However, it is important to note that the production of derivatives or products made from whole industrial hemp plants, including sprouts, or the leaves, flowers or bracts of those plants, cannot be authorized by a licence issued under the IHR. Most activities with whole industrial hemp plants, including sprouts, or with the leaves, flowers or bracts of the plant, fall outside of the application of the IHR. These activities are controlled under the CDSA and are not authorized under the IHR."
Canabidol™ Oral Capsules deliver 100% Cannabis Sativa L. from specifically bred industrial hemp plants containing high potency Cannabidiol. Each CBD capsule contains all the Cannabinoids, terpenoids, essential oils and all the other compounds of the cannabis plant. A packet of 30 capsules contains 15,000mg of Cannabis Sativa L. and 300mg of CBD (Cannabidiol) Each capsule contains 500mg of Cannabis Sativa L. and 10mg of the active ingredient CBD
The cultivation of hemp in the EU is heavily weighted toward fiber production over oilseed production. In 1999, the EU produced about 27,000 t of hemp fiber, but only about 6,200 t of hemp seeds, mostly in France, and 90% of this was used as animal feed (Karus et al. 2000). The seeds (Fig. 33) have traditionally been employed as bird and poultry feed, but feeding the entire seeds to livestock has been considered to be a poor investment because of the high cost involved (although subsidization in Europe allows such usage, especially in France where hemp seeds are not legally permitted in human food). As pointed out later, higher yield and better harvesting practices may make whole hempseed an economical livestock feed. Moreover, seed cake left after expressing the oil is an excellent feed. Efforts are underway in Europe to add value in the form of processed products for hemp, especially cosmetics and food but, as noted below, the North American market is already quite advanced in oilseed applications.
^ Jump up to: a b Resstel LB, Tavares RF, Lisboa SF, Joca SR, Corrêa FM, Guimarães FS (January 2009). "5-HT1A receptors are involved in the cannabidiol-induced attenuation of behavioural and cardiovascular responses to acute restraint stress in rats". British Journal of Pharmacology. 156 (1): 181–8. doi:10.1111/j.1476-5381.2008.00046.x. PMC 2697769. PMID 19133999.
Hemp is not the same as marijuana. One really has nothing to do with the other. Hemp was made illegal back in the days when cotton was king in the south and southern cotton plantation owners did not want the competition. They lobbied for, and got a law against hemp being grown nationwide. It never had to do with drugs at that time, and still doesn’t. As always, money and government go hand in hand. Now, recently, South Carolina has legalized growing hemp again, which is the only state in 50 to do so. We will hope for more enlightened agri-business legislation across the nation, soon.
In the United States, non-FDA approved CBD products are classified as Schedule I drugs under the Controlled Substances Act.[63] This means that production, distribution, and possession of non-FDA approved CBD products is illegal under federal law. In addition, in 2016 the Drug Enforcement Administration added "marijuana extracts" to the list of Schedule I drugs, which it defined as "an extract containing one or more cannabinoids that has been derived from any plant of the genus Cannabis, other than the separated resin (whether crude or purified) obtained from the plant."[64] Previously, CBD had simply been considered "marijuana", which is a Schedule I drug.[63][65]
Because cannabinoid receptors, unlike opioid receptors, are not located in the brainstem areas controlling respiration, lethal overdoses from Cannabis and cannabinoids do not occur.[1-4] However, cannabinoid receptors are present in other tissues throughout the body, not just in the central nervous system, and adverse effects include tachycardia, hypotension, conjunctival injection, bronchodilation, muscle relaxation, and decreased gastrointestinal motility.
Approximately 65% of sub-Saharan Africa’s agricultural land is degraded, according to data collected in 2015, resulting in food insecurity and a declining economy in a region where the agricultural industry employs more than half of the total labor force. Hemp’s soil nutrient replenishing properties could be the key to reviving crop production, providing a novel food source (hemp seeds) and boosting the agro-based economies of South Africa and other hemp-cultivating sub-Saharan countries.
