In a follow-up, single-dose study involving 36 patients, it was reported that 10 mg doses of delta-9-THC produced analgesic effects during a 7-hour observation period that were comparable to 60 mg doses of codeine, and 20 mg doses of delta-9-THC induced effects equivalent to 120 mg doses of codeine.[51] Higher doses of THC were found to be more sedative than codeine.
Cannabis is indigenous to Central Asia and Indian subcontinent,[183] and its use for fabric and rope dates back to the Neolithic age in China and Japan.[184][185] It is unclear when cannabis first became known for its psychoactive properties; some scholars suggest that the ancient Indian drug soma, mentioned in the Vedas, was cannabis, although this theory is disputed.[186]
Every crop grown and every variety may be inspected and sampled by a TDA plant inspector prior to harvest. The grower should contact TDA 30 days prior to harvest for inspection. The license holder is responsible for paying all fees associated with the sample. Each sample is $150. Please keep in mind that the way you set up your production method, may influence the number of samples required to represent the amount of material being produced. Growing multiple varieties will also increase the sampling cost.
Even without changes at the federal level, there are steps that states could take on their own to make the CBD market safer. States with broad marijuana legality or CBD-only measures could mandate the calibration and regulation of testing labs, and use them to conduct safety testing. They could fund research into the benefits, dosing, and drug interactions of CBD through their public university systems. Medical boards could redouble efforts to educate physicians in what research exists regarding medical marijuana in all its incarnations, so that doctors are prepared to prescribe and manage these medications as they become available.
I suffer fr migraines. Currently having Botox injections every three months for the last three years. This has helped went fr 24 to 30 migraines a month to 6 to 8 , now I'm back up to 14 to 20 a month. My doctor thought CBD oil might help. I have also started having anxiety attacks for a year now. I'm really confused with the dosages. Any thoughts would b helpful
“Geotextiles” or “agricultural textiles” include (1) ground-retaining, biodegradable matting designed to prevent soil erosion, especially to stabilize new plantings while they develop root systems along steep highway banks to prevent soil slippage (Fig. 32); and (2) ground-covers designed to reduce weeds in planting beds (in the manner of plastic mulch). At present the main materials used are polymeric (polythene, spun-blown polypropylene) and some glass fiber and natural fibers. Both woven and non-woven fibers can be applied to geotextiles; woven and knitted materials are stronger and the open structure may be advantageous (e.g. in allowing plants to grow through), but non-wovens are cheaper and better at suppressing weeds. Flax and hemp fibers exposed to water and soil have been claimed to disintegrate rapidly over the course of a few months, which would make them unacceptable for products that need to have long-term stability when exposed to water and oil. Coco (coir) fiber has been said to be much more suitable, due to higher lignin content (40%–50%, compared to 2%–5% in bast fibers); these are much cheaper than flax and hemp fibers (Karus et al. 2000). However, this analysis does not do justice to the developing hemp geotextile market. Production of hemp erosion control mats is continuing in both Europe and Canada. Given the reputation for rot resistance of hemp canvas and rope, it seems probable that ground matting is a legitimate use. Moreover, the ability to last outdoors for many years is frequently undesirable in geotextiles. For example, the widespread current use of plastic netting to reinforce grass sod is quite objectionable, the plastic persisting for many years and interfering with lawn care. Related to geotextile applications is the possibility of using hemp fiber as a planting substrate (biodegradable pots and blocks for plants), and as biodegradable twine to replace plastic ties used to attach plants to supporting poles. Still another consideration is the “green ideal” of producing locally for local needs; by this credo, hemp is preferable in temperate regions to the use of tropical fibers, which need to be imported.
Medical cannabis, or medical marijuana, can refer to the use of cannabis and its cannabinoids to treat disease or improve symptoms; however, there is no single agreed-upon definition.[38][39] The rigorous scientific study of cannabis as a medicine has been hampered by production restrictions and other federal regulations.[40] There is limited evidence suggesting cannabis can be used to reduce nausea and vomiting during chemotherapy, to improve appetite in people with HIV/AIDS, and to treat chronic pain and muscle spasms.[41][42][43] Its use for other medical applications is insufficient for conclusions about safety or efficacy.

