These CBD-only laws also attempt to impose some regulation on CBD oils, such as establishing how much CBD and THC such products must contain. For example, on June 1, the day I sat down with Hernandez in Fort Worth, Texas, Governor Greg Abbott signed the state’s Compassionate Use Act into law in Austin. The law requires that all CBD products contain no more than 0.5 percent THC and at least 10 percent CBD. However, the bill does not specify how the state plans to enforce this requirement. The law contains no language outlining how laboratories can test CBD products, what kinds of standards they would use, or who would regulate them.
Yet when one looks at the industry more broadly, there is cause for concern. In February, as part of an investigation into the marketing claims of six hemp oil companies, the FDA analyzed 18 CBD products. What it found was disturbing: Many of these supposed CBD products were entirely lacking in CBD. Of the products tested, six contained no cannabinoids whatsoever. Another 11 contained less than 1 percent CBD. The product that tested highest in CBD, at 2.6 percent, was a capsule for dogs. In states that have legalized CBD, regulations can require CBD products to contain at least 5 percent CBD, more often 10 or 15 percent.
According to researchers, 25 percent of all cancer patients use medical marijuana. Cancer patients are finding relief from medical cannabis. And they want to know more about it. Research conducted at St. George’s University of London, found the two most common cannabinoids in marijuana, tetrahydrocannabinol (THC) and cannabidiol (CBD), weakened the ferocity of cancer cells and made them more susceptible to radiation treatment. Other studies have shown that medical marijuana treatments can slow the growth of cancer cells and halt their spread to other parts of the body.
Topicals represent a newer emerging market in medical marijuana products geared toward health and beauty. Cannabinoids can be absorbed through the skin for certain therapeutic benefits without any psychoactivity. Additionally, the essential oils in hemp and cannabis provide many benefits for skin health. From moisturizers to shampoos and deodorants, medical cannabis products continue to diversify.
CDFA's Commercial Feed Regulatory Program (CFRP) is responsible for the enforcement of California state law and regulations pertinent to the manufacturing, distribution and labeling of commercial livestock feed while preventing adulterated feed from being consumed by livestock and poultry. For more information regarding livestock feed, contact CDFA's CFRP.
In 2014, I founded New Frontier Data, an analytics and business intelligence reporting group dedicated to the global cannabis industry, after more than 20 years in finance, industry analytics, intelligence reporting and emerging markets. As such, I have had the privilege of following hemp’s emergence and evolution. Half a decade later, this robust, environmentally friendly, low -cost-to-produce plant has become one of the most diversely applied and globally significant natural resources in the world. Here is a look at its applications across several mature industries:

Many animal studies have previously demonstrated that delta-9-THC and other cannabinoids have a stimulatory effect on appetite and increase food intake. It is believed that the endogenous cannabinoid system may serve as a regulator of feeding behavior. The endogenous cannabinoid anandamide potently enhances appetite in mice.[39] Moreover, CB1 receptors in the hypothalamus may be involved in the motivational or reward aspects of eating.[40]
By the 1930s, marijuana was banned in 24 states. The newly minted Federal Bureau of Narcotics launched a campaign against the drug, and newspapers fueled hysteria with headlines like the 1933 Los Angeles Examiner's "Murder Weed Found Up and Down the Coast — Deadly Marihuana Dope Plant Ready for Harvest That Means Enslavement of California Children." By 1937, Congress passed the Marihuana Tax Act, which effectively banned marijuana except for a few medicinal purposes, according to "Smoke Signals: A Social History of Marijuana – Medical, Recreational and Legal" (Scribner, 2012).
Buying online is less reliable still because there’s no regulation or standardization. What you see on the label may not be what you are getting. A 2017 study in JAMA found that of the 84 CBD products researchers bought online, 43% had more CBD than indicated, while 26% had less, and some had unexpected THC. “There’s a 75% chance of getting a product where the CBD is mislabeled,” says Marcu, one of the study’s coauthors.
The cultivation of hemp in the EU is heavily weighted toward fiber production over oilseed production. In 1999, the EU produced about 27,000 t of hemp fiber, but only about 6,200 t of hemp seeds, mostly in France, and 90% of this was used as animal feed (Karus et al. 2000). The seeds (Fig. 33) have traditionally been employed as bird and poultry feed, but feeding the entire seeds to livestock has been considered to be a poor investment because of the high cost involved (although subsidization in Europe allows such usage, especially in France where hemp seeds are not legally permitted in human food). As pointed out later, higher yield and better harvesting practices may make whole hempseed an economical livestock feed. Moreover, seed cake left after expressing the oil is an excellent feed. Efforts are underway in Europe to add value in the form of processed products for hemp, especially cosmetics and food but, as noted below, the North American market is already quite advanced in oilseed applications.
