Marijuana has in fact been grown for medicinal research in North America by both the Canadian (Fig. 40) and American governments, and this will likely continue. The possibility of marijuana becoming a legal commercial crop in North America is, to say the least, unlikely in the foreseeable future. Nevertheless the private sector is currently producing medicinal marijuana in Europe and Canada, so the following orientation to marijuana as a potential authorized crop is not merely academic.

Each and every bottle is grown and processed with the same standards as the last guaranteeing quality and assuring potency. Made from CBD rich hemp flower sun grown in Oregon and MCT oil, Rosebud is proud to be a Vegan, Gluten Free, Non-GMO, Organic, and Sustainably Processed CO2 extract. Choose between our three potencies: 350mg, 700mg and 1000mg. 
Cannabis is indigenous to Central Asia and Indian subcontinent,[183] and its use for fabric and rope dates back to the Neolithic age in China and Japan.[184][185] It is unclear when cannabis first became known for its psychoactive properties; some scholars suggest that the ancient Indian drug soma, mentioned in the Vedas, was cannabis, although this theory is disputed.[186]
My Wife had Polio at age 5 and the lingering damage to the L leg and muscle drove her crazy. At age 21 she was using heavy doses of muscle relaxers and pain meds. Needed to bomb herself at night to get some sleep. A Post polio group in West Palm Beach told her about Marijuana and she got some from the Jamaican health aide that was her constant helper. After 5 months she quit all meds. All of them. Slowly came out of the drugged state the meds had caused from 15 years of use. We separated good friends and I know she has gone back to school and getting a degree. All from the help of a plant from Jamaica. I never understood the statement this plant has no viable medical value. Something smells in the politics of this prohibition. Shame.
Heavy, long term exposure to marijuana may have biologically-based physical, mental, behavioral and social health consequences and may be "associated with diseases of the liver (particularly with co-existing hepatitis C), lungs, heart, and vasculature".[79] It is recommended that cannabis use be stopped before and during pregnancy as it can result in negative outcomes for both the mother and baby.[80][81] However, maternal use of marijuana during pregnancy does not appear to be associated with low birth weight or early delivery after controlling for tobacco use and other confounding factors.[82] A 2014 review found that while cannabis use may be less harmful than alcohol use, the recommendation to substitute it for problematic drinking is premature without further study.[83] Other side effects include cannabinoid hyperemesis syndrome.[84]

I discovered in my research that hemp is really legal in all 50 states so I guess this must be a very complicated thing. It may be likely some states are allowed to grow it and others aren’t, I don’t know but all I know is somewhere in my research it said it was legal in all 50 states. Anyway, I got my oil on auto delivery, I really need to start using it in my food a little more often to help with certain health issues including but not limited to arthritis pain 😇👍
I have crohns dibeates 2 stage kidney failure I take 6000 mg of chemicals a day when I get a flair l might lose a lot of blood I've had fistula surgery once darn mean killed me 2 more just gut surgerys little bit of gut removed I tease my gut doctor he schoold just put in a zipper any way I'm looking for something natural to try for pain also where I live if you get caught automatic life so the delima begins how much would any one suggest starting out with thanks for your time also compared to most of the folks mine seems like a minor problem on this site but I would appreciate some advice I hope all you folks have good lives and remember god always loves you even though sometimes you think he may have forgotten you

There is also considerable potential for other industries using hemp in the manner that the automobile industry has demonstrated is feasible. Of course, all other types of transportation vehicles from bicycles to airplanes might make use of such technology. Natural fibers have considerable advantages for use in conveyance (Karus et al. 2000): low density and weight reduction, favorable mechanical, acoustical, and processing properties (including low wear on tools), no splintering in accidents, occupational health benefits (compared to glass fibers), no off-gassing of toxic compounds, and price advantages. Additional types of composite using hemp in combination with other natural fibers, post-industrial plastics or other types of resins, are being used to produce non-woven matting for padding, sound insulation, and other applications.


