“The plan? Whip the public into a frenzy over ill effects of marijuana, the psychoactive leaves and flowers of the hemp plant; the reputation of the fibers and seeds used by industry would be posing little threat to society emerged as the ‘assassin of youth.’ The strategy worked. In 1937, with virtually no warning, Congress announced a prohibitive tax on hemp, effectively ending the production and sale of the plant in the United States.
In addition to providing useful fibers, hemp seed also has high nutritional value. and the plant can be used to make biodegradable plastics, some fuels, and a variety of other things. Hemp foods including but not limited to hemp energy bars, hemp salad dressing,hemp milk, hemp protein shakes, hemp oil gel caps and hemp protein powder are among some of the health products being produced today. Visit the Hemp Education pages to learn more!
The above uses are based on hemp as a mechanical strengthener of materials. Hemp can also be chemically combined with materials. For example, hemp with gypsum and binding agents may produce light panels that might compete with drywall. Hemp and lime mixtures make a high quality plaster. Hemp hurds are rich in silica (which occurs naturally in sand and flint), and the hurds mixed with lime undergo mineralization, to produce a stone-like material. The technology is most advanced in France (Fig. 26). The mineralized material can be blown or poured into the cavities of walls and in attics as insulation. The foundations, walls, floors, and ceilings of houses have been made using hemp hurds mixed with natural lime and water. Sometimes plaster of Paris (pure gypsum), cement, or sand is added. The resulting material can be poured like concrete, but has a texture vaguely reminiscent of cork—much lighter than cement, and with better heat and sound-insulating properties. An experimental “ceramic tile” made of hemp has recently been produced (Fig. 27).
Jump up ^ Fernández-Ruiz J, Sagredo O, Pazos MR, García C, Pertwee R, Mechoulam R, Martínez-Orgado J (February 2013). "Cannabidiol for neurodegenerative disorders: important new clinical applications for this phytocannabinoid?". British Journal of Clinical Pharmacology. 75 (2): 323–33. doi:10.1111/j.1365-2125.2012.04341.x. PMC 3579248. PMID 22625422.
There is a general inverse relationship in the resin of Cannabis between the amounts of THC present and the amount of the other principal cannabinoid, CBD. Whereas most drug strains contain primarily THC and little or no CBD, fiber and oilseed strains primarily contain CBD and very little THC. CBD can be converted to THC by acid catalyzed cyclization, and so could serve as a starting material for manufacturing THC. In theory, therefore, low-THC cultivars do not completely solve the problem of drug abuse potential. In practice, however, the illicit drug trade has access to easier methods of synthesizing THC or its analogues than by first extracting CBD from non-drug hemp strains.
The health consequences of cannabis use in developing countries are largely unknown beacuse of limited and non-systematic research, but there is no reason a priori to expect that biological effects on individuals in these populations would be substantially different to what has been observed in developed countries. However, other consequences might be different given the cultural and social differences between countries.
"Skunk" refers to several named strains of potent cannabis, grown through selective breeding and sometimes hydroponics. It is a cross-breed of Cannabis sativa and C. indica (although other strains of this mix exist in abundance). Skunk cannabis potency ranges usually from 6% to 15% and rarely as high as 20%. The average THC level in coffee shops in the Netherlands is about 18–19%.[242]
I have crohns dibeates 2 stage kidney failure I take 6000 mg of chemicals a day when I get a flair l might lose a lot of blood I've had fistula surgery once darn mean killed me 2 more just gut surgerys little bit of gut removed I tease my gut doctor he schoold just put in a zipper any way I'm looking for something natural to try for pain also where I live if you get caught automatic life so the delima begins how much would any one suggest starting out with thanks for your time also compared to most of the folks mine seems like a minor problem on this site but I would appreciate some advice I hope all you folks have good lives and remember god always loves you even though sometimes you think he may have forgotten you
The reason so many people are interested in cannabis products that don’t make them high, proponents say, is that CBD helps with everything from pain and nausea to rheumatoid arthritis, cancer, Crohn’s disease, and dementia. CBD is anti-inflammatory, anti-anxiety, antibacterial, immunosuppressive, and more, says Joseph Cohen, D.O., a cannabis doctor in Boulder, CO.