Hemp is a bast fiber crop, i.e. the most desirable (“long”) fibers are found in the phloem-associated tissues external to the phloem, just under the “bark.” The traditional and still major first step in fiber extraction is to ret (“rot”) away the softer parts of the plant, by exposing the cut stems to microbial decay in the field (“dew retting,” shown in Figs. 46 and 47) or submerged in water (“water retting, ” shown in Fig. 13). The result is to slough off the outer parts of the stem and to loosen the inner woody core (the “hurds”) from the phloem fibers (Fig. 14). Water retting has been largely abandoned in countries where labor is expensive or environmental regulations exist. Water retting, typically by soaking the stalks in ditches, can lead to a high level of pollution. Most hemp fiber used in textiles today is water retted in China and Hungary. Retting in tanks rather than in open bodies of water is a way of controlling the effluents while taking advantage of the high-quality fiber that is produced. Unlike flax, hemp long fiber requires water retting for preparation of high-quality spinnable fibers for production of fine textiles. Improved microorganisms or enzymes could augment or replace traditional water retting. Steam explosion is another potential technology that has been experimentally applied to hemp (Garcia-Jaldon et al. 1998). Decorticated material (i.e. separated at least into crude fiber) is the raw material, and this is subjected to steam under pressure and increased temperature which “explodes” (separates) the fibers so that one has a more refined (thinner) hemp fiber that currently is only available from water retting. Even when one has suitably separated long fiber, specialized harvesting, processing, spinning and weaving equipment are required for preparing fine hemp textiles. The refinement of equipment and new technologies are viewed as offering the possibility of making fine textile production practical in western Europe and North America, but at present China controls this market, and probably will remain dominant for the foreseeable future.
As of March 2016, more than half of the 50 states have laws that allow for some hemp production, according to this chart. Yet, many states, such as California, where Jungmaven is based, will only allow for industrial hemp cultivation when federal law coincides with state law. That is, when Congress passes a bill permitting industrial hemp across the US. Currently, Jungmann imports his hemp from China, but he’s confident Congress will pass the bill legalizing industrial farming of hemp in July.
CatryNA49; Cannabis, like Opium poppies, and the substances derived from these plants, were also made illegal as a means of preventing white females, from being seduced, and or raped by male members of minority races; seriously ! In the early 70s Nixon administration officials oversaw the expansion of drug laws, as a means of legally repressing the two groups of Americans, that administration deemed to be their biggest foes; those groups being, African Americans, and the antiwar left. We know the drug war, just like the earlier less repressive drug laws, was initiated as a means of legal political, and racial repression because of the fact that a Nixon adm. official is on film, admitting as much. You can Google that film if you like. Now despite the truth about the drug war being admitted on film, for anyone in the world who has internet access can see, the drug war continues to be waged by politicians; the same politicians by the way, that tens of millions of Americans continue to vote for. I should add, that in the last presidential election, the candidate who promised to refuel the drug war, was the candidate who won that election. Of course what else could you expect, being that we live in the land of the free and the home of the brave ?!
In the United States, the legality of medical marijuana varies in substantial ways from state to state. There are currently 29 US states with legal medical cannabis laws, as well as the District of Columbia. That leaves 21 states where medical marijuana is entirely prohibited. Marijuana cultivation, possession, and use in any form is illegal at the federal level.
The more recently House-approved version, which introduced the well-publicized provision affecting up to two million Supplemental Nutrition Assistance Program (SNAP) recipients, doesn't take such steps to remove federal barriers around hemp. It also stipulates that anyone with a felony drug conviction would be barred indefinitely from participating in federal or state hemp programs.
Hemp, Canabis sativa is a plant originally from central Asia. It was cultivated with, and sometimes in place of flax because the stem fibers are similar. By the seventeenth century, Russia, Latvia, and other countries around the Baltic Sea were the major producers of hemp. It was from these areas Britain obtained its supply. However, during periods of military hostilities, the English had trouble acquiring enough hemp.