With respect to fiber, a “composite” is often defined as a material consisting of 30%–70% fiber and 70%–30% matrix (Bolton 1995). However, in North America particleboards and fiberboards, which generally contain less than 10% adhesive or matrix, are sometimes referred to as composites. This section addresses plastic-type composites. In plastics, fibers are introduced to improve physical properties such as stiffness, impact resistance, bending and tensile strength. Man-made fibers of glass, kevlar and carbon are most commonly used today, but plant fibers offer considerable cost savings along with comparable strength properties.

Only a handful of countries have legalized recreational marijuana. Uruguay was one of the first, in 2013. The Netherlands is perhaps the country most known for legal marijuana, yet the drug is illegal there. Spain has given its citizens the rights to grow and consume cannabis privately. Peru also allows citizens to possess marijuana as long as it is for personal, private use. As in Costa Rica, where people can have a “small amount,” without legal trouble.
According to Delphic analysis by British researchers in 2007, cannabis has a lower risk factor for dependence compared to both nicotine and alcohol.[97] However, everyday use of cannabis may be correlated with psychological withdrawal symptoms, such as irritability or insomnia,[93] and susceptibility to a panic attack may increase as levels of THC metabolites rise.[98][99] However, cannabis withdrawal symptoms are typically mild and are never life-threatening.[100]
Quality is a particular concern, because cannabis plants easily soak up heavy metals from pesticides and other contaminants, Marcu says. If you are buying online, look for a company that documents how it tests its products. (If the website doesn’t indicate this, call and ask.) “Buying from a reputable manufacturer is crucial, because it matters how the plant is cultivated and processed,” Dr. Maroon says. One clue that a company is cutting corners: too low a cost. Good CBD is pricey—a bottle of high-quality capsules is sold in Cohen’s office for $140. But for many, it’s worth the money. Roth spent $60 on her tiny bottle. But when her energy returned the day she started taking CBD, she decided that was a small price to pay.

Some of the reference citations in this summary are accompanied by a level-of-evidence designation. These designations are intended to help readers assess the strength of the evidence supporting the use of specific interventions or approaches. The PDQ Integrative, Alternative, and Complementary Therapies Editorial Board uses a formal evidence ranking system in developing its level-of-evidence designations.


Ten years ago hemp cultivation was illegal in Germany, England, Canada, Australia, and other countries. Essential to overcoming governmental reluctance in each country was the presentation of an image that was business-oriented, and conservative. The merits of environmentalism have acquired some political support, but unless there is a reasonable possibility that hemp cultivation is perceived as potentially economically viable, there is limited prospect of having anti-hemp laws changed. Strong support from business and farm groups is indispensable; support from pro-marijuana interests and what are perceived of as fringe groups is generally counterproductive. It is a combination of prospective economic benefit coupled with assurance that hemp cultivation will not detrimentally affect the enforcement of marijuana legislation that has led most industrially advanced countries to reverse prohibitions against growing hemp. Should the US permit commercial hemp cultivation to resume, it will likely be for the same reasons.
“The plan? Whip the public into a frenzy over ill effects of marijuana, the psychoactive leaves and flowers of the hemp plant; the reputation of the fibers and seeds used by industry would be posing little threat to society emerged as the ‘assassin of youth.’ The strategy worked. In 1937, with virtually no warning, Congress announced a prohibitive tax on hemp, effectively ending the production and sale of the plant in the United States.
"They nailed this story every step of the way, even when the company itself seemed to be totally clueless — or perhaps something even worse — about its own prospects," he said. "Which is why you do need to take your cue from these two gentlemen and wait until the real problems they say are solved before you get bullish. And they sure aren't there yet."