Highly selected forms of the fiber cultigen possess features maximizing fiber production. Since the nodes tend to disrupt the length of the fiber bundles, thereby limiting quality, tall, relatively unbranched plants with long internodes have been selected. Another strategy has been to select stems that are hollow at the internodes, with limited wood, since this maximizes production of fiber in relation to supporting woody tissues. Similarly, limited seed productivity concentrates the plant’s energy into production of fiber, and fiber cultivars often have low genetic propensity for seed output. Selecting monoecious strains overcomes the problem of differential maturation times and quality of male (staminate) and female (pistillate) plants (males mature 1–3 weeks earlier). Male plants in general are taller, albeit slimmer, less robust, and less productive. Except for the troublesome characteristic of dying after anthesis, male traits are favored for fiber production, in contrast to the situation for drug strains noted below. In former, labor-intensive times, the male plants were harvested earlier than the females, to produce superior fiber. The limited branching of fiber cultivars is often compensated for by possession of large leaves with wide leaflets, which obviously increase the photosynthetic ability of the plants. Since fiber plants have not generally been selected for narcotic purposes, the level of intoxicating constituents is usually limited.


Marijuana and hemp both come from the same species of plant, Cannabis sativa. Once it was discovered the plant’s flowers can can have psychoactive effects, cultivators began growing separate strains of the plant – one normal variety, and one whose flowers contained higher levels of the cannabinoid tetrahydrocannabinol (THC), leading to tighter regulation.

The gateway effect may appear due to social factors involved in using any illegal drug. Because of the illegal status of cannabis, its consumers are likely to find themselves in situations allowing them to acquaint with individuals using or selling other illegal drugs.[256][257] Utilizing this argument some studies have shown that alcohol and tobacco may additionally be regarded as gateway drugs;[258] however, a more parsimonious explanation could be that cannabis is simply more readily available (and at an earlier age) than illegal hard drugs. In turn alcohol and tobacco are easier to obtain at an earlier point than is cannabis (though the reverse may be true in some areas), thus leading to the "gateway sequence" in those individuals since they are most likely to experiment with any drug offered.[249]