Full spectrum CBD does, however, bring with it the sticky issue of THC. The government regulates concentration levels of THC at 0.3 percent, an amount which results in minimal psychoactivity. But THC metabolites are stored in the fat cells of your body, building up over time. If you ever need to take a drug test, this could create an issue for you.
In the mid 1990s, the EU provided subsidization for hemp cultivation of ca. $1,050/ha. This support was instrumental in developing a hemp industry in western Europe. However, no comparable support is available in North America, and indeed those contemplating entering into hemp cultivation are faced with extraordinary costs and/or requirements in connection with licensing, security, THC analysis, and record keeping. Those involved in value-added processing and distribution are also faced with legal uncertainties and the regular threat of idiosyncratic, indeed irrational actions of various governments. Simply displaying a C. sativa leaf on advertising has led to the threat of criminal charges in the last decade in several G8 countries. Attempting to export or import hemp products among countries is presently a most uncertain activity.
^ Jump up to: a b Weinstein A, Livny A, Weizman A (2016). "Brain Imaging Studies on the Cognitive, Pharmacological and Neurobiological Effects of Cannabis in Humans: Evidence from Studies of Adult Users". Current Pharmaceutical Design. 22 (42): 6366–6379. doi:10.2174/1381612822666160822151323. PMID 27549374. 1)The studies reviewed so far demonstrated that chronic cannabis use has been associated with a volume reduction of the hippocampus...3)The overall conclusion arising from these studies is that recent cannabis users may experience subtle neurophysiological deficits while performing on working memory tasks, and that they compensate for these deficits by "working harder" by using additional brain regions to meet the demands of the task.
Canabidol™ Oral Capsules deliver 100% Cannabis Sativa L. from specifically bred industrial hemp plants containing high potency Cannabidiol. Each CBD capsule contains all the Cannabinoids, terpenoids, essential oils and all the other compounds of the cannabis plant. A packet of 30 capsules contains 15,000mg of Cannabis Sativa L. and 300mg of CBD (Cannabidiol) Each capsule contains 500mg of Cannabis Sativa L. and 10mg of the active ingredient CBD
Kent, My mother has suffered from severe migraines since she was a child. Six weeks ago, she received the hemp oil tincture (I do not know what dosage). She does not take it daily. She rubs a drop or two on her temples at the start of a migraine. The drops worked more effectively for her than her medication did, and now that is all she uses. Hope this helps.
Cultivated in at least 30 countries, monikers for the hemp plant often allude to its origin or use, such as Manila hemp (abacá, Musa textilis), sisal hemp (Agave sisalana), Indian hemp (Apocynumcannabinum) and New Zealand hemp (Phormiumtenax). Worldwide, hemp seed production alone has soared from around 33,000 metric tons in the late ’90s to more than 100,000 metric tons annually between 2005 and 2011.

"Industrial hemp" means a fiber or oilseed crop, or both, that is limited to types of the plant Cannabis sativa L. having no more than three-tenths of 1 percent tetrahydrocannabinol (THC) contained in the dried flowering tops, whether growing or not; the seeds of the plant; the resin extracted from any part of the plant; and every compound, manufacture, salt, derivative, mixture, or preparation of the plant, its seeds or resin produced therefrom.
Cannabis is predominantly dioecious,[12][14] having imperfect flowers, with staminate "male" and pistillate "female" flowers occurring on separate plants.[15] "At a very early period the Chinese recognized the Cannabis plant as dioecious",[16] and the (c. 3rd century BCE) Erya dictionary defined xi 枲 "male Cannabis" and fu 莩 (or ju 苴) "female Cannabis".[17] Male flowers are normally borne on loose panicles, and female flowers are borne on racemes.[18]
In addition, both plant-derived and endogenous cannabinoids have been studied for anti-inflammatory effects. A mouse study demonstrated that endogenous cannabinoid system signaling is likely to provide intrinsic protection against colonic inflammation.[26] As a result, a hypothesis that phytocannabinoids and endocannabinoids may be useful in the risk reduction and treatment of colorectal cancer has been developed.[27-30]

Industrial hemp is marketed a fiber, as a seed, or as a dual-purpose crop. Although detailed market information for hemp ins not readily available, estimates from Vote Hemp show that the total retail value of hemp products in the U.S. in 2017 was $820 million. This includes food and body products, clothing, auto parts, building materials, and other products.