These CBD-only laws also attempt to impose some regulation on CBD oils, such as establishing how much CBD and THC such products must contain. For example, on June 1, the day I sat down with Hernandez in Fort Worth, Texas, Governor Greg Abbott signed the state’s Compassionate Use Act into law in Austin. The law requires that all CBD products contain no more than 0.5 percent THC and at least 10 percent CBD. However, the bill does not specify how the state plans to enforce this requirement. The law contains no language outlining how laboratories can test CBD products, what kinds of standards they would use, or who would regulate them.

The genus Cannabis was formerly placed in the nettle (Urticaceae) or mulberry (Moraceae) family, and later, along with the genus Humulus (hops), in a separate family, the hemp family (Cannabaceae sensu stricto).[44] Recent phylogenetic studies based on cpDNA restriction site analysis and gene sequencing strongly suggest that the Cannabaceae sensu stricto arose from within the former family Celtidaceae, and that the two families should be merged to form a single monophyletic family, the Cannabaceae sensu lato.[45][46]


The first step to finding your correct CBD dosage is getting as much information as you can about the product you’re using. What is the concentration of CBD? Are there third-party lab tests that can confirm that? The CBD industry is still mainly a grassroots therapeutic movement, and as such, largely unregulated. Concentration and purity levels can differ greatly depending on the manufacturing process.  

And without high-quality trials, experts don’t know how much is best for a given purpose. The staff at Roth’s dispensary told her, “Try some once or twice a day and see what happens.” (Half a dropper’s worth was a good amount for her.) One thing scientists feel confident about is that CBD is not dangerous. It won’t damage vital organs even at doses as high as 5,000 mg a day, Marcu says, and nobody has died from simply overdosing on a cannabis product.


Edible cannabis, however, is quickly making up ground as a go-to method for consuming medical marijuana. Indeed, some states with legal medical marijuana laws still forbid smoking marijuana. Instead, medical forms of the drug are only available in pill or capsule form. Oils and tinctures, which are made from extracting cannabinoids from herbaceous material, are also commonly prescribed in the form of cannabis edibles.
I wanted to tell people here that CBD has been very effective for my anxiety, and helps with insomnia. For me, it was a cumulative effect, after a week of one dropper of oil, I can sleep very well at night. I feel like I am not polluting my body with commercial pharmaceuticals. I wish everyone here the best, and hope it works for you as well as it has for me.
Plastic composites for automobiles are the second most important component of the hemp industry of the EU. Natural fibers in automobile composites are used primarily in press-molded parts (Fig. 18). There are two widespread technologies. In thermoplastic production, natural fibers are blended with polypropylene fibers and formed into a mat, which is pressed under heat into the desired form. In thermoset production the natural fibers are soaked with binders such as epoxy resin or polyurethane, placed in the desired form, and allowed to harden through polymerization. Hemp has also been used in other types of thermoplastic applications, including injection molding. The characteristics of hemp fibers have proven to be superior for production of molded composites. In European manufacturing of cars, natural fibers are used to reinforce door panels, passenger rear decks, trunk linings, and pillars. In 1999 over 20,000 t of natural fiber were used for these purposes in Europe, including about, 2,000 t of hemp. It has been estimated that 5–10 kg of natural fibers can be used in the molded portions of an average automobile (excluding upholstery). The demand for automobile applications of hemp is expected to increase considerably, depending on the development of new technologies (Karus et al. 2000).
You cannot have a fatal overdose from cannabis use. However, if you have too much in one session it can lead to a very unpleasant experience. Anxiety and panic attacks, disorientation, and inability to focus are all signs you have had too much. Other negative effects from taking too much include loss of coordination, shortness of breath, increased heart rate and shaking, chills and sweats. 