Henry Ford recognized the utility of hemp in early times. In advance of today’s automobile manufacturers, he constructed a car with certain components made of resin stiffened with hemp fiber (Fig. 19). Rather ironically in view of today’s parallel situation, Henry Ford’s hemp innovations in the 1920s occurred at a time of crisis for American farms, later to intensify with the depression. The need to produce new industrial markets for farm products led to a broad movement for scientific research in agriculture that came to be labeled “Farm Chemurgy,” that today is embodied in chemical applications of crop constituents.
Sec. 7606. Legitimacy of Industrial Hemp Research contained in the 2014 Federal Farm Bill, which was signed into law Feb. 7, provides for the cultivation of industrial hemp for purposes of research by institutions of higher education or state departments of agriculture in states where it is legal. The interaction of the U.S. Drug Enforcement Agency (DEA) and the provisions of Sec. 7606 is a developing process. As TDA develops Tennessee's industrial hemp program every effort will be made to minimize the impact of federal law on potential hemp producers in Tennessee.   In May of 2016 the law was amended to allow for a processor license.
Hemp does best on a loose, well-aerated loam soil with high fertility and abundant organic matter. Well-drained clay soils can be used, but poorly-drained clay soils are very inappropriate because of their susceptibility to compaction, which is not tolerated. Young plants are sensitive to wet or flooded soils, so that hemp must have porous, friable, well-drained soils. Sandy soils will grow good hemp, provided that adequate irrigation and fertilization are provided, but doing so generally makes production uneconomical. Seedbed preparation requires considerable effort. Fall plowing is recommended, followed by careful preparation of a seedbed in the spring. The seedbed should be fine, level, and firm. Seed is best planted at 2–3 cm (twice as deep will be tolerated). Although the seedlings will germinate and survive at temperatures just above freezing, soil temperatures of 8°–10°C are preferable. Generally hemp should be planted after danger of hard freezes, and slightly before the planting date of maize. Good soil moisture is necessary for seed germination, and plenty of rainfall is needed for good growth, especially during the first 6 weeks. Seeding rate is specific to each variety, and this information should be sought from the supplier. Fiber strains are typically sown at a minimum rate of 250 seeds per m2 (approximately 45 kg/ha), and up to three times this density is sometimes recommended. In western Europe, seeding rates range from 60–70 kg/ha for fiber cultivars. Recommendations for seeding rates for grain production vary widely, from 10–45 kg/ha. Densities for seed production for tall, European, dual-purpose cultivars are less than for short oilseed cultivars. Low plant densities, as commonly found in growing tall European cultivars for seed, may not suppress weed growth adequately, and under these circumstances resort to herbicides may pose a problem for those wishing to grow hempseed organically. Hemp requires about the same fertility as a high-yielding crop of wheat. Industrial hemp grows well in areas that corn produces high yields. Growing hemp may require addition of up to 110 kg/ha of nitrogen, and 40–90 kg/ha of potash. Hemp particularly requires good nitrogen fertilization, more so for seed production than fiber. Adding nitrogen when it is not necessary is deleterious to fiber production, so that knowledge of the fertility of soils being used is very important. Organic matter is preferably over 3.5%, phosphorus should be medium to high (>40 ppm), potassium should be medium to high (>250 ppm), sulfur good (>5,000 ppm), and calcium not in excess (<6,000 ppm).
Home Curriculum Commodities & Products FoodSearcher Tool Agritourism Agritourism Profile Clay-Target Shooting Facilities Equine Agritourism Fee and Lease Pond Fishing Game Birds Hunting Leases Nature-Based Tourism Rural Weddings Wine Tours Agroforestry Agroforestry Profile Non-traditional Forest Products Christmas Trees Nursery Trees Aquaculture Aquaculture Profile Aquaponics Aquaculture Non-Fish Species Aquaculture Fin Fish Species Biomass Biomass Profile Manure Digester Biogas General Biomass Hay Miscanthus profile Sawdust Switchgrass Fiber Fiber Profile Cotton Industrial Hemp Kenaf Forestry Agroforestry Forestry Profile Christmas Trees Nursery Trees Fruits Wine Apples Apricots Aronia Berries Avocados Blackberries Blueberries Cherimoya Cherries Cranberries Dates Dragon Fruit Figs Gooseberry Grapes Guava Kiwi Lychee Mangos Mulberries Nectarines Olives Pawpaw Peaches Pears Persimmon Plums Pomegranates Quince Raisins Raspberries Strawberries Kiwi Grains & Oilseeds Camelina Chufa Niche Corn Opportunities Meadowfoam Mustard Organic Soy Pennycress Proso Millet Quinoa Rapeseed Safflower Egyptian Wheat (Sorghum) Spelt Sorghum Sunflower Profile Triticale Livestock Beef Bees Dairy Deer (Venison) Ranching Goats Lamb Ostrich & Emu Pork Poultry Rabbits Worms Nuts Almonds Black Walnuts Chestnuts English Walnuts Hazelnuts Pecans Pine Nuts Pistachios Peanuts Macadamia Nuts Specialty Crops Amaranth Buckwheat Herbs Floriculture Maple Syrup Profile Mushrooms Profile Russian Dandelion Tobacco Vegetables Artichokes Asparagus Azuki Beans Bell and Chili Peppers Broccoli Cabbage Carrots Cauliflower Celery Chickpeas Eggplant Garlic Garlic Profile Lettuce Melons Onions Potato Profile Pumpkins Spinach Squash Sweet Corn Sweet Potatoes Tomatoes Watermelon Markets & Industries Energy Fiber Food BizMiner Reports for Food Sectors Business Development Getting Prepared Value-added Agriculture Business Skills Business and Economic Concepts and Principles Starting a Business Market/Business Assessment Creating a Business Raising Money Special Types of Businesses Operating a Business Marketing Direct Marketing Promotion Legal Budgeting Finance Regulatory Management Business Strategy and Analysis Expansion and Strategy Analysis Business Workbench Business Worksheets and Calculators Analysis Worksheets and Calculators Business Calculators Renewable Energy Renewable Energy Report Prices and Profitability Models Energy Energy - Overview Energy - Outlook Energy - Industry Analysis Energy - Related Websites and News Sources Renewable Energy Renewable Energy - Industry Analysis Renewable Energy - Community Impacts Renewable Energy - Related Websites and News Sources Solar Energy Profile Wind Energy Profile Biofuels/ Biorefining Biofuels/Biorefining - Industry Analysis Biofuels/Biorefining - Finance/Legal Biofuels/Biorefining - Community Impacts Biofuels/Biorefining - Policy Biofuels/Biorefining - Impact on Agricultural Sector Biofuels/Biorefining - Related Websites and News Sources Ethanol Ethanol - Industry Analysis Ethanol - Prices, Trends and Markets Ethanol - Profitability Ethanol - Co-Products Ethanol - Impact on Agricultural Sector Ethanol - Related Websites and News Sources Ethanol - Finance and Legal Ethanol Profile Biodiesel Biodiesel - Industry Analysis Biodiesel - Prices, Trends and Markets Biodiesel - Related Websites and News Sources Biodiesel - Profitability Biodiesel Profile Biomass (energy production) Biomass - Industry Analysis Biomass - Technology Biomass - Related Websites and News Sources Biomass - Legal and Finance Feedstocks (biofuels) General Information Annual Crops Perennial Grasses Trees and Wood Feedstocks - Related Websites and News Sources Energy Efficiency Energy Efficiency - Related Websites and News Sources Farm Energy Efficiency Home Energy Efficiency Energy Calculators Farm Alternative Energy Climate Change Climate Change and Agriculture Directories & State Resources AgMRC Value-added Directories State Resources USDA Related Directories Related Directories News & Media Radio Spots AgMRC Videos Press Releases Conference About Us Contact Us FoodMarketMarker.com