By the 1930s, marijuana was banned in 24 states. The newly minted Federal Bureau of Narcotics launched a campaign against the drug, and newspapers fueled hysteria with headlines like the 1933 Los Angeles Examiner's "Murder Weed Found Up and Down the Coast — Deadly Marihuana Dope Plant Ready for Harvest That Means Enslavement of California Children." By 1937, Congress passed the Marihuana Tax Act, which effectively banned marijuana except for a few medicinal purposes, according to "Smoke Signals: A Social History of Marijuana – Medical, Recreational and Legal" (Scribner, 2012).

On October 17, 2018, Canada legalized cannabis for recreational adult use[54] making it the second country in the world to do so after Uruguay and the first G7 nation.[55] The Canadian Licensed Producer system may become the Gold Standard in the world for safe and secure cannabis production,[56] including provisions for a robust craft cannabis industry where many expect opportunities for experimenting with different strains.[57] Laws around use vary from province to province including age limits, retail structure, and growing at home.[58]
Preliminary work in Germany (noted in Karus and Leson 1994) suggested that hemp could be grown on soils contaminated with heavy metals, while the fiber remained virtually free of the metals. Kozlowski et al. (1995) observed that hemp grew very well on copper-contaminated soil in Poland (although seeds absorbed high levels of copper). Baraniecki (1997) found similar results. Mölleken et al. (1997) studied effects of high concentration of salts of copper, chromium, and zinc on hemp, and demonstrated that some hemp cultivars have potential application to growth in contaminated soils. It would seem unwise to grow hemp as an oilseed on contaminated soils, but such a habitat might be suitable for a fiber or biomass crop. The possibility of using hemp for bioremediation deserves additional study.
Hemp is considered by a 1998 study in Environmental Economics to be environmentally friendly due to a decrease of land use and other environmental impacts, indicating a possible decrease of ecological footprint in a US context compared to typical benchmarks.[59] A 2010 study, however, that compared the production of paper specifically from hemp and eucalyptus concluded that "industrial hemp presents higher environmental impacts than eucalyptus paper"; however, the article also highlights that "there is scope for improving industrial hemp paper production".[60] Hemp is also claimed to require few pesticides and no herbicides, and it has been called a carbon negative raw material.[61][62] Results indicate that high yield of hemp may require high total nutrient levels (field plus fertilizer nutrients) similar to a high yielding wheat crop.[63]
Individuals who are considering participation in the Industrial Hemp Research Program in Kansas in 2019, whether as a grower, distributor or processor, can now submit a Pre-Application and Pre-Application Research Proposal. This is voluntary, and is not an application for a license, but will provide an opportunity to receive an informal review of your research proposal which can help expedite the process when the full research application is available. 
Hemp is a multi-purpose agricultural crop delivering seeds, fibers and bio-active chemicals for a number of uses and markets. Industrial hemp is defined in federal and Montana statute as Cannabis sativa L. that contains no more than 0.3% delta-9 tetrahydrocannabinol (THC). Industrial hemp is authorized as an alternative agricultural crop by the Montana Legislature, Section 80-18-101 through 80-18-111 of Montana Code Annotated.
Cannabis Ruderalis – Thought to be a cannabis species originating in central Asia, it flowers earlier, is much smaller, and can withstand much harsher climates than either Cannabis indica or Cannabis sativa. This species purportedly buds based on age rather than changes in length of daylight, known as auto-flowering. It’s used primarily for food production, such as hemp seeds and hemp seed oil.
A chief argument that has been advanced in favor of developing hemp as a paper and pulp source has been that as a non-wood or tree-free fiber source, it can reduce harvesting of primary forests and the threat to associated biodiversity. It has been claimed that hemp produces three to four times as much useable fiber per hectare per annum as forests. However, Wong (1998) notes evidence that in the southern US hemp would produce only twice as much pulp as does a pine plantation (but see discussion below on suitability of hemp as a potential lumber substitute in areas lacking trees).