Hemp is a bast fiber crop, i.e. the most desirable (“long”) fibers are found in the phloem-associated tissues external to the phloem, just under the “bark.” The traditional and still major first step in fiber extraction is to ret (“rot”) away the softer parts of the plant, by exposing the cut stems to microbial decay in the field (“dew retting,” shown in Figs. 46 and 47) or submerged in water (“water retting, ” shown in Fig. 13). The result is to slough off the outer parts of the stem and to loosen the inner woody core (the “hurds”) from the phloem fibers (Fig. 14). Water retting has been largely abandoned in countries where labor is expensive or environmental regulations exist. Water retting, typically by soaking the stalks in ditches, can lead to a high level of pollution. Most hemp fiber used in textiles today is water retted in China and Hungary. Retting in tanks rather than in open bodies of water is a way of controlling the effluents while taking advantage of the high-quality fiber that is produced. Unlike flax, hemp long fiber requires water retting for preparation of high-quality spinnable fibers for production of fine textiles. Improved microorganisms or enzymes could augment or replace traditional water retting. Steam explosion is another potential technology that has been experimentally applied to hemp (Garcia-Jaldon et al. 1998). Decorticated material (i.e. separated at least into crude fiber) is the raw material, and this is subjected to steam under pressure and increased temperature which “explodes” (separates) the fibers so that one has a more refined (thinner) hemp fiber that currently is only available from water retting. Even when one has suitably separated long fiber, specialized harvesting, processing, spinning and weaving equipment are required for preparing fine hemp textiles. The refinement of equipment and new technologies are viewed as offering the possibility of making fine textile production practical in western Europe and North America, but at present China controls this market, and probably will remain dominant for the foreseeable future.
APPLICATIONS ARE NOW AVAILABLE for the 2019 Industrial Hemp Research Pilot Program. You can access the Grower Application Packet, the Processor/Handler Application Packet, and the University/College Affiliation Application Packet on the Program Page titled "Applications for the Hemp Program" in the right side bar (or scroll further down on mobile devices) or through the green link in the description below. Complete instructions and guidelines for applicants are contained in the application packets. Grower applications are due November 30, 2018 at 4:30 PM Eastern Time.
Designed to provide the optimum absorption of CBD into the blood stream by employing a patented slow release delivery system. It’s well accepted that CBD is most effective when taken sublingualy, however most oils when taken in this way are swallowed and broken down by your body. The Gel-Tab™. is placed under the tongue and the CBD is slowly absorbed resulting in higher rates of CBD being absorbed than what would be achieved with a normal oil
A 2012 review found that the THC content in marijuana had increased worldwide from 1970 to 2009.[150] It is unclear, however, whether the increase in THC content has caused people to consume more THC or if users adjust based on the potency of the cannabis. It is likely that the higher THC content allows people to ingest less tar. At the same time, CBD levels in seized samples have lowered, in part because of the desire to produce higher THC levels and because more illegal growers cultivate indoors using artificial lights. This helps avoid detection but reduces the CBD production of the plant.[151]
But, uh, what is it that CBD is supposed to do? I visited a cannabis dispensary in Boulder to find out what the hype was all about. After passing an ID check, I was introduced to a “budtender” who pointed me to an impressive array of CBD products — tinctures, skin patches, drink powders, candies, salves, massage oil, lotions, “sexy time personal intimacy oil” and even vaginal suppositories to treat menstrual cramps.
The United Kingdom and Germany resumed commercial production in the 1990s. British production is mostly used as bedding for horses; other uses are under development. Companies in Canada, the UK, the United States, and Germany, among many others, process hemp seed into a growing range of food products and cosmetics; many traditional growing countries still continue to produce textile-grade fibre.

Preliminary research indicates that cannabidiol may reduce adverse effects of THC, particularly those causing intoxication and sedation, but only at high doses.[26] Safety studies of cannabidiol showed it is well-tolerated, but may cause tiredness, diarrhea, or changes in appetite as common adverse effects.[27] Epidiolex documentation lists sleepiness, insomnia and poor quality sleep, decreased appetite, diarrhea, and fatigue.[3]
Canabidol™ CBD cannabis oil (CBD Oli) is derived from EU approved, UK & US legal, industrial hemp (Cannabis Sativa L.) The active ingredient is Cannabidiol as our products are THC free, meaning that they are non psychoactive so will not get you high. CBD Oil (Cannabidiol) is not scheduled and is found in all hemp products which makes it legal in both the UK and US. Manufactured in England to the highest standards Canabidol™ is now sent out from our United Kingdom distribution centre.  You can also purchase our range of CBD oil products direct from one of our many stores across the UK.
