With respect to fiber, a “composite” is often defined as a material consisting of 30%–70% fiber and 70%–30% matrix (Bolton 1995). However, in North America particleboards and fiberboards, which generally contain less than 10% adhesive or matrix, are sometimes referred to as composites. This section addresses plastic-type composites. In plastics, fibers are introduced to improve physical properties such as stiffness, impact resistance, bending and tensile strength. Man-made fibers of glass, kevlar and carbon are most commonly used today, but plant fibers offer considerable cost savings along with comparable strength properties.
When privacy isn’t a requirement, outdoor cannabis grows can provide many advantages over indoor operations. Sunlight is the single most important factor for successful outdoor marijuana growing. It’s important to choose a plot with total sunshine throughout the day. Therefore, cannabis growers in the northern hemisphere will want plots with southern exposure, exposing marijuana plants to the sun’s arc across the sky.
Based on studies of sex reversal in hemp, it was first reported by K. Hirata in 1924 that an XY sex-determination system is present. At the time, the XY system was the only known system of sex determination. The X:A system was first described in Drosophila spp in 1925. Soon thereafter, Schaffner disputed Hirata's interpretation, and published results from his own studies of sex reversal in hemp, concluding that an X:A system was in use and that furthermore sex was strongly influenced by environmental conditions.
Based on world production of fibers in 1999, about 54.5% was synthetic (of which 60.3% was polyester), 42.9% was plant fiber (of which 78.5% was cotton), and 2.6% was wool (Karus 2000). In addition to cotton, flax is the only other significant plant fiber crop grown in temperate regions of the world (kenaf has received some enthusiastic backing in the southern US in recent years, but is most cheaply produced in India, Bangladesh, and China). Flax held 2.7% of the world plant fiber market in 1999, while hemp had only 0.3% (Karus 2000). Hemp fiber can potentially replace other biological fibers in many applications, but also, as noted below, can sometimes compete with minerals such as glass fiber and steel. As forests diminish, cultivation of annual plants as fiber sources is likely to increase. While crop residues like cereal straw will probably supply much of the need, specialty fiber plants such as hemp also have potential. The four conditions that will need to be met are (after Bolton 1995): (1) the material should be produced at a large enough scale; (2) the price should be low enough; (3) the fiber characteristics should be adequate for the end use; and (4) proven technology should be available for the processing of the new raw material. Of these criteria only point 3 is adequately met at this time for hemp in North America, but this is to be expected in a crop that has only begun to be cultivated after an absence of many years.
A chief argument that has been advanced in favor of developing hemp as a paper and pulp source has been that as a non-wood or tree-free fiber source, it can reduce harvesting of primary forests and the threat to associated biodiversity. It has been claimed that hemp produces three to four times as much useable fiber per hectare per annum as forests. However, Wong (1998) notes evidence that in the southern US hemp would produce only twice as much pulp as does a pine plantation (but see discussion below on suitability of hemp as a potential lumber substitute in areas lacking trees).