In some areas where cannabis use had been historically tolerated, new restrictions were instituted, such as the closing of cannabis coffee shops near the borders of the Netherlands,[210] and closing of coffee shops near secondary schools in the Netherlands.[211] In Copenhagen, Denmark in 2014, mayor Frank Jensen discussed possibilities for the city to legalize cannabis production and commerce.[212]

Most human studies of CBD have been done on people who have seizures, and the FDA recently approved the first CBD-based drug, Epidiolex, for rare forms of epilepsy. Clinical trials for other conditions are promising, but tiny. In one Brazilian study published in 2011 of people with generalized social anxiety disorder, for example, taking a 600-mg dose of CBD (higher than a typical dose from a tincture) lessened discomfort more than a placebo, but only a dozen people were given the pill.
The importation and movement of hemp seeds and plants is restricted under federal law. According to the Statement of Principles on Industrial Hemp (81 Federal Register (FR) 53395) issued by the U.S. Department of Agriculture, U.S. Drug Enforcement Administration, and U.S. Food and Drug Administration, "industrial hemp plants and seeds may not be transported across State lines." For more information, contact the U.S. Drug Enforcement Administration.
Fiberboard. In North America the use of nonwood fibers in sheet fiberboard (“pressboard” or “composite board”) products is relatively undeveloped. Flax, jute, kenaf, hemp, and wheat straw can be used to make composite board. Wheat straw is the dominant nonwood fiber in such applications. Although it might seem that hemp bast fibers are desirable in composite wood products because of their length and strength, in fact the short fibers of the hurds have been found to produce a superior product (K. Domier, pers. commun.). Experimental production of hemp fiberboard has produced extremely strong material (Fig. 22). The economic viability of such remains to be tested. Molded fiberboard products are commercially viable in Europe (Fig. 23), but their potential in North America remains to be determined.
Another clinical trial that involved 139 patients with HIV or AIDS and weight loss found that, compared with placebo, oral dronabinol was associated with a statistically significant increase in appetite after 4 to 6 weeks of treatment. Patients receiving dronabinol tended to have weight stabilization, whereas patients receiving placebo continued to lose weight.[43]
Hi Diane, how did you go on with the CBD oil please. If it worked how long before you saw any results. I'm scared of flaring everything. Nerve damage across buttocks from a surgeon who found the nerve stuck to the bulge during a laminectomy operation and prised it off. I haven't sat for 5 years and getting worse. A muscle in my buttock is now throbbing constantly and causing pain to the muscle above. I've only started taking it today but the muscle pain is still as painful. Does it take a while for it to work. Only started on low dose to see what happens. Thank you Lyn
One systematic review studied 30 randomized comparisons of delta-9-THC preparations with placebo or other antiemetics from which data on efficacy and harm were available.[31] Oral nabilone, oral dronabinol, and intramuscular levonantradol (a synthetic analog of dronabinol) were tested. Inhaled Cannabis trials were not included. Among all 1,366 patients included in the review, cannabinoids were found to be more effective than the conventional antiemetics prochlorperazine, metoclopramide, chlorpromazine, thiethylperazine, haloperidol, domperidone, and alizapride. Cannabinoids, however, were not more effective for patients receiving very low or very high emetogenic chemotherapy. Side effects included a feeling of being high, euphoria, sedation or drowsiness, dizziness, dysphoria or depression, hallucinations, paranoia, and hypotension.[31]

George Washington’s initial interest in hemp was as a cash crop. After deciding not to cultivate it as a cash crop, Washington grew it to meet the needs of his own plantation. Hemp was used at Mount Vernon for rope, thread for sewing sacks, canvas, and for repairing the seine nets used at the fisheries. Washington’s diaries and farm reports indicate that hemp grew at all five farms which made up Mount Vernon, (Mansion House, River Farm, Dogue Run Farm, Muddy Hole Farm, and Union Farm).
Hi, I had ovarian cancer stage 2 and went to do chemotherapy for 16 times in 2014. It came back last year 2016 but I did not do chemotherapy or radiation therapy as suggested by the doctor. I am taking hormone therapy at the moment. I would like to use cannabis oil but which one and how much CBD and how much THC should I take for ovarian cancer? Can anyone give some idea?. Thank you very much.
In the early 1990s, industrial hemp agriculture in North America began with the Hemp Awareness Committee at the University of Manitoba. The Committee worked with the provincial government to get research and development assistance, and was able to obtain test plot permits from the Canadian government. Their efforts led to the legalization of industrial hemp (hemp with only minute amounts of tetrahydrocannabinol) in Canada and the first harvest in 1998.[77][78]