A combination of global overproduction of milk and increasing demand for non-dairy alternatives have crippled farmers whose livelihoods are often built on familial farms, passed down between generations. For many red-blooded farmers living in America's heartlands, agribusinesses are not just a means of putting food on the table. The legacy of farming runs through their veins, and the devastation happening within the industry is just as much a personal blow as it is a financial one.
Over the past two years, 17 states have passed laws legalizing CBD so that patients can obtain the drug without fear of prosecution from local authorities. For intractable childhood epilepsies—the sorts of seizure disorders that for centuries have ruined lives and shattered families, the ones even specialists like Hernandez dread—CBD could be a miracle cure.
Cannabis use generally makes psychotic symptoms worse and lowers the person’s chances of recovery from a psychotic episode. People with a psychotic illness who use drugs experience more delusions, hallucinations and other symptoms. They have a higher rate of hospitalisation for psychosis, and treatment is generally less effective for them. People with a psychotic illness should not use cannabis.
Designed to provide the optimum absorption of CBD into the blood stream by employing a patented slow release delivery system. It’s well accepted that CBD is most effective when taken sublingualy, however most oils when taken in this way are swallowed and broken down by your body. The Gel-Tab™. is placed under the tongue and the CBD is slowly absorbed resulting in higher rates of CBD being absorbed than what would be achieved with a normal oil
Although hemp can be successfully grown continuously for several years on the same land, rotation with other crops is desirable. A 3- or preferably 4-year rotation may involve cereals, clover or alfalfa for green manure, maize, and hemp. In Ontario it has been recommended that hemp not follow canola, edible beans, soybeans or sunflowers. However, according to Bócsa and Karus (1998), “it matters little what crops are grown prior to hemp.”
Marijuana regulators in Washington State will entertain sweeping changes to how marijuana is tested, processed, packaged and sold in one of the U.S.’s oldest recreational marijuana markets, officials announced late Wednesday. Recreational cannabis has been sold in regulated retail outlets in Washington since 2014. Consumers there pay one of the country’s highest tax burdens, generating … Continue reading Washington State Prepares To Rewrite Marijuana Testing And Packaging Rules
CBD is a 5-HT1A receptor agonist, which may also contribute to an anxiolytic effect.[146] This likely means the high concentrations of CBD found in Cannabis indica mitigate the anxiogenic effect of THC significantly.[146] The cannabis industry claims that sativa strains provide a more stimulating psychoactive high while indica strains are more sedating with a body high.[147] However this is disputed by researchers.[148]
"The data supporting efficacy and dosing are specific to one product: Epidiolex," Bonn-Miller says. "That's not necessarily translatable to 'Joe Bob's CBD Blend.'" A CBD extract you buy online or in a dispensary will almost certainly have less CBD in it, he explains, and will contain other cannabinoids—meaning that it will work differently and will need to be dosed differently. "This is not to say that 'Joe Bob's CBD Blend' definitely isn't going to be effective for pediatric epilepsy, but it means that we need to study it before we know."