Home Curriculum Commodities & Products FoodSearcher Tool Agritourism Agritourism Profile Clay-Target Shooting Facilities Equine Agritourism Fee and Lease Pond Fishing Game Birds Hunting Leases Nature-Based Tourism Rural Weddings Wine Tours Agroforestry Agroforestry Profile Non-traditional Forest Products Christmas Trees Nursery Trees Aquaculture Aquaculture Profile Aquaponics Aquaculture Non-Fish Species Aquaculture Fin Fish Species Biomass Biomass Profile Manure Digester Biogas General Biomass Hay Miscanthus profile Sawdust Switchgrass Fiber Fiber Profile Cotton Industrial Hemp Kenaf Forestry Agroforestry Forestry Profile Christmas Trees Nursery Trees Fruits Wine Apples Apricots Aronia Berries Avocados Blackberries Blueberries Cherimoya Cherries Cranberries Dates Dragon Fruit Figs Gooseberry Grapes Guava Kiwi Lychee Mangos Mulberries Nectarines Olives Pawpaw Peaches Pears Persimmon Plums Pomegranates Quince Raisins Raspberries Strawberries Kiwi Grains & Oilseeds Camelina Chufa Niche Corn Opportunities Meadowfoam Mustard Organic Soy Pennycress Proso Millet Quinoa Rapeseed Safflower Egyptian Wheat (Sorghum) Spelt Sorghum Sunflower Profile Triticale Livestock Beef Bees Dairy Deer (Venison) Ranching Goats Lamb Ostrich & Emu Pork Poultry Rabbits Worms Nuts Almonds Black Walnuts Chestnuts English Walnuts Hazelnuts Pecans Pine Nuts Pistachios Peanuts Macadamia Nuts Specialty Crops Amaranth Buckwheat Herbs Floriculture Maple Syrup Profile Mushrooms Profile Russian Dandelion Tobacco Vegetables Artichokes Asparagus Azuki Beans Bell and Chili Peppers Broccoli Cabbage Carrots Cauliflower Celery Chickpeas Eggplant Garlic Garlic Profile Lettuce Melons Onions Potato Profile Pumpkins Spinach Squash Sweet Corn Sweet Potatoes Tomatoes Watermelon Markets & Industries Energy Fiber Food BizMiner Reports for Food Sectors Business Development Getting Prepared Value-added Agriculture Business Skills Business and Economic Concepts and Principles Starting a Business Market/Business Assessment Creating a Business Raising Money Special Types of Businesses Operating a Business Marketing Direct Marketing Promotion Legal Budgeting Finance Regulatory Management Business Strategy and Analysis Expansion and Strategy Analysis Business Workbench Business Worksheets and Calculators Analysis Worksheets and Calculators Business Calculators Renewable Energy Renewable Energy Report Prices and Profitability Models Energy Energy - Overview Energy - Outlook Energy - Industry Analysis Energy - Related Websites and News Sources Renewable Energy Renewable Energy - Industry Analysis Renewable Energy - Community Impacts Renewable Energy - Related Websites and News Sources Solar Energy Profile Wind Energy Profile Biofuels/ Biorefining Biofuels/Biorefining - Industry Analysis Biofuels/Biorefining - Finance/Legal Biofuels/Biorefining - Community Impacts Biofuels/Biorefining - Policy Biofuels/Biorefining - Impact on Agricultural Sector Biofuels/Biorefining - Related Websites and News Sources Ethanol Ethanol - Industry Analysis Ethanol - Prices, Trends and Markets Ethanol - Profitability Ethanol - Co-Products Ethanol - Impact on Agricultural Sector Ethanol - Related Websites and News Sources Ethanol - Finance and Legal Ethanol Profile Biodiesel Biodiesel - Industry Analysis Biodiesel - Prices, Trends and Markets Biodiesel - Related Websites and News Sources Biodiesel - Profitability Biodiesel Profile Biomass (energy production) Biomass - Industry Analysis Biomass - Technology Biomass - Related Websites and News Sources Biomass - Legal and Finance Feedstocks (biofuels) General Information Annual Crops Perennial Grasses Trees and Wood Feedstocks - Related Websites and News Sources Energy Efficiency Energy Efficiency - Related Websites and News Sources Farm Energy Efficiency Home Energy Efficiency Energy Calculators Farm Alternative Energy Climate Change Climate Change and Agriculture Directories & State Resources AgMRC Value-added Directories State Resources USDA Related Directories Related Directories News & Media Radio Spots AgMRC Videos Press Releases Conference About Us Contact Us FoodMarketMarker.com
Under federal law, cannabis (from which both CBD and marijuana are derived) is illegal everywhere, although the laws against it aren’t generally enforced in states that have legalized marijuana. Some manufacturers claim that CBD culled from legally imported industrial hemp, which has little to no THC, is fine to ship across the U.S., but many experts disagree, noting that because hemp comes from the same species as marijuana, cannabis sativa, all CBD falls under the DEA’s Schedule 1 designation. “This creative interpretation of the law runs afoul of reality,” says the Brookings Institution, a Washington, DC, think tank.
Do not use cannabis if you are pregnant or could become pregnant. There is some evidence that women who smoke cannabis during the time of conception or while pregnant may increase the risk of their child being born with birth defects. Pregnant women who continue to smoke cannabis are probably at greater risk of giving birth to low birthweight babies.