The above uses are based on hemp as a mechanical strengthener of materials. Hemp can also be chemically combined with materials. For example, hemp with gypsum and binding agents may produce light panels that might compete with drywall. Hemp and lime mixtures make a high quality plaster. Hemp hurds are rich in silica (which occurs naturally in sand and flint), and the hurds mixed with lime undergo mineralization, to produce a stone-like material. The technology is most advanced in France (Fig. 26). The mineralized material can be blown or poured into the cavities of walls and in attics as insulation. The foundations, walls, floors, and ceilings of houses have been made using hemp hurds mixed with natural lime and water. Sometimes plaster of Paris (pure gypsum), cement, or sand is added. The resulting material can be poured like concrete, but has a texture vaguely reminiscent of cork—much lighter than cement, and with better heat and sound-insulating properties. An experimental “ceramic tile” made of hemp has recently been produced (Fig. 27).
Canabidol™ Oral Capsules deliver 100% Cannabis Sativa L. from specifically bred industrial hemp plants containing high potency Cannabidiol. Each CBD capsule contains all the Cannabinoids, terpenoids, essential oils and all the other compounds of the cannabis plant. A packet of 30 capsules contains 15,000mg of Cannabis Sativa L. and 300mg of CBD (Cannabidiol) Each capsule contains 500mg of Cannabis Sativa L. and 10mg of the active ingredient CBD
Cannabis (/ˈkænəbɪs/) is a genus of flowering plants in the family Cannabaceae. The number of species within the genus is disputed. Three species may be recognized: Cannabis sativa, Cannabis indica, and Cannabis ruderalis; C. ruderalis may be included within C. sativa; or all three may be treated as subspecies of a single species, C. sativa.[1][2][3][4] The genus is widely accepted as being indigenous to and originating from Central Asia, with some researchers also including upper South Asia in its origin.[5][6]
Marijuana and hemp both come from the same species of plant, Cannabis sativa. Once it was discovered the plant’s flowers can can have psychoactive effects, cultivators began growing separate strains of the plant – one normal variety, and one whose flowers contained higher levels of the cannabinoid tetrahydrocannabinol (THC), leading to tighter regulation.
Due to almost a century of misinformation about Cannabis, the distinction between Cannabis and its two primary species — hemp and marijuana — has become unclear to the many and some even consider the three plants to be one in the same. Because of this, the three terms are often used interchangeably, which has created difficulties when understanding the usage and benefits of Hemp vs Marijuana and Cannabis in general.

The Gateway Hypothesis states that cannabis use increases the probability of trying "harder" drugs. The hypothesis has been hotly debated as it is regarded by some as the primary rationale for the United States prohibition on cannabis use.[249][250] A Pew Research Center poll found that political opposition to marijuana use was significantly associated with concerns about health effects and whether legalization would increase marijuana use by children.[251]
The most pressing need of the hemp industry in North America is for the breeding of more productive oilseed cultivars. At present, mainly European cultivars are available, of which very few are suitable for specialized oilseed production. More importantly, hempseed oil is not competitive, except in the novelty niche market, with the popular food oils. As argued above, to be competitive, hemp should produce approximately 2 t/ha; at present 1 t/ha is considered average to good production. Doubling the productive capacity of a conventional crop would normally be considered impossible, but it needs to be understood just how little hemp has been developed as an oilseed. There may not even be extant land races of the kind of hemp oilseed strains that were once grown in Russia, so that except for a very few very recent oilseed cultivars, there has been virtually no breeding of oilseed hemp. Contrarily, hemp has been selected for fiber to the point that some breeders consider its productivity in this respect has already been maximized. Fiber strains have been selected for low seed production, so that most hemp germplasm has certainly not been selected for oilseed characteristics. By contrast, drug varieties have been selected for very high yield of flowers, and accordingly produce very high yield of seeds. Drug varieties have been observed to produce more than a kilogram of seed per plant, so that a target yield of several tonnes per hectare is conceivable (Watson and Clarke 1997). Of course, the high THC in drug cultivars makes these a difficult source of germplasm. However, wild plants of C. sativa have naturally undergone selection for high seed productivity, and are a particularly important potential source of breeding germplasm.
The dosages mentioned do not take into account the strength of the tincture. I have Elixinol 300, I took 1/2 dropper (0.5ml, which offers 5mg of CBD) as indicated on the bottle and felt severely nauseous for 3 hours thereafter. There is no way I cold take this dose twice per day, as recommended on the bottle. The high dosages on this site must surely be for much weaker concentrations?
Marijuana regulators in Washington State will entertain sweeping changes to how marijuana is tested, processed, packaged and sold in one of the U.S.’s oldest recreational marijuana markets, officials announced late Wednesday. Recreational cannabis has been sold in regulated retail outlets in Washington since 2014. Consumers there pay one of the country’s highest tax burdens, generating … Continue reading Washington State Prepares To Rewrite Marijuana Testing And Packaging Rules
Dehulled (i.e. hulled) hemp seed is a very recent phenomenon, first produced in quantity in Europe. Hemp seeds have been used as food since ancient times, but generally the whole seed, including the hull, was eaten. Hemp seed was a grain used in ancient China, although there has been only minor direct use of hemp seed as food by humans. In the past, hemp seed has generally been a food of the lower classes, or a famine food. Peanut-butter type preparations have been produced from hemp seed in Europe for centuries, but were rather gritty since technology for removing the hulls was rudimentary. Modern seed dehulling using mechanical separation produces a smooth, white, gritless hemp seed meal that needs no additional treatment before it is consumed. It is important to understand, therefore, that the quality of modern hemp seed for human consumption far exceeds anything produced historically. This seed meal should be distinguished from the protein-rich, oil-poor seed cake remaining after oil has been expressed, that is used for livestock feed. The seed cake is also referred to as “seed meal,” and has proven to be excellent for animals (Mustafa et al. 1999).