A CNN program that featured Charlotte's Web cannabis in 2013 brought increased attention to the use of CBD in the treatment of seizure disorders.[68][69] Since then, 16 states have passed laws to allow the use of CBD products with a doctor's recommendation (instead of a prescription) for treatment of certain medical conditions.[70] This is in addition to the 30 states that have passed comprehensive medical cannabis laws, which allow for the use of cannabis products with no restrictions on THC content.[70] Of these 30 states, eight have legalized the use and sale of cannabis products without requirement for a doctor's recommendation.[70]

Because C. sativa has been a neglected crop for so long in North America, there are only negligible genetic resources available on this continent. Most germplasm stocks of hemp are in Europe, and the largest and most important collection is the Vavilov Institute gene bank in Leningrad. Figure 11 shows THC concentrations in the Vavilov collection, as well as in our own collection, largely of European germplasm. A disturbingly high percentage of the collections have THC levels higher than 0.3%, making it difficult to incorporate these into breeding programs.

Cannabis plants can be male, female, or hermaphrodite. The dried marijuana flowers that humans consume, however, come from the female plant. That’s because female plants produce large resin-secreting flowers that are rich in cannabinoids and free of seeds. Hence, female plants are the ones growers prefer, though of course, male marijuana plants are a requirement for pollination.
Cannabis Indica – The annual plant of the Cannabaceae family is considered a species of the genus Cannabis, but separate from Cannabis sativa, and originating in the Hindu Kush Mountains and suited for cultivation in temperate climates. Used to induce sleep, the plant is described as relatively short and conical with dense branches and short, broad leaves, while Cannabis sativa is tall with fewer branches and long, narrow leaves.
To illustrate how hemp programs can wither without proper support, she pointed to California, where regulators continue struggling to keep up with rules and infrastructure for the more potent (and popular) marijuana industry, from lab tests to license approvals; the state's hemp operators, meanwhile, are still waiting for their official license application to come out.
In 1976, Canadian botanist Ernest Small[65] and American taxonomist Arthur Cronquist published a taxonomic revision that recognizes a single species of Cannabis with two subspecies: C. sativa L. subsp. sativa, and C. sativa L. subsp. indica (Lam.) Small & Cronq.[61] The authors hypothesized that the two subspecies diverged primarily as a result of human selection; C. sativa subsp. sativa was presumably selected for traits that enhance fiber or seed production, whereas C. sativa subsp. indica was primarily selected for drug production. Within these two subspecies, Small and Cronquist described C. sativa L. subsp. sativa var. spontanea Vav. as a wild or escaped variety of low-intoxicant Cannabis, and C. sativa subsp. indica var. kafiristanica (Vav.) Small & Cronq. as a wild or escaped variety of the high-intoxicant type. This classification was based on several factors including interfertility, chromosome uniformity, chemotype, and numerical analysis of phenotypic characters.[51][61][66]
Jump up ^ Hayakawa K, Mishima K, Nozako M, Ogata A, Hazekawa M, Liu AX, Fujioka M, Abe K, Hasebe N, Egashira N, Iwasaki K, Fujiwara M (March 2007). "Repeated treatment with cannabidiol but not Delta9-tetrahydrocannabinol has a neuroprotective effect without the development of tolerance". Neuropharmacology. 52 (4): 1079–87. doi:10.1016/j.neuropharm.2006.11.005. PMID 17320118.
On Oct. 22 and 23, KDA participated in four informational meetings about Industrial Hemp in Manhattan, Salina, Colby and Garden City hosted by Kansas Farmers Union. The presentation shared by KDA at those meetings can be seen here: KDA Industrial Hemp Presentation. Information on the event, including the video of the guest presenter, can be found on the Kansas Farmers Union website. 