Cultivated in at least 30 countries, monikers for the hemp plant often allude to its origin or use, such as Manila hemp (abacá, Musa textilis), sisal hemp (Agave sisalana), Indian hemp (Apocynumcannabinum) and New Zealand hemp (Phormiumtenax). Worldwide, hemp seed production alone has soared from around 33,000 metric tons in the late ’90s to more than 100,000 metric tons annually between 2005 and 2011.
Industrial hemp is marketed a fiber, as a seed, or as a dual-purpose crop. Although detailed market information for hemp ins not readily available, estimates from Vote Hemp show that the total retail value of hemp products in the U.S. in 2017 was $820 million. This includes food and body products, clothing, auto parts, building materials, and other products.
Jump up ^ Fernández-Ruiz J, Sagredo O, Pazos MR, García C, Pertwee R, Mechoulam R, Martínez-Orgado J (February 2013). "Cannabidiol for neurodegenerative disorders: important new clinical applications for this phytocannabinoid?". British Journal of Clinical Pharmacology. 75 (2): 323–33. doi:10.1111/j.1365-2125.2012.04341.x. PMC 3579248. PMID 22625422.
Plastic composites for automobiles are the second most important component of the hemp industry of the EU. Natural fibers in automobile composites are used primarily in press-molded parts (Fig. 18). There are two widespread technologies. In thermoplastic production, natural fibers are blended with polypropylene fibers and formed into a mat, which is pressed under heat into the desired form. In thermoset production the natural fibers are soaked with binders such as epoxy resin or polyurethane, placed in the desired form, and allowed to harden through polymerization. Hemp has also been used in other types of thermoplastic applications, including injection molding. The characteristics of hemp fibers have proven to be superior for production of molded composites. In European manufacturing of cars, natural fibers are used to reinforce door panels, passenger rear decks, trunk linings, and pillars. In 1999 over 20,000 t of natural fiber were used for these purposes in Europe, including about, 2,000 t of hemp. It has been estimated that 5–10 kg of natural fibers can be used in the molded portions of an average automobile (excluding upholstery). The demand for automobile applications of hemp is expected to increase considerably, depending on the development of new technologies (Karus et al. 2000).
There is also considerable potential for other industries using hemp in the manner that the automobile industry has demonstrated is feasible. Of course, all other types of transportation vehicles from bicycles to airplanes might make use of such technology. Natural fibers have considerable advantages for use in conveyance (Karus et al. 2000): low density and weight reduction, favorable mechanical, acoustical, and processing properties (including low wear on tools), no splintering in accidents, occupational health benefits (compared to glass fibers), no off-gassing of toxic compounds, and price advantages. Additional types of composite using hemp in combination with other natural fibers, post-industrial plastics or other types of resins, are being used to produce non-woven matting for padding, sound insulation, and other applications.

Locsta....I share your pain of degenerative and bulging disk disease, along with fibromyalgia, chronic fatigue and arthritis. Absolutely no energy and chronic pain all day, every day. I'm curious as to what type and brand of the CBD oil you are taking and for how long have you been using it? I've been researching CBD oil for months and am quite confused!
France is Europe's biggest producer (and the world's second largest producer) with 8,000 hectares cultivated.[80] 70-80% of the hemp fibre produced in 2003 was used for specialty pulp for cigarette papers and technical applications. About 15% was used in the automotive sector, and 5-6% was used for insulation mats. About 95% of hurds were used as animal bedding, while almost 5% was used in the building sector.[14] In 2010/2011, a total of 11,000 hectares (27,000 acres) was cultivated with hemp in the EU, a decline compared with previous year.[68][81]
In addition to providing useful fibers, hemp seed also has high nutritional value. and the plant can be used to make biodegradable plastics, some fuels, and a variety of other things. Hemp foods including but not limited to hemp energy bars, hemp salad dressing,hemp milk, hemp protein shakes, hemp oil gel caps and hemp protein powder are among some of the health products being produced today. Visit the Hemp Education pages to learn more!
Hemp is the fiber and seed part of the Cannabis Sativa L. plant, opposed to the flower part of the plant which is “legally considered” marijuana.  The fiber and seeds are incredible valuable and is why hemp is often called a “cash crop”.  Hemp is a very hearty plant and grows very quickly in very diverse soil conditions.  Cultivation of hemp for industrial purposes has been done by many civilizations for over 12,000 years.   Industrial hemp was the desired fiber used to manufacture rope, canvas, paper, and clothing until alternative textiles and synthetics for these purposes were discovered.  Although China has been the largest hemp producer over the years, other countries such as Australia and Canada are catching up.  It has been illegal for anyone to grow hemp in the United States as hemp is illegal under the marijuana prohibition act but Colorado has changed the laws and paved the way for industrial hemp production again in the United States(see hemp history). Now hemp oils, hemp plastics, hemp building materials and many hemp fiber products can be seen and purchased on the market. Hemp is truly an amazing plant with the potential to help “green up” many industries.