Hash oil is a resinous matrix of cannabinoids obtained from the Cannabis plant by solvent extraction,[175] formed into a hardened or viscous mass.[176] Hash oil can be the most potent of the main cannabis products because of its high level of psychoactive compound per its volume, which can vary depending on the plant's mix of essential oils and psychoactive compounds.[177] Butane and supercritical carbon dioxide hash oil have become popular in recent years.[178]
Although always sold at a premium price, hemp clothing has a natural appeal to a sector of the population. Hemp clothes are resistant to abrasion, but are typically abrasive. However, appropriate processing and blending with other natural fibers has significantly improved the “feel” of the product, and in China hemp textiles indistinguishable from fine linens in texture are available. Weaving of hemp fibers into textiles and apparel is primarily done in China, Hungary, Romania, Russia, and the Ukraine. Processing costs are higher for industrial hemp because the fibers vary from the standard specifications for fiber length and diameter established for the equipment used in most textile and apparel factories, necessitating the use of specialty machines. The North American hemp apparel industry today is based on fiber, yarn, and fabrics imported from Eastern Europe and China. The extraction technology and spinning facilities, to say nothing of much lower labor costs, make it very difficult for the potential development of a hemp textile industry in North America. The fact that spinning facilities for natural fibers are so concentrated in China is making it increasingly difficult to competitively produce hemp fabrics elsewhere. This of course lessens the value-added future of growing hemp for a potential textile industry in North America. It is possible, however, that new technologies could change this situation, and especially in the EU development is underway to establish a fledgling domestic hemp textile industry. In addition to textiles used in clothing, coarser woven cloth (canvas) is used for upholstery, bags, sacks, and tarpaulins. There is very little effort in North America to produce such woven products, and non-woven material (Fig. 15) can be more easily produced. Hempline in Ontario, the first firm to grow hemp for commercial purposes in North America since the second word war (starting with experimental cultivation in 1994), is the exception, and is concerned with production of fiber for upholstery and carpeting.