A 2015 review found that the use of high CBD-to-THC strains of cannabis showed significantly fewer positive symptoms such as delusions and hallucinations, better cognitive function and both lower risk for developing psychosis, as well as a later age of onset of the illness, compared to cannabis with low CBD-to-THC ratios.[267] A 2014 Cochrane review found that research was insufficient to determine the safety and efficacy to using cannabis to treat schizophrenia or psychosis.[268] As of 2017, the molecular mechanisms for the anti-inflammatory and possible pain relieving effects of cannabis are under preliminary research.[269]
Right now, there’s a good chance that you don’t really know what you’re getting from any source. Testing and labeling rules vary by state, but many states that allow legal cannabis also require some kind of testing to verify that the THC and CBD levels listed on the label are accurate. However, this testing is controversial, and results can vary widely between labs, Jikomes said. A study published in March found measurable variations in test results, with some labs consistently reporting higher or lower levels of cannabinoids than others. There are no guarantees that the label accurately reflects what’s in the product. For a 2015 study published in JAMA, researchers tested 75 products purchased in San Francisco, Los Angeles and Seattle and found that only 17 percent were accurately labeled. More than half of the products contained significantly lower levels of cannabinoids than the label promised, and some of them contained only negligible amounts of the compounds. “We need to come up with ways to confidently verify the composition of cannabis products and make this information available to consumers,” Jikomes said.
“Folks at the various state Departments of Agriculture are so excited to bring in hemp – excited to introduce any crop, really, and especially to reintroduce this extraordinarily versatile one,” Beckerman said. “But they’re not experts; they’re learning like anybody else. So getting in there, looking at proposed legislation and rules to make sure [proposals] actually make sense for the crop – on an agronomic level, on a regulatory level – and monitoring changes to that legislation, regulation, or industry, is common sense.” She went on,
Hemp is completely different from marijuana in its function, cultivation and application. But these differences didn’t stop our political leaders from getting confused and accidentally grouping all Cannabis species as a Schedule I Drug and banning it in 1970 under the Controlled Substances Act. Even after 45 years, the government still seems to have some confusion in distinguishing the two plants. Although legislation is being made, progress has been slow.In its application, hemp and marijuana serve completely different purposes. Marijuana, as it is widely known, is used for medicinal or recreational purposes. Hemp is used in variety of other applications that marijuana couldn’t possibly be used in. These include healthy dietary supplements, skin products, clothing, and accessories. Overall, hemp is known to have over 25,000 possible applications.
The above uses are based on hemp as a mechanical strengthener of materials. Hemp can also be chemically combined with materials. For example, hemp with gypsum and binding agents may produce light panels that might compete with drywall. Hemp and lime mixtures make a high quality plaster. Hemp hurds are rich in silica (which occurs naturally in sand and flint), and the hurds mixed with lime undergo mineralization, to produce a stone-like material. The technology is most advanced in France (Fig. 26). The mineralized material can be blown or poured into the cavities of walls and in attics as insulation. The foundations, walls, floors, and ceilings of houses have been made using hemp hurds mixed with natural lime and water. Sometimes plaster of Paris (pure gypsum), cement, or sand is added. The resulting material can be poured like concrete, but has a texture vaguely reminiscent of cork—much lighter than cement, and with better heat and sound-insulating properties. An experimental “ceramic tile” made of hemp has recently been produced (Fig. 27).
Hemp allows farmers to build a livelihood from a crop that’s both good for the environment and the growers themselves. Hemp puts back nitrogen into the soil. Cotton, on the other hand, can deplete the land’s nutrients, especially if not rotated with other crops. Unlike cotton which produces shorter fibers, hemp, though brittle when dry, thrives when it’s wet, explains Derek Thomas, co-founder of Hemp Blue, a LA-based startup producing hemp-based jeans, jackets, and shirts. The long, wet fibers don’t break, but actually grow in strength, he says. Hemp’s longer, wet fibers have greater durability than cotton, which has short fibers that need to be spun and woven.

The cultivation of hemp in the EU is heavily weighted toward fiber production over oilseed production. In 1999, the EU produced about 27,000 t of hemp fiber, but only about 6,200 t of hemp seeds, mostly in France, and 90% of this was used as animal feed (Karus et al. 2000). The seeds (Fig. 33) have traditionally been employed as bird and poultry feed, but feeding the entire seeds to livestock has been considered to be a poor investment because of the high cost involved (although subsidization in Europe allows such usage, especially in France where hemp seeds are not legally permitted in human food). As pointed out later, higher yield and better harvesting practices may make whole hempseed an economical livestock feed. Moreover, seed cake left after expressing the oil is an excellent feed. Efforts are underway in Europe to add value in the form of processed products for hemp, especially cosmetics and food but, as noted below, the North American market is already quite advanced in oilseed applications.