Laboratory evidence indicated that cannabidiol may reduce THC clearance, increasing plasma concentrations which may raise THC availability to receptors and enhance its effect in a dose-dependent manner.[28][29] In vitro, cannabidiol inhibited receptors affecting the activity of voltage-dependent sodium and potassium channels, which may affect neural activity.[30] A small clinical trial reported that CBD partially inhibited the CYP2C-catalyzed hydroxylation of THC to 11-OH-THC.[31]
Some individuals have been found to have mutations on the CNR1 gene, which is responsible for coding the CB1 receptor (a type of receptor in cells throughout your body that interacts with cannabinoids). Issues with the CNR1 gene can ultimately result in a poorly functioning endocannabinoid system, which is an important variable when figuring out how to use CBD oil.
Hash oil is a resinous matrix of cannabinoids obtained from the Cannabis plant by solvent extraction,[175] formed into a hardened or viscous mass.[176] Hash oil can be the most potent of the main cannabis products because of its high level of psychoactive compound per its volume, which can vary depending on the plant's mix of essential oils and psychoactive compounds.[177] Butane and supercritical carbon dioxide hash oil have become popular in recent years.[178]

Reproduced with kind permission from the Australian Drug Foundation. References Australian Drug Foundation. Cannabis Facts. Last updated 25 Jan 2012. http://www.druginfo.adf.org.au/drug-facts/cannabis (accessed Jan 2013). Australian Drug Foundation (ADF) Vision: Healthy People, Strong Communities. Mission: Working together to prevent alcohol and other drug problems in communities.Related ArticlesCannabis psychosisUse of cannabis can cause a condition called drug-induced psychosis. Cannabis useCannabis can affect your physical and mental health with heavy cannabis use potentially causing psycCannabis: tolerance and dependenceAfter prolonged use, cannabis is addictive and people using cannabis regularly develop dependence anCannabis: withdrawal and treatmentIf a dependent person stops taking cannabis, they may experience withdrawal symptoms. Cannabis/marijuana: what are the effects?The effect of cannabis on a person depends on many factors including their size, weight and health aAdvertisement


Hemp allows farmers to build a livelihood from a crop that’s both good for the environment and the growers themselves. Hemp puts back nitrogen into the soil. Cotton, on the other hand, can deplete the land’s nutrients, especially if not rotated with other crops. Unlike cotton which produces shorter fibers, hemp, though brittle when dry, thrives when it’s wet, explains Derek Thomas, co-founder of Hemp Blue, a LA-based startup producing hemp-based jeans, jackets, and shirts. The long, wet fibers don’t break, but actually grow in strength, he says. Hemp’s longer, wet fibers have greater durability than cotton, which has short fibers that need to be spun and woven.
On October 17, 2018, Canada legalized cannabis for recreational adult use[54] making it the second country in the world to do so after Uruguay and the first G7 nation.[55] The Canadian Licensed Producer system may become the Gold Standard in the world for safe and secure cannabis production,[56] including provisions for a robust craft cannabis industry where many expect opportunities for experimenting with different strains.[57] Laws around use vary from province to province including age limits, retail structure, and growing at home.[58]
Cannabinoids are known to interact with the hepatic cytochrome P450 enzyme system.[3,4] In one study, 24 cancer patients were treated with intravenous irinotecan (600 mg, n = 12) or docetaxel (180 mg, n = 12), followed 3 weeks later by the same drugs concomitant with medicinal Cannabis taken in the form of an herbal tea for 15 consecutive days, starting 12 days before the second treatment.[4] The administration of Cannabis did not significantly influence exposure to and clearance of irinotecan or docetaxel, although the herbal tea route of administration may not reproduce the effects of inhalation or oral ingestion of fat-soluble cannabinoids.
