5 years. I've recently started with a muscle spasm in my left buttock and the muscle above is painful. It is only the first day, also tried a cbd night time tea as well. Do change in muscle pain so tight on my left hand side. How long before felt it starting to work please. I'm trying not to expect changes straightaway. I also take 1100mg gabapentin and 30mg amitriptyline and I hate both of them - they both can cause muscle tightness affecting the nerve. Thank you Lyn
And now, onto the thorny issue of legality. The simple answer to the question is yes – if it is extracted from hemp. The 2014 Farm Bill established guidelines for growing hemp in the U.S. legally. This so-called “industrial hemp” refers to both hemp and hemp products which come from cannabis plants with less than 0.3 percent THC and are grown by a state-licensed farmer.
Locsta....I share your pain of degenerative and bulging disk disease, along with fibromyalgia, chronic fatigue and arthritis. Absolutely no energy and chronic pain all day, every day. I'm curious as to what type and brand of the CBD oil you are taking and for how long have you been using it? I've been researching CBD oil for months and am quite confused!
There are practical, if cruder alternatives to separate the long fiber for high-quality textile production, but in fact such techniques are used mostly for non-textile applications. This involves production of “whole fibers” (i.e. harvesting both the long fibers from the cortex and the shorter fibers from throughout the stem), and technologies that utilize shortened hemp fibers. This approach is currently dominant in western Europe and Canada, and commences with field dew retting (typically 2–3 weeks). A principal limitation is climatic—the local environment should be suitably but not excessively moist at the close of the harvest season. Once stalks are retted, dried, and baled, they are processed to extract the fiber. In traditional hemp processing, the long fiber was separated from the internal woody hurds in two steps, breaking (stalks were crushed under rollers that broke the woody core into short pieces, some of which were separated) and scutching (the remaining hurds, short fibers (“tow”) and long fibers (“line fiber, ” “long-line fiber”) were separated). A single, relatively expensive machine called a decorticator can do these two steps as one. In general in the EU and Canada, fibers are not separated into tow and line fibers, but are left as “whole fiber.” In western Europe, the fiber is often “cottonized,” i.e. chopped into short segments the size of cotton and flax fiber, so that the fibers can be processed on flax processing machinery, which is very much better developed than such machinery is for hemp. In North America the use of hemp for production of even crude textiles is marginal. Accordingly, the chief current fiber usages of North American, indeed of European hemp, are non-textile.
Hemp is plagued by bird predation, which take a heavy toll on seed production. The seeds are well known to provide extremely nutritious food for both wild birds and domestic fowl. Hunters and birdwatchers who discover wild patches of hemp often keep this information secret, knowing that the area will be a magnet for birds in the fall when seed maturation occurs. Increasingly in North America, plants are being established to provide habitat and food for wildlife. Hemp is not an aggressive weed, and certainly has great potential for being used as a wildlife plant. Of course, current conditions forbid such usage in North America.
Though use of marijuana among Washington state youth has remained relatively stable over the last several years (see Healthy Youth Survey), youth perception of harm from use of marijuana has been steadily decreasing (meaning: fewer adolescents believe marijuana use is harmful). Marijuana is the second most-commonly used substance among 12th graders (alcohol is the first), with 27% of high school seniors reporting current (past 30-day) use.
Cultivated in at least 30 countries, monikers for the hemp plant often allude to its origin or use, such as Manila hemp (abacá, Musa textilis), sisal hemp (Agave sisalana), Indian hemp (Apocynumcannabinum) and New Zealand hemp (Phormiumtenax). Worldwide, hemp seed production alone has soared from around 33,000 metric tons in the late ’90s to more than 100,000 metric tons annually between 2005 and 2011.
Although marijuana smoke contains a number of carcinogens findings from a limited number of well-designed studies do not suggest an increased risk for the development of either lung or upper airway cancer from light or moderate use. However, the evidence is mixed when it comes to the carcinogenic risks of heavy, long-term marijuana users, according to this study.