The high lipid-solubility of cannabinoids results in their persisting in the body for long periods of time.[131] Even after a single administration of THC, detectable levels of THC can be found in the body for weeks or longer (depending on the amount administered and the sensitivity of the assessment method).[131] A number of investigators have suggested that this is an important factor in marijuana's effects, perhaps because cannabinoids may accumulate in the body, particularly in the lipid membranes of neurons.[132]


Based on reviews, smoking or vaporizing CBD vape oil seems to have less effects when compared to other methods of administering CBD, such as tinctures, capsules and sprays. On the flip side, others argue that smoking or vaporizing has less drawbacks than taking CBD orally, since ingesting CBD orally could result in inconsistent absorption and a delayed effect.
Cannabis is used in three main forms: marijuana, hashish and hash oil. Marijuana is made from dried flowers and leaves of the cannabis plant. It is the least potent of all the cannabis products and is usually smoked or made into edible products like cookies or brownies (see Factsheet: Marijuana Edibles). Hashish is made from the resin (a secreted gum) of the cannabis plant. It is dried and pressed into small blocks and smoked. It can also be added to food and eaten. Hash oil, the most potent cannabis product, is a thick oil obtained from hashish. It is also smoked.
Today he sells numerous hemp-made items, from shoes to shirts, as well as a range of hemp-based health and medicinal products. After some productive networking at recent cannabis conventions, he's also in talks with Julian Marley to distribute his products around the country, and hopes to help bring a full-scale hemp festival — codename Hemp Hop — to New Orleans next year.
The high lipid-solubility of cannabinoids results in their persisting in the body for long periods of time.[131] Even after a single administration of THC, detectable levels of THC can be found in the body for weeks or longer (depending on the amount administered and the sensitivity of the assessment method).[131] A number of investigators have suggested that this is an important factor in marijuana's effects, perhaps because cannabinoids may accumulate in the body, particularly in the lipid membranes of neurons.[132]
Let's start with the most officially proven medical use of CBD. Earlier this year, the FDA approved the first-ever drug containing CBD, Epidiolex, to treat two rare forms of pediatric epilepsy. To get to that point, the drug's manufacturers had to do a whole lot of randomized, placebo-controlled trials on humans. They had to study how much children could take, what would happen in case of overdose, and any possible side effects that would occur.
Traditionally, hemp stalks would be water-retted first before the fibers were beaten off the inner hurd by hand, a process known as scutching. As mechanical technology evolved, separating the fiber from the core was accomplished by crushing rollers and brush rollers that would produce a nearly clean fiber. After the Marijuana Tax Act was implemented in 1938, the technology for separating the fibers from the core remained "frozen in time".
There is also considerable potential for other industries using hemp in the manner that the automobile industry has demonstrated is feasible. Of course, all other types of transportation vehicles from bicycles to airplanes might make use of such technology. Natural fibers have considerable advantages for use in conveyance (Karus et al. 2000): low density and weight reduction, favorable mechanical, acoustical, and processing properties (including low wear on tools), no splintering in accidents, occupational health benefits (compared to glass fibers), no off-gassing of toxic compounds, and price advantages. Additional types of composite using hemp in combination with other natural fibers, post-industrial plastics or other types of resins, are being used to produce non-woven matting for padding, sound insulation, and other applications.
In Japan, hemp was historically used as paper and a fiber crop. There is archaeological evidence cannabis was used for clothing and the seeds were eaten in Japan back to the Jōmon period (10,000 to 300 BC). Many Kimono designs portray hemp, or asa (Japanese: 麻), as a beautiful plant. In 1948, marijuana was restricted as a narcotic drug. The ban on marijuana imposed by the United States authorities was alien to Japanese culture, as the drug had never been widely used in Japan before. Though these laws against marijuana are some of the world's strictest, allowing five years imprisonment for possession of the drug, they exempt hemp growers, whose crop is used to make robes for Buddhist monks and loincloths for Sumo wrestlers. Because marijuana use in Japan has doubled in the past decade, these exemptions have recently been called into question.[143]
Fig. 11. Frequency histograms of THC concentration in germplasm collections. Left, collection of E. Small and D. Marcus; of the 167 accessions, 43% had THC levels >0.3%. Right, the collection of the Vavilov Institute, St. Petersburg; of the 278 accessions for which chemical analyses were reported in Anonymous (1975), about 55% had THC levels >0.3%.
