There are many varieties of cannabis infusions owing to the variety of non-volatile solvents used.[179] The plant material is mixed with the solvent and then pressed and filtered to express the oils of the plant into the solvent. Examples of solvents used in this process are cocoa butter, dairy butter, cooking oil, glycerine, and skin moisturizers. Depending on the solvent, these may be used in cannabis foods or applied topically.[180]
© Copyright 2018. Miji Media LLC. All Rights Reserved. These statements have not been evaluated by the Food and Drug Administration. The products mentioned on this site are not intended to diagnose, treat, cure or prevent any disease. As the consumer, it is your responsibility to know your local, state and federal laws before making any purchases. All products on this website are intended for legal use. Prior to purchasing a product(s) on this website, you should confirm legality of the product in the state where you request shipment.
As of November 2016, 28 states and the District of Columbia legally allow cannabis for personal medical use. Rules surrounding the use of medical cannabis (medical marijuana) vary by state. The first state in the union to legalize the medical use of marijuana was California in 1996. States that allow medical marijuana include: Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Hawaii, Illinois, Maine, Maryland, Massachusetts, Michigan, Minnesota, Montana, Nevada, New Hampshire, New Jersey, New Mexico, North Dakota, New York, Ohio, Oregon, Pennsylvania, Rhode Island, Vermont, Washington, and the District of Columbia. It is important to recognize that these state marijuana laws do not change the fact that using marijuana continues to be an offense under Federal law.
The link provides additional information that may be useful or interesting and has no aliation to the promotion, sale and distribution of Medical Marijuana Inc. products. The link does not constitute an endorsement of these organizations by Medical Marijuana Inc. and none should be inferred. Please view our full Terms Of Use Agreement for more information and the terms and conditions governing your use of this site.

Cannabidiol is currently a class B1 controlled drug in New Zealand under the Misuse of Drugs Act. It is also a prescription medicine under the Medicines Act. In 2017 the rules were changed so that anyone wanting to use it could go to the Health Ministry for approval. Prior to this, the only way to obtain a prescription was to seek the personal approval of the Minister of Health.

Essential (volatile) oil in hemp is quite different from hempseed oil. Examples of commercial essential oil product products are shown in Fig. 42. The essential oil is a mixture of volatile compounds, including monoterpenes, sesquiterpenes, and other terpenoid-like compounds that are manufactured in the same epidermal glands in which the resin of Cannabis is synthesized (Meier and Mediavilla 1998). Yields are very small—about 10 L/ha (Mediavilla and Steinemann 1997), so essential oil of C. sativa is expensive, and today is simply a novelty. Essential oil of different strains varies considerably in odor, and this may have economic importance in imparting a scent to cosmetics, shampoos, soaps, creams, oils, perfumes, and foodstuffs. Switzerland has been a center for the production of essential oil for the commercial market. Narcotic strains tend to be more attractive in odor than fiber strains, and because they produce much higher numbers of flowers than fiber strains, and the (female) floral parts provide most of the essential oil, narcotic strains are naturally adapted to essential oil production. Switzerland has permitted strains with higher THC content to be grown than is allowed in other parts of the world, giving the country an advantage with respect to the essential oil market. However, essential oil in the marketplace has often been produced from low-THC Cannabis, and the THC content of essential oil obtained by steam distillation can be quite low, producing a product satisfying the needs for very low THC levels in food and other commercial goods. The composition of extracted essential oil is quite different from the volatiles released around the fresh plant (particularly limonene and alpha-pinene), so that a pleasant odor of the living plant is not necessarily indicative of a pleasant-smelling essential oil. Essential oil has been produced in Canada by Gen-X Research Inc., Regina. The world market for hemp essential oil is very limited at present, and probably also has limited growth potential.
The term hemp is used to name the durable soft fiber from the Cannabis plant stem (stalk). Cannabis sativa cultivars are used for fibers due to their long stems; Sativa varieties may grow more than six metres tall. However, hemp can refer to any industrial or foodstuff product that is not intended for use as a drug. Many countries regulate limits for psychoactive compound (THC) concentrations in products labeled as hemp.