Despite advanced analytical techniques, much of the cannabis used recreationally is inaccurately classified. One laboratory at the University of British Columbia found that Jamaican Lamb’s Bread, claimed to be 100% sativa, was in fact almost 100% indica (the opposite strain). Legalization of cannabis in Canada (as of October 17, 2018) may help spur private-sector research, especially in terms of diversification of strains. It should also improve classification accuracy for cannabis used recreationally. Legalization coupled with Canadian government (Health Canada) oversight of production and labelling will likely result in more -- and more accurate -- testing to determine exact strains and content. Furthermore, the rise of craft cannabis growers in Canada should ensure quality, experimentation/research, and diversification of strains among private-sector producers.
Cannabinoids are a class of compounds that interact with receptors throughout your body. CBD is just one of dozens of cannabinoids found in cannabis, including tetrahydrocannabinol (THC), which is the one responsible for marijuana’s famous high. Medical cannabis is technically any cannabis product used for medicinal purposes, and these can contain THC or CBD or both, said Nick Jikomes, a neuroscientist at Leafly, a website that provides information about legal cannabis. “A common mistake people make is to think that CBD is ‘the medical cannabinoid’ and THC is ‘the recreational cannabinoid.’” That’s inaccurate, he said, because THC is a potent anti-inflammatory and can be helpful for pain.
Cannabis (/ˈkænəbɪs/) is a genus of flowering plants in the family Cannabaceae. The number of species within the genus is disputed. Three species may be recognized: Cannabis sativa, Cannabis indica, and Cannabis ruderalis; C. ruderalis may be included within C. sativa; or all three may be treated as subspecies of a single species, C. sativa. The genus is widely accepted as being indigenous to and originating from Central Asia, with some researchers also including upper South Asia in its origin.
Short-term use increases both minor and major adverse effects. Common side effects include dizziness, feeling tired, vomiting, and hallucinations. Long-term effects of cannabis are not clear. Concerns including memory and cognition problems, risk of addiction, schizophrenia in young people, and the risk of children taking it by accident.
In 1937, the Marijuana Tax Act strictly regulated the cultivation and sale of all cannabis varieties. The Controlled Substances Act of 1970 classified all forms of cannabis — including hemp — as a Schedule I drug, making it illegal to grow it in the United States (which is why we’re forced to import hemp from other countries as long as it contains scant levels of THC — 0.3% is the regulation for hemp cultivation in the European Union and Canada). As a result of this long-term prohibition, most people have forgotten the industrial uses of the plant and continue to misidentify hemp with its cannabis cousin, marijuana.
I am currently going through red skin syndrome/topical steroid withdrawal. The only cure as of now is time(6 months to 3 years) and waiting out horrible eczema-like flares. My main issue is burning/tingling skin that is almost constant. Steroids close off blood vessels and when you stop them they 'wake' up causing this nerve discomfort/pain. I've been smoking medical cannabis for the duration of my recovery(1.5 years) and It's done wonders except that the flare is around my mouth and I'm afraid the smoking is causing more issues.. as well as helping. I need to step up my game and take a different approach. I am wondering how to go about using cbd but I don't know where to start and was wondering if you could help. Thank you
Jump up ^ El-Alfy, Abir T.; Ivey, Kelly; Robinson, Keisha; Ahmed, Safwat; Radwan, Mohamed; Slade, Desmond; Khan, Ikhlas; Elsohly, Mahmoud; Ross, Samir (2010). "Antidepressant-like effect of Δ9-tetrahydrocannabinol and other cannabinoids isolated from Cannabis sativa L". Pharmacology Biochemistry and Behavior. 95 (4): 573–82. doi:10.1016/j.pbb.2010.03.004. PMC 2866040. PMID 20332000.
One of the most significant developments for the North American hemp industry was investment in hemp products by Anita and Gordon Roddick, founders of The Body Shop, a well known international chain of hair and body care retailers. This was a rather courageous and principled move that required overcoming American legal obstacles related to THC content. The Body Shop now markets an impressive array of hemp nutraceutical cosmetics (Fig. 39), and this has given the industry considerable credibility. The Body Shop has reported gross sales of about a billion dollars annually, and that about 4% of sales in 2000 were hemp products.
Thank you for sharing your story. It is amazing the stories I have heard and the things you here the politicians debating over. The truth is out. They need to get over there guilty pride and pharmaceutical needs to be slapped down a few pegs. This is happening we just need to defend the corporations that back the oil, the pharma, any other corporation that doesn’t fight a health and balance model.