Jump up ^ Juliet Eilperin (February 11, 2013), "'Good seed' versus 'evil weed': Hemp activists eye legalization", The Washington Post – via The Japan Times Online, [A] couple of factors — the high taxes the federal government imposed on growing hemp in the late 1930s and again in the early '50s, and then the DEA's interpretation of the 1970 law — made producing hemp nearly impossible. Since the DEA only grants permits in rare instances and demands costly, elaborate security precautions, large-scale hemp growing in the United States is not viable.
You cannot have a fatal overdose from cannabis use. However, if you have too much in one session it can lead to a very unpleasant experience. Anxiety and panic attacks, disorientation, and inability to focus are all signs you have had too much. Other negative effects from taking too much include loss of coordination, shortness of breath, increased heart rate and shaking, chills and sweats.
PDQ is a registered trademark. Although the content of PDQ documents can be used freely as text, it cannot be identified as an NCI PDQ cancer information summary unless it is presented in its entirety and is regularly updated. However, an author would be permitted to write a sentence such as “NCI’s PDQ cancer information summary about breast cancer prevention states the risks succinctly: [include excerpt from the summary].”
Research suggests that CBD may exert some of its pharmacological action through its inhibition of fatty acid amide hydrolase (FAAH), which may in turn increase the levels of endocannabinoids, such as anandamide, produced by the body. It has also been speculated that some of the metabolites of CBD have pharmacological effects that contribute to the biological activity of CBD.
I strongly agree they really are greedy and money hungry. Isn’t it always funny how the big ones fall sooner or later? The government can’t have everything, there are just some things that belong to the people. Medicine plants in general have been around since the start of creation, and it looks like we’re just finding out which ones they are. Our forefathers know which ones they were and they knew how to use them but it’s been a forgotten skill some generations have forgotten since modern medicine took over. That’s not right. I saw some articles where the government was going to try to once again outlaw hemp and cannabis. I say if you really want some before it’s outlawed, grab up as much as you can and hide it somewhere good where no one but you can ever find it. I would highly recommend putting it in an airtight container with as many other airtight layers around it as possible. That way, it will never be found by anyone who’s not supposed to find it. The best advantage is to have enough handy to take care of yourself for life while everyone not in on ditching big Pharma is dying. If hamper and cannabis are outlawed, only the elite will be the ones still standing in the end
I have sporadic back spasms for year I see a chiropractor monthly for maintenance (it help) and deal with daily Knee & hip joint pain due to my job (heavy mechanic/steel work with lots of walking). after reading all the great reviews on CBD oil I want to get off the daily ibuprofen regiment and try CBD oil. I would like to try it as a gel cap but would like some advise on dosage size. I also want to know how often I should take the CBD treatments. any and all advise is appreciated
Public heath insurance programs would be required to cover medical marijuana in New York if a new Assembly bill is enacted. “Cost is the primary barrier to patient access in New York’s medical marijuana program,” reads a memo attached to the legislation. “Medicaid, other public health plans, and commercial health insurance plans do not cover … Continue reading New York Bill Would Require Medical Marijuana Be Covered By Public Health Insurance
Hi Colleen, it's almost a year later and I'm wondering how you're doing. I'm experiencing a recurrence of Stage 3 ovarian, originally diagnosed in 2011. I've decided to get some chemo, not sold on another 6 cycles though. As a new MMJ patient, I'm still going to go through with Rick Simpson Oil (THC+CBD,) and I just joined a program with my local dispensary to get CBD capsules for $2 each when I order them at least 30 at a time. I hope you're doing well!! I'm off to do more research on dosing. **NOTE: If you have ANY experience with CBD treatment of ovarian cancer, PLEASE respond. Thank you!!