Smoking marijuana is hands down the most widely used method of consuming cannabis. It’s also the simplest: a rolling paper and some dried marijuana flower are all you need. Other, more technological methods of smoking marijuana may be rising in popularity. But for many people, the social experience of passing weed around with some friends is what cannabis is all about.
Hemp paper is useful for specialty applications such as currency and cigarette papers where strength is needed. The bast fiber is of greatest interest to the pulp and paper industry because of its superior strength properties compared to wood. However, the short, bulky fibers found in the inner part of the plant (hurds) can also be used to make cheaper grades of paper, apparently without greatly affecting quality of the printing surface. Hemp is not competitive for newsprint, books, writing papers, and general paper (grocery bags, coffee cups, napkins), although there is a specialty or novelty market for those specifically wishing to support the hemp industry by purchasing hemp writing or printing paper despite the premium price (Fig. 17).
Until recent times, the cultivation of hemp primarily as an oilseed was largely unknown, except in Russia. Today, it is difficult to reconstruct the type of plant that was grown there as an oilseed, because such cultivation has essentially been abandoned. Oilseed hemp cultivars in the modern sense were not available until very recently, but some land races certainly were grown specifically for seeds in Russia. Dewey (1914) gave the following information: “The short oil-seed hemp with slender stems, about 30 inches high, bearing compact clusters of seeds and maturing in 60 to 90 days, is of little value for fiber production, but the experimental plants, grown from seed imported from Russia, indicate that it may be valuable as an oil-seed crop to be harvested and threshed in the same manner as oil-seed flax.” Most hemp oilseed in Europe is currently obtained from so-called “dual usage” plants (employed for harvest of both stem fiber and seeds, from the same plants). Of the European dual-usage cultivars, ‘Uniko B’ and ‘Fasamo’ are particularly suited to being grown as oilseeds. Very recently, cultivars have been bred specifically for oilseed production. These include ‘Finola,’ formerly known as ‘Fin-314’ (Fig. 6) and ‘Anka’ (Fig. 7), which are relatively short, little-branched, mature early in north-temperate regions, and are ideal for high-density planting and harvest with conventional equipment. Dewey (1914) noted that a Turkish narcotic type of land race called “Smyrna” was commonly used in the early 20th century in the US to produce birdseed, because (like most narcotic types of Cannabis) it is densely branched, producing many flowers, hence seeds. While oilseed land races in northern Russia would have been short, early-maturing plants in view of the short growing season, in more southern areas oilseed landraces likely had moderate height, and were spaced more widely to allow abundant branching and seed production to develop. Until Canada replaced China in 1998 as a source of imported seeds for the US, most seeds used for various purposes in the US were sterilized and imported from China. Indeed, China remains the largest producer of hempseed. We have grown Chinese hemp land races, and these were short, branched, adapted to a very long growing season (i.e. they come into flower very slowly in response to photoperiodic induction of short days in the fall), and altogether they were rather reminiscent of Dewey’s description of Smyrna. Although similar in appearance to narcotic strains of C. sativa, the Chinese land races we grew were in fact low in intoxicating constituents, and it may well be that what Dewey thought was a narcotic strain was not. Although some forms of C. sativa have quite large seeds, until recently oilseed forms appear to have been mainly selected for a heavy yield of seeds, usually recognizable by abundant branching. Such forms are typically grown at lower densities than hemp grown only for fiber, as this promotes branching, although it should be understood that the genetic propensity for branching has been selected. Percentage or quality of oil in the seeds does not appear to have been important in the past, although selection for these traits is now being conducted. Most significantly, modern selection is occurring with regard to mechanized harvesting, particularly the ability to grow in high density as single-headed stalks with very short branches bearing considerable seed.
Hemp is a bast fiber crop, i.e. the most desirable (“long”) fibers are found in the phloem-associated tissues external to the phloem, just under the “bark.” The traditional and still major first step in fiber extraction is to ret (“rot”) away the softer parts of the plant, by exposing the cut stems to microbial decay in the field (“dew retting,” shown in Figs. 46 and 47) or submerged in water (“water retting, ” shown in Fig. 13). The result is to slough off the outer parts of the stem and to loosen the inner woody core (the “hurds”) from the phloem fibers (Fig. 14). Water retting has been largely abandoned in countries where labor is expensive or environmental regulations exist. Water retting, typically by soaking the stalks in ditches, can lead to a high level of pollution. Most hemp fiber used in textiles today is water retted in China and Hungary. Retting in tanks rather than in open bodies of water is a way of controlling the effluents while taking advantage of the high-quality fiber that is produced. Unlike flax, hemp long fiber requires water retting for preparation of high-quality spinnable fibers for production of fine textiles. Improved microorganisms or enzymes could augment or replace traditional water retting. Steam explosion is another potential technology that has been experimentally applied to hemp (Garcia-Jaldon et al. 1998). Decorticated material (i.e. separated at least into crude fiber) is the raw material, and this is subjected to steam under pressure and increased temperature which “explodes” (separates) the fibers so that one has a more refined (thinner) hemp fiber that currently is only available from water retting. Even when one has suitably separated long fiber, specialized harvesting, processing, spinning and weaving equipment are required for preparing fine hemp textiles. The refinement of equipment and new technologies are viewed as offering the possibility of making fine textile production practical in western Europe and North America, but at present China controls this market, and probably will remain dominant for the foreseeable future.
Spring Hope, NC, Nov. 13, 2018 (GLOBE NEWSWIRE) -- via NEWMEDIAWIRE -- Hemp, Inc. (OTC PINK: HEMP), a global leader in the industrial hemp industry with bi-coastal processing centers including the largest multipurpose industrial hemp processing facility in the western hemisphere (in Spring Hope, North Carolina), announced today that the company is one of the largest sponsors for the 4th Annual Jack Herer Cup on November 15, 2018. At the event, Hemp, Inc. CEO Bruce Perlowin will receive an award for being a trailblazer in the hemp industry. To learn more about the 4th Annual Jack Herer Cup or to RSVP, click here.