The Cannabis plant has a history of medicinal use dating back thousands of years across many cultures.[110] The Yanghai Tombs, a vast ancient cemetery (54 000 m2) situated in the Turfan district of the Xinjiang Uyghur Autonomous Region in northwest China, have revealed the 2700-year-old grave of a shaman. He is thought to have belonged to the Jushi culture recorded in the area centuries later in the Hanshu, Chap 96B.[111] Near the head and foot of the shaman was a large leather basket and wooden bowl filled with 789g of cannabis, superbly preserved by climatic and burial conditions. An international team demonstrated that this material contained tetrahydrocannabinol, the psychoactive component of cannabis. The cannabis was presumably employed by this culture as a medicinal or psychoactive agent, or an aid to divination. This is the oldest documentation of cannabis as a pharmacologically active agent.[112]
Cannabis drug preparations have been employed medicinally in folk medicine since antiquity, and were extensively used in western medicine between the middle of the 19th century and World War II, particularly as a substitute for opiates (Mikuriya 1969). A bottle of commercial medicinal extract is shown in Fig. 41. Medical use declined with the introduction of synthetic analgesics and sedatives, and there is very limited authorized medical use today, but considerable unauthorized use, including so-called “compassion clubs” dispensing marijuana to gravely ill people, which has led to a momentous societal and scientific debate regarding the wisdom of employing cannabis drugs medically, given the illicit status. There is anecdotal evidence that cannabis drugs are useful for: alleviating nausea, vomiting, and anorexia following radiation therapy and chemotherapy; as an appetite stimulant for AIDS patients; for relieving the tremors of multiple sclerosis and epilepsy; and for pain relief, glaucoma, asthma, and other ailments [see Mechoulam and Hanus (1997) for an authoritative medical review, and Pate (1995) for a guide to the medical literature]. To date, governmental authorities in the US, on the advice of medical experts, have consistently rejected the authorization of medical use of marijuana except in a handful of cases. However, in the UK medicinal marijuana is presently being produced sufficient to supply thousands of patients, and Canada recently authorized the cultivation of medicinal marijuana for compassionate dispensation, as well as for a renewed effort at medical evaluation.
In early June, I met with Penny Pennington Howard, a mother of three, who lives in Carrollton, Texas, about 25 minutes outside of Dallas. Posted in the glass of her front door are two signs you can’t quite make out from the sidewalk: one asking visitors not to smoke, as oxygen treatments are in use; the other a yellow diamond informing guests this is the home of a special needs child. Penny welcomed me inside, out of the glare of the sun, and led me through her living room into her kitchen, where her kids were gathered for lunch. Seth, then eight months old, was plucking cereal off the tray of his highchair, while Lily, seven, was darting back and forth between the countertop and table. Harper, a blond five-year-old with hot pink toenails, was reclining in her “tomato chair,” a molded plastic seat with straps to help keep her steady.

There are ways to strain dangerous contaminants out of raw hemp paste. And most companies stand behind their quality and safety procedures. “We continuously test all our products ... to ensure our consumers get the levels of natural constituents they expect from the quality hemp stalk oil they purchase,” HempMedsPx states on its web site. “Additionally, all our products are tested for safety, to ensure there are no solvents, heavy metals, or other potentially harmful materials in our oil. Because we take these steps, we are always confident in our products, and you can be too.”


In addition to positively affecting the endocannabinoid system, CBD has been the focus of more than 23,000 published studies about cannabinoids in relation to various medical indications including anxiety, epilepsy, inflammation, cancer and chronic pain to name few. For a more comprehensive look at these and other studies, visit our medical research and education page.
In his office, however, Hernandez was wary of the CBD boom. He advises well-meaning parents to think twice about voyaging into the world of over-the-counter hemp oil treatments, even if their circumstances are dire. “It’s a huge gimmick that a lot of companies are using,” Hernandez said. “You don’t know what you’re getting. ... There’s a major quality problem.”