Whether the drug and non-drug, cultivated and wild types of Cannabis constitute a single, highly variable species, or the genus is polytypic with more than one species, has been a subject of debate for well over two centuries. This is a contentious issue because there is no universally accepted definition of a species. One widely applied criterion for species recognition is that species are "groups of actually or potentially interbreeding natural populations which are reproductively isolated from other such groups." Populations that are physiologically capable of interbreeding, but morphologically or genetically divergent and isolated by geography or ecology, are sometimes considered to be separate species. Physiological barriers to reproduction are not known to occur within Cannabis, and plants from widely divergent sources are interfertile. However, physical barriers to gene exchange (such as the Himalayan mountain range) might have enabled Cannabis gene pools to diverge before the onset of human intervention, resulting in speciation. It remains controversial whether sufficient morphological and genetic divergence occurs within the genus as a result of geographical or ecological isolation to justify recognition of more than one species.
Today, 30 countries around the world allow farmers to grow industrial hemp, China being the largest producer and exporter. Canada, which produces hemp for food and toiletries, legalized the crop in 1996. The US, on the other hand, has restricted hemp production and categorized hemp in Schedule 1 of the Controlled Substances Act, attributing it as a relative of marijuana.
Right now, there’s a good chance that you don’t really know what you’re getting from any source. Testing and labeling rules vary by state, but many states that allow legal cannabis also require some kind of testing to verify that the THC and CBD levels listed on the label are accurate. However, this testing is controversial, and results can vary widely between labs, Jikomes said. A study published in March found measurable variations in test results, with some labs consistently reporting higher or lower levels of cannabinoids than others. There are no guarantees that the label accurately reflects what’s in the product. For a 2015 study published in JAMA, researchers tested 75 products purchased in San Francisco, Los Angeles and Seattle and found that only 17 percent were accurately labeled. More than half of the products contained significantly lower levels of cannabinoids than the label promised, and some of them contained only negligible amounts of the compounds. “We need to come up with ways to confidently verify the composition of cannabis products and make this information available to consumers,” Jikomes said.
Industrial hemp is from the plant species Cannabis sativa and has been used worldwide to produce a variety of industrial and consumer products. Hemp is a source of fiber and oilseed grown in more than 30 nations. In the United States production is controlled under drug enforcement laws. To produce industrial hemp in the United States the grower must obtain a permit from the Drug Enforcement Agency (DEA).
Hemp rope was used in the age of sailing ships, though the rope had to be protected by tarring, since hemp rope has a propensity for breaking from rot, as the capillary effect of the rope-woven fibers tended to hold liquid at the interior, while seeming dry from the outside. Tarring was a labor-intensive process, and earned sailors the nickname "Jack Tar". Hemp rope was phased out when Manila, which does not require tarring, became widely available. Manila is sometimes referred to as Manila hemp, but is not related to hemp; it is abacá, a species of banana.
Can CBD oil help anxiety? Cannabidiol (CBD) is a chemical occurring in cannabis plants. It is possible to add CBD oil to food, and an increasing amount of evidence suggests that it may improve mental health, particularly anxiety. It does not seem to have adverse side effects, but CBD oil is illegal in some states. Learn more about CBD oil here. Read now
CBD vaporizer oils can be used in a vaporizer of your choice. They offer a healthy way of inhaling your daily dose of the CBD supplement. Vaping is a very direct way of ingesting CBD oil. When you vape, the CBD enters the lungs and goes directly into the bloodstream, completely bypassing the digestive system. This method allows for greater bioavailability.
CBD interacts with the body through the endogenous cannabinoid system (ECS) or endocannabinoid system. First discovered in the late 1980’s, the endocannabinoid system regulates the body’s homeostasis, or general state of balance, impacting such functions as mood, sleep, appetite, hormone regulation, and pain and immune response. Like an acrobat on a highwire, as the environment around us impacts our normal balance, the endocannabinoid system “corrects” by mediating our body’s reaction to keep us level.
The way I see it, the marriage of China’s position as the world’s supplier of hemp -- and its burgeoning semiconductor industry -- could be the key to China’s hegemony over the microchip industry. Semiconductors are traditionally made using silicon. Graphene semiconductors, however, could one day lead to computers that are a thousand times faster, consume significantly less power and are smaller than silicon semiconductors used in computer transistors. In application, graphene’s dwindling supply and costly manufacturing issues would still exist. Putting this all together, Mitlin’s research has sparked interest in the potential for hemp to create the next-generation semiconductor.