In September 2005, New Scientist reported that researchers at the Canberra Institute of Technology had identified a new type of Cannabis based on analysis of mitochondrial and chloroplast DNA.[80] The New Scientist story, which was picked up by many news agencies and web sites, indicated that the research was to be published in the journal Forensic Science International.[81]
A large, retrospective cohort study of 64,855 men aged 15 to 49 years from the United States found that Cannabis use was not associated with tobacco-related cancers and a number of other common malignancies. However, the study did find that, among nonsmokers of tobacco, ever having used Cannabis was associated with an increased risk of prostate cancer.[6]
^ Jump up to: a b c This paper begins with a history of hemp use and then describes how hemp was constructed as a dangerous crop in the U.S. The paper then discusses the potential of hemp as an alternative crop. Luginbuhl, April M. (2001). "Industrial hemp (Cannabis sativa L): The geography of a controversial plant". The California Geographer (PDF). 41. California Geographical Society. pp. 1–14. Retrieved 2013-03-28. Hemp contains less than 1% THC, or tetrahydrocannabinols, the psychoactive property in marijuana. In other words, smoking hemp cannot create a 'high.' ... The dense growth of hemp eliminates other weeds.... The best growing technique for hemp, planting 300 to 500 plants per square meter, also helps authorities easily tell the hemp from marijuana, which is a plant that is less densely cultivated. (Roulac 1997; 149).
The use of Cannabis for seed oil (Fig. 36) began at least 3 millennia ago. Hempseed oil is a drying oil, formerly used in paints and varnishes and in the manufacture of soap. Present cultivation of oilseed hemp is not competitive with linseed for production of oil for manufacturing, or to sunflower and canola for edible vegetable oil. However, as noted below, there are remarkable dietary advantages to hempseed oil, which accordingly has good potential for penetrating the salad oil market, and for use in a very wide variety of food products. There is also good potential for hemp oil in cosmetics and skin-care products.
States have passed laws creating or allowing for the establishment of industrial hemp research or pilot programs. State agencies and institutions of higher education administer these programs in order to study the cultivation, processing, and economics of industrial hemp. Pilot programs may be limited to a certain period of time and may require periodic reporting from participants and state agencies. Some states establish specific regulatory agencies or committees, rules, and goals to oversee the research programs. States may also require coordination between specific colleges or universities and the programs, in other states coordination is optional. From 2015 to 2016, seven states enacted legislation to create hemp research or pilot programs, including Pennsylvania (H.B. 976) and Hawaii (S.B. 2659).
Hemp is grown in temperate zones as an annual cultivated from seed and can reach a height of up to 5 metres (16 feet). Crops grow best in sandy loam with good drainage and require average monthly rainfall of at least 65 mm (2.5 inches) throughout the growing season. Crops cultivated for fibre are densely sowed and produce plants averaging 2–3 metres (6–10 feet) tall with almost no branching. Plants grown for oilseed are planted farther apart and are shorter and many-branched. The slender stalks are hollow except at the tip and base. The leaves are compound with palmate shape, and the flowers are small and greenish yellow. Seed-producing flowers form elongate, spikelike clusters growing on the pistillate, or female, plants. Pollen-producing flowers form many-branched clusters on staminate, or male, plants. Maximum yield and quality are obtained by harvesting soon after the plants reach maturity, indicated by the full blossoms and freely shedding pollen of the male plants. Although sometimes pulled up by hand, plants are more often cut off about 2.5 cm (1 inch) above the ground.
Fig. 5. Typical architecture of categories of cultivated Cannabis sativa. Top left: narcotic plants are generally low, highly branched, and grown well-spaced. Top right: plants grown for oilseed were traditionally well-spaced, and the plants developed medium height and strong branching. Bottom left: fiber cultivars are grown at high density, and are unbranched and very tall. Bottom center: “dual purpose” plants are grown at moderate density, tend to be slightly branched and of medium to tall height. Bottom right: some recent oilseed cultivars are grown at moderate density and are short and relatively unbranched. Degree of branching and height are determined both by the density of the plants and their genetic background.

In recent years, hemp has been growing in popularity as a material used in shoes. Today you can find boots, athletic shoes, sandals, and dress shoes that are made with 100% hemp fiber, or textiles that blend hemp fibers with materials such as cotton, jute, virgin polyester, and recycled polyester. The strength of hemp fibers makes it an ideal material for shoes because it's durable. In addition, it's breathable and naturally antimicrobial, so it doesn't hold on to odors.[41] Because hemp can be grown sustainably, shoes, clothing, and accessories made with hemp are representative of the sustainable fashion movement.
×