Fig. 2. Cannabis sativa. This superb composite plate by artist Elmer Smith, often reproduced at a very small scale and without explanation in marijuana books, is the best scientific illustration of the hemp plant ever prepared. 1. Flowering branch of male plant. 2. Flowering branch of female plant. 3. Seedling. 4. Leaflet. 5. Cluster of male flowers. 6. Female flower, enclosed by perigonal bract. 7. Mature fruit enclosed in perigonal bract. 8. Seed (achene), showing wide face. 9. Seed, showing narrow face. 10. Stalked secretory gland. 11. Top of sessile secretory gland. 12. Long section of cystolith hair (note calcium carbonate concretion at base). Reproduced with the permission of Harvard University, Cambridge, MA.
Everybody has different medical needs, because of this Medix CBD hemp oil tinctures are available in different dosages ranging from 100mg – 4,500mg per bottle. The reason for such a large difference in CBD concentrations between the lowest strength bottle and the highest strength bottle is because we offer a vast and wide selection of CBD hemp oil tinctures to meet the needs of people with different medical goals.
Since the beginning of the 20th century, most countries have enacted laws against the cultivation, possession or transfer of cannabis.[209] These laws have impacted adversely on cannabis cultivation for non-recreational purposes, but there are many regions where handling of cannabis is legal or licensed. Many jurisdictions have lessened the penalties for possession of small quantities of cannabis so that it is punished by confiscation and sometimes a fine, rather than imprisonment, focusing more on those who traffic the drug on the black market.
There are practical, if cruder alternatives to separate the long fiber for high-quality textile production, but in fact such techniques are used mostly for non-textile applications. This involves production of “whole fibers” (i.e. harvesting both the long fibers from the cortex and the shorter fibers from throughout the stem), and technologies that utilize shortened hemp fibers. This approach is currently dominant in western Europe and Canada, and commences with field dew retting (typically 2–3 weeks). A principal limitation is climatic—the local environment should be suitably but not excessively moist at the close of the harvest season. Once stalks are retted, dried, and baled, they are processed to extract the fiber. In traditional hemp processing, the long fiber was separated from the internal woody hurds in two steps, breaking (stalks were crushed under rollers that broke the woody core into short pieces, some of which were separated) and scutching (the remaining hurds, short fibers (“tow”) and long fibers (“line fiber, ” “long-line fiber”) were separated). A single, relatively expensive machine called a decorticator can do these two steps as one. In general in the EU and Canada, fibers are not separated into tow and line fibers, but are left as “whole fiber.” In western Europe, the fiber is often “cottonized,” i.e. chopped into short segments the size of cotton and flax fiber, so that the fibers can be processed on flax processing machinery, which is very much better developed than such machinery is for hemp. In North America the use of hemp for production of even crude textiles is marginal. Accordingly, the chief current fiber usages of North American, indeed of European hemp, are non-textile.
Some of the research focuses that were explored in 2018 were: comparison of various agronomic factors on industrial hemp (planting dates, tillage regimens, range of soil fertility, etc.); hemp variety comparison for suitability to PA growing conditions; study of the effectiveness of potential herbicide products; comparison of hemp’s capability for weed suppression to other crops; surveying hemp crops for presence of arthropod and disease pests; evaluation of hemp’s performance for phytoremediation and land reclamation; study of hemp seed oil processing and marketability; development of industrial hemp products (using grain, stalks and flowers); genetic selection for desired hemp variety characteristics; and evaluations of hemp as an animal feed ingredient (cattle).  
George Washington also imported the Indian Hemp plant from Asia, which was used for fiber and, by some growers, for intoxicating resin production. In a letter to William Pearce who managed the plants for him Washington says, "What was done with the Indian Hemp plant from last summer? It ought, all of it, to be sown again; that not only a stock of seed sufficient for my own purposes might have been raised, but to have disseminated seed to others; as it is more valuable than common hemp."[citation needed]
The United Kingdom and Germany resumed commercial production in the 1990s. British production is mostly used as bedding for horses; other uses are under development. Companies in Canada, the UK, the United States, and Germany, among many others, process hemp seed into a growing range of food products and cosmetics; many traditional growing countries still continue to produce textile-grade fibre.
The 2014 US Farm Bill allows states that have passed their own industrial hemp legislation to grow industrial hemp for purposes of research and development. Several states — including Kentucky, Colorado, and Oregon — are already conducting hemp pilot projects. Many other states are currently pursuing similar legislation and programs. After many years of prohibition, American farmers are finally reacquainting themselves with industrial hemp.