In the end, companies like HempMedsPx are asking consumers simply to trust them. CBD oils are never subjected to systematic testing by any U.S. regulatory body. The FDA regulates all pharmaceutical labs in the country. But cannabis labs like the ones that HempMedsPx and others use are not, because cannabis is not federally recognized as a legal drug.
Spring Hope, NC, Nov. 13, 2018 (GLOBE NEWSWIRE) -- via NEWMEDIAWIRE -- Hemp, Inc. (OTC PINK: HEMP), a global leader in the industrial hemp industry with bi-coastal processing centers including the largest multipurpose industrial hemp processing facility in the western hemisphere (in Spring Hope, North Carolina), announced today that the company is one of the largest sponsors for the 4th Annual Jack Herer Cup on November 15, 2018. At the event, Hemp, Inc. CEO Bruce Perlowin will receive an award for being a trailblazer in the hemp industry. To learn more about the 4th Annual Jack Herer Cup or to RSVP, click here.
Hemp is used in a variety of products we carry. The industrial hemp seed that is used in the products we carry today is not marijuana, although the two are from the same species (Cannabis Sativa). Hemp seeds are sterilized, removing any traces of THC – the mind-altering compound found in the drug. Industrial hemp can be grown with relatively little fertilizer and without the pesticides that have been known to pollute ground water and river systems.
“Geotextiles” or “agricultural textiles” include (1) ground-retaining, biodegradable matting designed to prevent soil erosion, especially to stabilize new plantings while they develop root systems along steep highway banks to prevent soil slippage (Fig. 32); and (2) ground-covers designed to reduce weeds in planting beds (in the manner of plastic mulch). At present the main materials used are polymeric (polythene, spun-blown polypropylene) and some glass fiber and natural fibers. Both woven and non-woven fibers can be applied to geotextiles; woven and knitted materials are stronger and the open structure may be advantageous (e.g. in allowing plants to grow through), but non-wovens are cheaper and better at suppressing weeds. Flax and hemp fibers exposed to water and soil have been claimed to disintegrate rapidly over the course of a few months, which would make them unacceptable for products that need to have long-term stability when exposed to water and oil. Coco (coir) fiber has been said to be much more suitable, due to higher lignin content (40%–50%, compared to 2%–5% in bast fibers); these are much cheaper than flax and hemp fibers (Karus et al. 2000). However, this analysis does not do justice to the developing hemp geotextile market. Production of hemp erosion control mats is continuing in both Europe and Canada. Given the reputation for rot resistance of hemp canvas and rope, it seems probable that ground matting is a legitimate use. Moreover, the ability to last outdoors for many years is frequently undesirable in geotextiles. For example, the widespread current use of plastic netting to reinforce grass sod is quite objectionable, the plastic persisting for many years and interfering with lawn care. Related to geotextile applications is the possibility of using hemp fiber as a planting substrate (biodegradable pots and blocks for plants), and as biodegradable twine to replace plastic ties used to attach plants to supporting poles. Still another consideration is the “green ideal” of producing locally for local needs; by this credo, hemp is preferable in temperate regions to the use of tropical fibers, which need to be imported.
Those warning letters aside, there’s not a lot of federal oversight right now over the claims being made or the products that are being sold. Cohen warned against buying CBD products online, because “there’s a lot of scams out there.” Yet his clinic sells CBD, and he admits, “I say ‘Don’t buy online,’ but ours is worth doing, because we know what we’re doing. We ship all over.”
Jump up ^ Datwyler, SL; Weiblen, GD (2006). "Genetic Variation in Hemp and marijuana (Cannabis sativa L.) sativa plants are taller and less dense. Indica plants are shorter but a lot more dense than sativas. According to Amplified Fragment Length Polymorphisms". Journal of Forensic Sciences. 51 (2): 371–375. doi:10.1111/j.1556-4029.2006.00061.x. PMID 16566773.