One of the most curious uses of hemp is as a fence to prevent pollen transfer in commercial production of seeds. Isolation distances for ensuring that seeds produced are pure are considerable for many plants, and often impractical. At one point in the 1980s, the only permitted use of hemp in Germany was as a fence or hedge to prevent plots of beets being used for seed production from being contaminated by pollen from ruderal beets. The high and rather inpenetrable hedge that hemp can produce was considered unsurpassed by any other species for the purpose. As well, the sticky leaves of hemp were thought to trap pollen. However, Saeglitz et al. (2000) demonstrated that the spread of beet pollen is not effectively prevented by hemp hedges. Fiber (i.e. tall) cultivars of hemp were also once used in Europe as wind-breaks, protecting vulnerable crops against wind damage. Although hemp plants can lodge, on the whole very tall hemp is remarkably resistant against wind.
On the federal level, several bills currently before Congress seek to change the way the government treats CBD. One such bill, the Compassionate Access Act, would exclude CBD from the classification of “marijuana” and remove both from the DEA’s list of Schedule I controlled substances. Rescheduling CBD in such a way would make research and cultivation of CBD much easier.
Thank you for sharing your story. It is amazing the stories I have heard and the things you here the politicians debating over. The truth is out. They need to get over there guilty pride and pharmaceutical needs to be slapped down a few pegs. This is happening we just need to defend the corporations that back the oil, the pharma, any other corporation that doesn’t fight a health and balance model.
In the 1950s, the Narcotics Control Act and the Boggs Act stiffened penalties for marijuana possession, with first-time offenses requiring two to 10 year sentences and a minimum $20,000 fine, according to PBS.org. Penalties were relaxed in the 1970s, but President Ronald Reagan increased federal penalties for marijuana possession in the 1980s. On the federal level, marijuana is now regulated under the Controlled Substances Act as a schedule 1 drug, meaning the government considers it to have a high potential for abuse with no legitimate medical or therapeutic uses.
In recent years, a wide range of synthetic products, claiming to have similar effects to cannabis, have also been available in Australia. Synthetic cannabis is made up of chemicals that are designed to activate the same chemical systems in the brain as THC. These drugs are marketed as having similar physical and psychological effects as cannabis, but can have more unpredictable effects and are potentially more harmful than cannabis.
Exactly which companies Boehner suggests you invest in in order to build “the kind of wealth that lasts for generations,” he did not say during Tuesday’s nearly hourlong “American Cannabis Summit,” an extended infomercial for the investors’ network, though he and his co-presenters—veteran stock-tip salesman Mike Ward and Danny Brody, who helped take public a Canadian marijuana company that recorded $0 in sales in fiscal year 2018 and had zero kilograms of product in their inventory as of July, according to Seeking Alpha—did drop some clues.
Ten trials have evaluated the efficacy of inhaled Cannabis in chemotherapy-induced N/V.[35-38] In two of the studies, inhaled Cannabis was made available only after dronabinol failure. In the first trial, no antiemetic effect was achieved with marijuana in patients receiving cyclophosphamide or doxorubicin,[35] but in the second trial, a statistically significant superior antiemetic effect of inhaled Cannabis versus placebo was found among patients receiving high-dose methotrexate.[36] The third trial was a randomized, double-blind, placebo-controlled, crossover trial involving 20 adults in which both inhaled marijuana and oral THC were evaluated. One-quarter of the patients reported a favorable antiemetic response to the cannabinoid therapies. This latter study was reported in abstract form in 1984. A full report, detailing the methods and outcomes apparently has not been published, which limits a thorough interpretation of the significance of these findings.[37]
The vegetable oils have been classified by “iodine value” as drying (120–200), semi-drying (100–120), and non-drying (80–100), which is determined by the degree of saturation of the fatty acids present (Raie et al. 1995). Good coating materials prepared from vegetable oil depend on the nature and number of double bonds present in the fatty acids. Linseed oil, a drying oil, has a very high percentage of linolenic acid. Hempseed oil has been classified as a semi-drying oil, like soybean oil, and is therefore more suited to edible than industrial oil purposes. Nevertheless hemp oil has found applications in the past in paints, varnishes, sealants, lubricants for machinery, and printing inks. However, such industrial end uses are not presently feasible as the oil is considered too expensive (de Guzman 2001). Larger production volumes and lower prices may be possible, in which case hemp oil may find industrial uses similar to those of linseed (flax), soybean, and sunflower oils, which are presently used in paints, inks, solvents, binders, and in polymer plastics. Hemp shows a remarkable range of variation in oil constituents, and selection for oilseed cultivars with high content of valued industrial constituents is in progress.