As the range of Tweed and CraftGrow brands and products will change in the Shop over time, we recommend the Spectrum Cannabis brand when consistent access to the same product is important to you and your condition. If you have been taking a Tweed product that is no longer carried or available in our store, we have created a comprehensive table for you to explore alternative options. The goal of this table is to support treatment decisions with products most similar to what you have been taking, when a change is necessary.  Learn More
Side effects of CBD include sleepiness, decreased appetite, diarrhea, fatigue, malaise, weakness, sleeping problems, and others.[3] It does not have intoxicating effects like those caused by THC, and may have an opposing effect on disordered thinking and anxiety produced by THC.[7][10][11] CBD has been found to interact with a variety of different biological targets, including cannabinoid receptors and other neurotransmitter receptors.[7][12] The mechanism of action of CBD in terms of its psychoactive and therapeutic effects is not fully clear.[7]
The leaves have a peculiar and diagnostic venation pattern that enables persons poorly familiar with the plant to distinguish a cannabis leaf from unrelated species that have confusingly similar leaves (see illustration). As is common in serrated leaves, each serration has a central vein extending to its tip. However, the serration vein originates from lower down the central vein of the leaflet, typically opposite to the position of, not the first notch down, but the next notch. This means that on its way from the midrib of the leaflet to the point of the serration, the vein serving the tip of the serration passes close by the intervening notch. Sometimes the vein will actually pass tangent to the notch, but often it will pass by at a small distance, and when that happens a spur vein (occasionally a pair of such spur veins) branches off and joins the leaf margin at the deepest point of the notch. This venation pattern varies slightly among varieties, but in general it enables one to tell Cannabis leaves from superficially similar leaves without difficulty and without special equipment. Tiny samples of Cannabis plants also can be identified with precision by microscopic examination of leaf cells and similar features, but that requires special expertise and equipment.[11]
Thanks for your interest in our products. Unfortunately due to strict FDA regulations I am unable to make claims on our products based on your specific needs, I can though share our top selling products in each category. Please view the links below:http://cbdoilreview.org/product/elixinol-cbd-oil-extract-x-pen-1000mg/http://cbdoilreview.org/product/endoca-hemp-oil-drops-1500mg/http://cbdoilreview.org/product/elixinol-hemp-oil-drops-regular-300mg/http://cbdoilreview.org/product/elixinol-cbd-hemp-oil-capsules-900mg/https://cbdoilreview.org/product/vape-bright-thrive-cbd-vape-cartridge-200mg/As far as dosage goes, I would recommend reading through our page on dosing. I have attached that link below. https://cbdoilreview.org/cbd-cannabidiol/cbd-dosage/Hopefully these help.

Specific city and county laws have been enacted to regulate how citizens and tourists may possess and consume marijuana. Penalties exist for driving while under the influence of marijuana. Someone driving under the influence of marijuana is considered impaired in both Colorado and Washington when five nanograms per milliliter (ng/mL) of blood or more of active THC is detected.
A mixture of fiberglass, hemp fiber, kenaf, and flax has been used since 2002 to make composite panels for automobiles.[34] The choice of which bast fiber to use is primarily based on cost and availability. Various car makers are beginning to use hemp in their cars, including Audi, BMW, Ford, GM, Chrysler, Honda, Iveco, Lotus, Mercedes, Mitsubishi, Porsche, Saturn, Volkswagen[35] and Volvo. For example, the Lotus Eco Elise[36] and the Mercedes C-Class both contain hemp (up to 20 kg in each car in the case of the latter).[37]
×