The high lipid-solubility of cannabinoids results in their persisting in the body for long periods of time. Even after a single administration of THC, detectable levels of THC can be found in the body for weeks or longer (depending on the amount administered and the sensitivity of the assessment method). A number of investigators have suggested that this is an important factor in marijuana's effects, perhaps because cannabinoids may accumulate in the body, particularly in the lipid membranes of neurons.
Still, as the saying goes, absence of evidence isn’t necessarily evidence of absence, and there’s a reason we don’t have a ton of solid research on CBDs yet — “to study it, we need a good source, ” said Ziva Cooper, who is an associate professor at Columbia University and was on the National Academies committee. CBD is hard to get because it’s still technically a Schedule I drug, which limits its availability, Cooper said.
At least 38 states considered legislation related to industrial hemp in 2018. These bills ranged from clarifying existing laws to establishing new licensing requirements and programs. At least 5 states – Alaska, Arizona, Kansas, Missouri and Oklahoma – enacted legislation in 2018 establishing hemp research and industrial hemp pilot programs. Georgia adopted a resolution to create the House Study Committee on Industrial Hemp Production. States, already allowing for industrial hemp programs, continued to consider policies related to licensure, funding, seed certification, and other issues. For example, Tennessee amended its Commercial Feed Law to include hemp.
Cannabis use for medicinal purposes dates back at least 3,000 years.[1-5] It was introduced into Western medicine in 1839 by W.B. O’Shaughnessy, a surgeon who learned of its medicinal properties while working in India for the British East India Company. Its use was promoted for reported analgesic, sedative, anti-inflammatory, antispasmodic, and anticonvulsant effects.
The gateway effect may appear due to social factors involved in using any illegal drug. Because of the illegal status of cannabis, its consumers are likely to find themselves in situations allowing them to acquaint with individuals using or selling other illegal drugs. Utilizing this argument some studies have shown that alcohol and tobacco may additionally be regarded as gateway drugs; however, a more parsimonious explanation could be that cannabis is simply more readily available (and at an earlier age) than illegal hard drugs. In turn alcohol and tobacco are easier to obtain at an earlier point than is cannabis (though the reverse may be true in some areas), thus leading to the "gateway sequence" in those individuals since they are most likely to experiment with any drug offered.
APPLICATIONS ARE NOW AVAILABLE for the 2019 Industrial Hemp Research Pilot Program. You can access the Grower Application Packet, the Processor/Handler Application Packet, and the University/College Affiliation Application Packet on the Program Page titled "Applications for the Hemp Program" in the right side bar (or scroll further down on mobile devices) or through the green link in the description below. Complete instructions and guidelines for applicants are contained in the application packets. Grower applications are due November 30, 2018 at 4:30 PM Eastern Time.
According to the United Nations Office on Drugs and Crime (UNODC), "the amount of THC present in a cannabis sample is generally used as a measure of cannabis potency." The three main forms of cannabis products are the flower, resin (hashish), and oil (hash oil). The UNODC states that cannabis often contains 5% THC content, resin "can contain up to 20% THC content", and that "Cannabis oil may contain more than 60% THC content."
Cannabis Ruderalis – Thought to be a cannabis species originating in central Asia, it flowers earlier, is much smaller, and can withstand much harsher climates than either Cannabis indica or Cannabis sativa. This species purportedly buds based on age rather than changes in length of daylight, known as auto-flowering. It’s used primarily for food production, such as hemp seeds and hemp seed oil.
Dosage is important, because CBD can have side effects—the most common are tiredness, diarrhea, and changes in appetite and weight—so it’s best not to take more than you need. As CBD becomes more prevalent, says J. Michael Bostwick, M.D., a psychiatrist at Mayo Clinic in Rochester, MN, “I’m reasonably certain new kinds of side effects will emerge.”