“Geotextiles” or “agricultural textiles” include (1) ground-retaining, biodegradable matting designed to prevent soil erosion, especially to stabilize new plantings while they develop root systems along steep highway banks to prevent soil slippage (Fig. 32); and (2) ground-covers designed to reduce weeds in planting beds (in the manner of plastic mulch). At present the main materials used are polymeric (polythene, spun-blown polypropylene) and some glass fiber and natural fibers. Both woven and non-woven fibers can be applied to geotextiles; woven and knitted materials are stronger and the open structure may be advantageous (e.g. in allowing plants to grow through), but non-wovens are cheaper and better at suppressing weeds. Flax and hemp fibers exposed to water and soil have been claimed to disintegrate rapidly over the course of a few months, which would make them unacceptable for products that need to have long-term stability when exposed to water and oil. Coco (coir) fiber has been said to be much more suitable, due to higher lignin content (40%–50%, compared to 2%–5% in bast fibers); these are much cheaper than flax and hemp fibers (Karus et al. 2000). However, this analysis does not do justice to the developing hemp geotextile market. Production of hemp erosion control mats is continuing in both Europe and Canada. Given the reputation for rot resistance of hemp canvas and rope, it seems probable that ground matting is a legitimate use. Moreover, the ability to last outdoors for many years is frequently undesirable in geotextiles. For example, the widespread current use of plastic netting to reinforce grass sod is quite objectionable, the plastic persisting for many years and interfering with lawn care. Related to geotextile applications is the possibility of using hemp fiber as a planting substrate (biodegradable pots and blocks for plants), and as biodegradable twine to replace plastic ties used to attach plants to supporting poles. Still another consideration is the “green ideal” of producing locally for local needs; by this credo, hemp is preferable in temperate regions to the use of tropical fibers, which need to be imported.
Support for legalization has steadily grown over the last several years. Today, medical marijuana is legal in 23 states and the District of Columbia. And even federal officials have begun to soften their stances. Last fall, outgoing Attorney General Eric Holder signaled his support for removing marijuana from the list of Schedule I narcotics. “I think it’s certainly a question we need to ask ourselves, whether or not marijuana is as serious of a drug as heroin,” Holder said. This summer, Chuck Rosenberg, the acting administrator of the U.S. Drug Enforcement Administration, acknowledged that marijuana is not as dangerous as other Schedule I drugs and announced his agents would not be prioritizing marijuana enforcement. Still, as long as marijuana remains illegal under federal law, the haphazard system in which it is studied, produced, and distributed will remain, and Americans will not be able to take full advantage of its medicinal properties.
"Skunk" refers to several named strains of potent cannabis, grown through selective breeding and sometimes hydroponics. It is a cross-breed of Cannabis sativa and C. indica (although other strains of this mix exist in abundance). Skunk cannabis potency ranges usually from 6% to 15% and rarely as high as 20%. The average THC level in coffee shops in the Netherlands is about 18–19%.
Side effects of CBD include sleepiness, decreased appetite, diarrhea, fatigue, malaise, weakness, sleeping problems, and others. It does not have intoxicating effects like those caused by THC, and may have an opposing effect on disordered thinking and anxiety produced by THC. CBD has been found to interact with a variety of different biological targets, including cannabinoid receptors and other neurotransmitter receptors. The mechanism of action of CBD in terms of its psychoactive and therapeutic effects is not fully clear.
The CBD oil needs to be taken twice a day everyday. The dosage depends on symptoms and it takes 30 days to awken your natural cannabis system after you begin taking the oil. I personally use Hemp works CBD oil in the 750 strength and only need 5 drops sublingual 2 times daily and results are many. Problem with oil and alz.patients is getting them to hold oil under tongue for 60 seconds. We have just began to get my dad on it. He too is in a nursing home in the state of florida and they cannot deny him any medication my mom has requested that he receive. If she is not their they are supposed to administer and she will call them to make sure he gets it. He is not 30 days into dosing yet so I don't have any results to speak of. I do know that since he has started he has had no more bladder infection and has not fallen in 3 weeks. That's a record for him so we will continue to monitor. Best of luck to you and a lot is going to depend on the state your mom is in and what the state laws are concerning her rights or the rights of whom has her medical power of attorney