In an in vivo model using severe combined immunodeficient mice, subcutaneous tumors were generated by inoculating the animals with cells from human non-small cell lung carcinoma cell lines.[23] Tumor growth was inhibited by 60% in THC-treated mice compared with vehicle-treated control mice. Tumor specimens revealed that THC had antiangiogenic and antiproliferative effects. However, research with immunocompetent murine tumor models has demonstrated immunosuppression and enhanced tumor growth in mice treated with THC.[24,25]
The above uses are based on hemp as a mechanical strengthener of materials. Hemp can also be chemically combined with materials. For example, hemp with gypsum and binding agents may produce light panels that might compete with drywall. Hemp and lime mixtures make a high quality plaster. Hemp hurds are rich in silica (which occurs naturally in sand and flint), and the hurds mixed with lime undergo mineralization, to produce a stone-like material. The technology is most advanced in France (Fig. 26). The mineralized material can be blown or poured into the cavities of walls and in attics as insulation. The foundations, walls, floors, and ceilings of houses have been made using hemp hurds mixed with natural lime and water. Sometimes plaster of Paris (pure gypsum), cement, or sand is added. The resulting material can be poured like concrete, but has a texture vaguely reminiscent of cork—much lighter than cement, and with better heat and sound-insulating properties. An experimental “ceramic tile” made of hemp has recently been produced (Fig. 27).
CBC is another lesser-known yet still crucial cannabinoid in marijuana, especially from a therapeutic perspective. While bereft of the psychoactive quality of THC (and to a lesser extent THCV), CBC is gaining popularity as an anxiety reducer. While research on cannabichromene lags behind others, there’s good reason to continue looking into its potential as a medicine.
Thermal Insulation. Thermal insulation products (Fig. 20, 21) are the third most important sector of the hemp industry of the EU. These are in very high demand because of the alarmingly high costs of heating fuels, ecological concerns about conservation of non-renewable resources, and political-strategic concerns about dependence on current sources of oil. This is a market that is growing very fast, and hemp insulation products are increasing in popularity. In Europe, it has been predicted that tens of thousands of tonnes will be sold by 2005, shared between hemp and flax (Karus et al. 2000).

Molecular analytical techniques developed in the late 20th century are being applied to questions of taxonomic classification. This has resulted in many reclassifications based on evolutionary systematics. Several studies of Random Amplified Polymorphic DNA (RAPD) and other types of genetic markers have been conducted on drug and fiber strains of Cannabis, primarily for plant breeding and forensic purposes.[73][74][24][75][76] Dutch Cannabis researcher E.P.M. de Meijer and coworkers described some of their RAPD studies as showing an "extremely high" degree of genetic polymorphism between and within populations, suggesting a high degree of potential variation for selection, even in heavily selected hemp cultivars.[36] They also commented that these analyses confirm the continuity of the Cannabis gene pool throughout the studied accessions, and provide further confirmation that the genus consists of a single species, although theirs was not a systematic study per se.


Cannabis has held sacred status in several religions. It has been used in an entheogenic context – a chemical substance used in a religious, shamanic, or spiritual context[59] - in the Indian subcontinent since the Vedic period dating back to approximately 1500 BCE, but perhaps as far back as 2000 BCE. There are several references in Greek mythology to a powerful drug that eliminated anguish and sorrow. Herodotus wrote about early ceremonial practices by the Scythians, thought to have occurred from the 5th to 2nd century BCE. In modern culture the spiritual use of cannabis has been spread by the disciples of the Rastafari movement who use cannabis as a sacrament and as an aid to meditation. The earliest known reports regarding the sacred status of cannabis in the Indian subcontinent come from the Atharva Veda estimated to have been written sometime around 2000–1400 BCE.[60]
The use of Cannabis for seed oil (Fig. 36) began at least 3 millennia ago. Hempseed oil is a drying oil, formerly used in paints and varnishes and in the manufacture of soap. Present cultivation of oilseed hemp is not competitive with linseed for production of oil for manufacturing, or to sunflower and canola for edible vegetable oil. However, as noted below, there are remarkable dietary advantages to hempseed oil, which accordingly has good potential for penetrating the salad oil market, and for use in a very wide variety of food products. There is also good potential for hemp oil in cosmetics and skin-care products.