Hemp does best on a loose, well-aerated loam soil with high fertility and abundant organic matter. Well-drained clay soils can be used, but poorly-drained clay soils are very inappropriate because of their susceptibility to compaction, which is not tolerated. Young plants are sensitive to wet or flooded soils, so that hemp must have porous, friable, well-drained soils. Sandy soils will grow good hemp, provided that adequate irrigation and fertilization are provided, but doing so generally makes production uneconomical. Seedbed preparation requires considerable effort. Fall plowing is recommended, followed by careful preparation of a seedbed in the spring. The seedbed should be fine, level, and firm. Seed is best planted at 2–3 cm (twice as deep will be tolerated). Although the seedlings will germinate and survive at temperatures just above freezing, soil temperatures of 8°–10°C are preferable. Generally hemp should be planted after danger of hard freezes, and slightly before the planting date of maize. Good soil moisture is necessary for seed germination, and plenty of rainfall is needed for good growth, especially during the first 6 weeks. Seeding rate is specific to each variety, and this information should be sought from the supplier. Fiber strains are typically sown at a minimum rate of 250 seeds per m2 (approximately 45 kg/ha), and up to three times this density is sometimes recommended. In western Europe, seeding rates range from 60–70 kg/ha for fiber cultivars. Recommendations for seeding rates for grain production vary widely, from 10–45 kg/ha. Densities for seed production for tall, European, dual-purpose cultivars are less than for short oilseed cultivars. Low plant densities, as commonly found in growing tall European cultivars for seed, may not suppress weed growth adequately, and under these circumstances resort to herbicides may pose a problem for those wishing to grow hempseed organically. Hemp requires about the same fertility as a high-yielding crop of wheat. Industrial hemp grows well in areas that corn produces high yields. Growing hemp may require addition of up to 110 kg/ha of nitrogen, and 40–90 kg/ha of potash. Hemp particularly requires good nitrogen fertilization, more so for seed production than fiber. Adding nitrogen when it is not necessary is deleterious to fiber production, so that knowledge of the fertility of soils being used is very important. Organic matter is preferably over 3.5%, phosphorus should be medium to high (>40 ppm), potassium should be medium to high (>250 ppm), sulfur good (>5,000 ppm), and calcium not in excess (<6,000 ppm).
Separate levels of evidence scores are assigned to qualifying human studies on the basis of statistical strength of the study design and scientific strength of the treatment outcomes (i.e., endpoints) measured. The resulting two scores are then combined to produce an overall score. An overall level of evidence score cannot be assigned to cannabinoids because there has been insufficient clinical research. For an explanation of possible scores and additional information about levels of evidence analysis of CAM treatments for people with cancer, refer to Levels of Evidence for Human Studies of Integrative, Alternative, and Complementary Therapies.
^ Jump up to: a b c d Campos AC, Moreira FA, Gomes FV, Del Bel EA, Guimarães FS (December 2012). "Multiple mechanisms involved in the large-spectrum therapeutic potential of cannabidiol in psychiatric disorders". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences (Review). 367 (1607): 3364–78. doi:10.1098/rstb.2011.0389. PMC 3481531. PMID 23108553.
A panellized system of hemp-lime panels for use in building construction is currently under test in a European Union-funded research collaboration led by the University of Bath. The panels are being designed to assure high-quality construction, rapid on-site erection, optimal hygrothermal performance from day one, and energy- and resource-efficient buildings. The 36-month-long work programme aims to refine product and manufacturing protocols, produce data for certification and marketing, warranty, insurance cover, and availability of finance. It also includes the development of markets in Britain, France, and Spain.[32]
×