The most pressing need of the hemp industry in North America is for the breeding of more productive oilseed cultivars. At present, mainly European cultivars are available, of which very few are suitable for specialized oilseed production. More importantly, hempseed oil is not competitive, except in the novelty niche market, with the popular food oils. As argued above, to be competitive, hemp should produce approximately 2 t/ha; at present 1 t/ha is considered average to good production. Doubling the productive capacity of a conventional crop would normally be considered impossible, but it needs to be understood just how little hemp has been developed as an oilseed. There may not even be extant land races of the kind of hemp oilseed strains that were once grown in Russia, so that except for a very few very recent oilseed cultivars, there has been virtually no breeding of oilseed hemp. Contrarily, hemp has been selected for fiber to the point that some breeders consider its productivity in this respect has already been maximized. Fiber strains have been selected for low seed production, so that most hemp germplasm has certainly not been selected for oilseed characteristics. By contrast, drug varieties have been selected for very high yield of flowers, and accordingly produce very high yield of seeds. Drug varieties have been observed to produce more than a kilogram of seed per plant, so that a target yield of several tonnes per hectare is conceivable (Watson and Clarke 1997). Of course, the high THC in drug cultivars makes these a difficult source of germplasm. However, wild plants of C. sativa have naturally undergone selection for high seed productivity, and are a particularly important potential source of breeding germplasm.
Cannabinoids are a class of compounds that interact with receptors throughout your body. CBD is just one of dozens of cannabinoids found in cannabis, including tetrahydrocannabinol (THC), which is the one responsible for marijuana’s famous high. Medical cannabis is technically any cannabis product used for medicinal purposes, and these can contain THC or CBD or both, said Nick Jikomes, a neuroscientist at Leafly, a website that provides information about legal cannabis. “A common mistake people make is to think that CBD is ‘the medical cannabinoid’ and THC is ‘the recreational cannabinoid.’” That’s inaccurate, he said, because THC is a potent anti-inflammatory and can be helpful for pain.

Jump up ^ Klein C, Karanges E, Spiro A, Wong A, Spencer J, Huynh T, Gunasekaran N, Karl T, Long LE, Huang XF, Liu K, Arnold JC, McGregor IS (November 2011). "Cannabidiol potentiates Δ⁹-tetrahydrocannabinol (THC) behavioural effects and alters THC pharmacokinetics during acute and chronic treatment in adolescent rats". Psychopharmacology. 218 (2): 443–457. doi:10.1007/s00213-011-2342-0. PMID 21667074.
Hemp is not the same as marijuana. One really has nothing to do with the other. Hemp was made illegal back in the days when cotton was king in the south and southern cotton plantation owners did not want the competition. They lobbied for, and got a law against hemp being grown nationwide. It never had to do with drugs at that time, and still doesn’t. As always, money and government go hand in hand. Now, recently, South Carolina has legalized growing hemp again, which is the only state in 50 to do so. We will hope for more enlightened agri-business legislation across the nation, soon.

Jump up ^ Crean RD, Crane NA, Mason BJ (March 2011). "An evidence based review of acute and long-term effects of cannabis use on executive cognitive functions". Journal of Addiction Medicine. 5 (1): 1–8. doi:10.1097/ADM.0b013e31820c23fa. PMC 3037578. PMID 21321675. Cannabis appears to continue to exert impairing effects in executive functions even after 3 weeks of abstinence and beyond. While basic attentional and working memory abilities are largely restored, the most enduring and detectable deficits are seen in decision-making, concept formation and planning.