Germplasm for the improvement of hemp is vital for the future of the industry in North America. However, there are no publicly available germplasm banks housing C. sativa in North America. The hundreds of seed collections acquired for Small’s studies (reviewed in Small 1979) were destroyed in 1980 because Canadian government policy at that time envisioned no possibility that hemp would ever be developed as a legitimate crop. An inquiry regarding the 56 United States Department of Agriculture hemp germplasm collections supplied to and grown by Small and Beckstead (1973) resulted in the reply that there are no remaining hemp collections in USDA germplasm holdings, and indeed that were such to be found they would have to be destroyed. While hemp has been and still is cultivated in Asia and South America, it is basically in Europe that germplasm banks have made efforts to preserve hemp seeds. The Vavilov Institute of Plant Research in St. Petersburg, Russia has by far the largest germplasm collection of hemp of any public gene bank, with about 500 collections. Detailed information on the majority of hemp accessions of the Vavilov Institute can be found in Anon. (1975). Budgetary problems in Russia have endangered the survival of this invaluable collection, and every effort needs to be made to find new funding to preserve it. Maintenance and seed generation issues for the Vavilov hemp germplasm collection are discussed in a number of articles in the Journal of the International Hemp Association (Clarke 1998b; Lemeshev et al. 1993, 1994). The Gatersleben gene bank of Germany, the 2nd largest public gene bank in Europe, has a much smaller Cannabis collection, with less than 40 accessions (detailed information on the hemp accessions of the Gatersleben gene bank are available at fox-serv.ipk-gatersleben.de/). Because hemp is regaining its ancient status as an important crop, a number of private germplasm collections have been assembled for the breeding of cultivars as commercial ventures (de Meijer and van Soest 1992; de Meijer 1998), and of course these are available only on a restricted basis, if at all.
While cultivating marijuana’s non-intoxicating cousin is currently illegal in the U.S. outside of exceptions for state-approved hemp research programs authorized under the 2014 Farm Bill, there’s a strong possibility that industrial hemp will be broadly legalized—possibly by the end of the year—once the House and Senate reconcile their versions of a new Farm Bill and put it on the president’s desk.
Some jurisdictions use free voluntary treatment programs and/or mandatory treatment programs for frequent known users. Simple possession can carry long prison terms in some countries, particularly in East Asia, where the sale of cannabis may lead to a sentence of life in prison or even execution. Political parties, non-profit organizations, and causes based on the legalization of medical cannabis and/or legalizing the plant entirely (with some restrictions) have emerged in such countries as China and Thailand.
About half of the world market for hemp oil is currently used for food and food supplements (de Guzman 2001). For edible purposes, hempseed oil is extracted by cold pressing. Quality is improved by using only the first pressing, and minimizing the number of green seeds present. The oil varies in color from off-yellow to dark green. The taste is pleasantly nutty, sometimes with a touch of bitterness. Hemp oil is high in unsaturated fatty acids (of the order of 75%), which can easily oxidize, so it is unsuitable for frying or baking. The high degree of unsaturation is responsible for the extreme sensitivity to oxidative rancidity. The oil has a relatively short shelf life. It should be extracted under nitrogen (to prevent oxidation), protected from light by being kept in dark bottles, and from heat by refrigeration. Addition of anti-oxidants prolongs the longevity of the oil. Steam sterilization of the seeds, often required by law, allows air to penetrate and so stimulates rancidity. Accordingly, sterilized or roasted hemp seeds, and products made from hemp seed that have been subjected to cooking, should be fresh. The value of hemp oil from the point of view of the primary components is discussed below. In addition, it has been suggested that other components, including trace amounts of terpenes and cannabinoids, could have health benefits (Leizer et al. 2000). According to an ancient legend (Abel 1980), Buddha, the founder of Buddhism, survived a 6-year interval of asceticism by eating nothing but one hemp seed daily. This apocryphal story holds a germ of truth—hemp seed is astonishingly nutritional.
For profitable hemp farming, particularly deep, humus-rich, nutrient-rich soil with controlled water flow is preferable. Waterlogged acidic, compressed or extremely light (sandy) soils primarily affect the early development of plants. Steep and high altitudes of more than 400 m above sea level are best avoided. Hemp is relatively insensitive to cold temperatures and can withstand frost down to −5 °C. Seeds can germinate down to 1–3 °C. Hemp needs a lot of heat, so earlier varieties come to maturation. The water requirement is 300–500 l/kg dry matter. This is around 1/14th that of cotton, which takes between 7,000 and 29,000 l/kg, according to WWF. Roots can grow up to 3 feet into the soil and use water from deeper soil layers.