In the 1950s, the Narcotics Control Act and the Boggs Act stiffened penalties for marijuana possession, with first-time offenses requiring two to 10 year sentences and a minimum $20,000 fine, according to PBS.org. Penalties were relaxed in the 1970s, but President Ronald Reagan increased federal penalties for marijuana possession in the 1980s. On the federal level, marijuana is now regulated under the Controlled Substances Act as a schedule 1 drug, meaning the government considers it to have a high potential for abuse with no legitimate medical or therapeutic uses.
CBD is a cannabinoid found in both cannabis and hemp. By using stringently controlled organic hemp – which only contains trace amounts of THC – we ensure that our lab here at Royal Queen Seeds can extract all of the CBD goodness, without any worry of THC contamination. RQS CBD Oil contains less than 0.2% THC, making impossible to get high with it, and legal in most EU countries.

Although always sold at a premium price, hemp clothing has a natural appeal to a sector of the population. Hemp clothes are resistant to abrasion, but are typically abrasive. However, appropriate processing and blending with other natural fibers has significantly improved the “feel” of the product, and in China hemp textiles indistinguishable from fine linens in texture are available. Weaving of hemp fibers into textiles and apparel is primarily done in China, Hungary, Romania, Russia, and the Ukraine. Processing costs are higher for industrial hemp because the fibers vary from the standard specifications for fiber length and diameter established for the equipment used in most textile and apparel factories, necessitating the use of specialty machines. The North American hemp apparel industry today is based on fiber, yarn, and fabrics imported from Eastern Europe and China. The extraction technology and spinning facilities, to say nothing of much lower labor costs, make it very difficult for the potential development of a hemp textile industry in North America. The fact that spinning facilities for natural fibers are so concentrated in China is making it increasingly difficult to competitively produce hemp fabrics elsewhere. This of course lessens the value-added future of growing hemp for a potential textile industry in North America. It is possible, however, that new technologies could change this situation, and especially in the EU development is underway to establish a fledgling domestic hemp textile industry. In addition to textiles used in clothing, coarser woven cloth (canvas) is used for upholstery, bags, sacks, and tarpaulins. There is very little effort in North America to produce such woven products, and non-woven material (Fig. 15) can be more easily produced. Hempline in Ontario, the first firm to grow hemp for commercial purposes in North America since the second word war (starting with experimental cultivation in 1994), is the exception, and is concerned with production of fiber for upholstery and carpeting.
Jump up ^ Blest-Hopley G, Giampietro V, Bhattacharyya S (May 2018). "Residual effects of cannabis use in adolescent and adult brains - A meta-analysis of fMRI studies". Neuroscience and Biobehavioral Reviews. 88: 26–41. doi:10.1016/j.neubiorev.2018.03.008. PMID 29535069. This may reflect the multitude of cognitive tasks employed by the various studies included in these meta-analyses, all of which involved performing a task thereby requiring the participant to reorient their attention and attempt to solve the problem at hand and suggest that greater engagement of this region indicates less efficient cognitive performance in cannabis users in general, irrespective of their age.
^ Jump up to: a b c Whiting, PF; Wolff, RF; Deshpande, S; Di Nisio, M; Duffy, S; Hernandez, AV; Keurentjes, JC; Lang, S; Misso, K; Ryder, S; Schmidlkofer, S; Westwood, M; Kleijnen, J (23 June 2015). "Cannabinoids for Medical Use: A Systematic Review and Meta-analysis" (PDF). JAMA. 313 (24): 2456–2473. doi:10.1001/jama.2015.6358. hdl:10757/558499. PMID 26103030.
In 2017, the cultivated area for hemp in the Prairie provinces include Saskatchewan with more than 56,000 acres (23,000 ha), Alberta with 45,000 acres (18,000 ha), and Manitoba with 30,000 acres (12,000 ha).[79] Canadian hemp is cultivated mostly for its food value as hulled hemp seeds, hemp oils and hemp protein powders, with only a small fraction devoted to production of hemp fiber used for construction and insulation.[79]
×