It was the seizures that tipped Penny off that something wasn’t right with Harper after she and her husband Dustin brought her home from the hospital as a newborn. Several months later, having tried a battery of epilepsy medications and still without a diagnosis, Penny and Dustin flew to Boston with Harper to see an expert in infant seizures. It was there they first heard of CDKL5. “This is the point where life changed significantly,” Penny said, “because now we had this diagnosis. You know, this abnormality in our family that we cannot fix.”
In 2014, I founded New Frontier Data, an analytics and business intelligence reporting group dedicated to the global cannabis industry, after more than 20 years in finance, industry analytics, intelligence reporting and emerging markets. As such, I have had the privilege of following hemp’s emergence and evolution. Half a decade later, this robust, environmentally friendly, low -cost-to-produce plant has become one of the most diversely applied and globally significant natural resources in the world. Here is a look at its applications across several mature industries:
The question of whether heteromorphic sex chromosomes are indeed present is most conveniently answered if such chromosomes were clearly visible in a karyotype. Cannabis was one of the first plant species to be karyotyped; however, this was in a period when karyotype preparation was primitive by modern standards (see History of Cytogenetics). Heteromorphic sex chromosomes were reported to occur in staminate individuals of dioecious "Kentucky" hemp, but were not found in pistillate individuals of the same variety. Dioecious "Kentucky" hemp was assumed to use an XY mechanism. Heterosomes were not observed in analyzed individuals of monoecious "Kentucky" hemp, nor in an unidentified German cultivar. These varieties were assumed to have sex chromosome composition XX.[31] According to other researchers, no modern karyotype of Cannabis had been published as of 1996.[32] Proponents of the XY system state that Y chromosome is slightly larger than the X, but difficult to differentiate cytologically.[33]
In November 2015, Uttarakhand became the first state of India to legalize the cultivation of hemp for industrial purposes.[223] Usage within the Hindu and Buddhist cultures of the Indian subcontinent is common, with many street vendors in India openly selling products infused with cannabis, and traditional medical practitioners in Sri Lanka selling products infused with cannabis for recreational purposes and well as for religious celebrations.[224] It was criminalized in the Indian subcontinent by the Dutch and then the British. India and Sri Lanka have allowed cannabis to be taken in the context of traditional culture for recreational/celebratory purposes and also for medicinal purposes.[224]
“Specialty pulp” is the most important component of the hemp industry of the EU, and is expected to remain its core market for the foreseeable future. The most important specialty pulp products made from hemp are cigarette paper (Fig. 16), bank notes, technical filters, and hygiene products. Other uses include art papers and tea bags. Several of these applications take advantage of hemp’s high tear and wet strength. This is considered to be a highly stable, high-priced niche market in Europe, where hemp has an 87% market share of the “specialty pulp” sector (Karus et al. 2000). In Europe, decortication/refining machines are available that can produce 10 t/hour of hemp fiber suitable for such pulp use. North American capacity for hemp pulp production and value-added processing is much more limited than that of Europe, and this industry is negligible in North America.
Environmental sex determination is known to occur in a variety of species.[38] Many researchers have suggested that sex in Cannabis is determined or strongly influenced by environmental factors.[26] Ainsworth reviews that treatment with auxin and ethylene have feminizing effects, and that treatment with cytokinins and gibberellins have masculinizing effects.[14] It has been reported that sex can be reversed in Cannabis using chemical treatment.[39] A PCR-based method for the detection of female-associated DNA polymorphisms by genotyping has been developed.[40]
CBD in any capacity, other than products obtained and approved by a UNMC study or in a drug product approved by the FDA, remain illegal in Nebraska. The Attorney General re-issued a statement today of the law which said "Cannabidiol has been and continues to be included in Nebraska's Uniform Controlled Substances Act's legal definition of 'marijuana'"

Short-term use of the drug impairs thinking and coordination. In long-term studies, teens who smoke marijuana have lower IQs later on, as well as structural differences in their brains, though scientists debate whether this is an effect of the drug or a result of habitual pot smokers seeking out less intellectually stimulating pursuits. A 2016 study on almost 300 students by the University of Montreal published in the journal Development and Psychopathology found that teens who start smoking around age 14 do worse on some cognitive tests by age 20 than non-smokers. They also have a higher school dropout rate. If they wait until age 17 to start, though, the smokers do not seem to have the same impairments, according to the study. 

"A CBD company may create a CBD oil, test it, and use the test results to create their label," Bonn-Miller says. "The problem is if they never test their product again, or they test it once a year, you have no idea whether each batch is the same as the first one that they used to create the label. The vast majority of companies are not using manufacturing standards that assure product consistency over time. Companies should be testing every batch they make and tossing batches that don't fall within the specs of their label."
Last year, the Hemp Industries Association (HIA) estimated the total retail value of all hemp products sold in the U.S. at $620 million. Sadly, all of the raw hemp materials were imported from other countries. (More on that later.) Hemp is an attractive rotation crop for farmers. As it grows, hemp breathes in CO2, detoxifies the soil, and prevents soil erosion. What’s left after harvest breaks down into the soil, providing valuable nutrients.

In recent years, hemp has been growing in popularity as a material used in shoes. Today you can find boots, athletic shoes, sandals, and dress shoes that are made with 100% hemp fiber, or textiles that blend hemp fibers with materials such as cotton, jute, virgin polyester, and recycled polyester. The strength of hemp fibers makes it an ideal material for shoes because it's durable. In addition, it's breathable and naturally antimicrobial, so it doesn't hold on to odors.[41] Because hemp can be grown sustainably, shoes, clothing, and accessories made with hemp are representative of the sustainable fashion movement.