Neurologists are skilled at predicting side effects and interactions between well-researched pharmaceuticals. But due to the dearth of reliable research about CBD, doctors like Hernandez and Knupp cannot guide their patients in its use. If there are adverse reactions, Penny will find out because Harper will suffer through them. She has had to figure out through trial and error how best to mix and measure Harper’s oils. The bottom line, Penny said, is simple: “We are the research.”


Hi Marilyn, I would recommend a topical lotion or salve to start for instant relief.. Maybe 250 to 300 mg tincture to see how you feel. For me, the salve took the pain in my hands away in under a minute. I didn't notice how much the tincture worked until I forgot to take on vacation. Pain that was pretty much gone but came back, I was tired, grumpy and felt horrible. It works, just need to find right product and dosage for you.


Cannabinoids are a group of 21-carbon–containing terpenophenolic compounds produced uniquely by Cannabis species (e.g., Cannabis sativa L.).[1,2] These plant-derived compounds may be referred to as phytocannabinoids. Although delta-9-tetrahydrocannabinol (THC) is the primary psychoactive ingredient, other known compounds with biologic activity are cannabinol, cannabidiol (CBD), cannabichromene, cannabigerol, tetrahydrocannabivarin, and delta-8-THC. CBD, in particular, is thought to have significant analgesic, anti-inflammatory, and anxiolytic activity without the psychoactive effect (high) of delta-9-THC.
Many monoecious varieties have also been described,[19] in which individual plants bear both male and female flowers.[20] (Although monoecious plants are often referred to as "hermaphrodites", true hermaphrodites – which are less common in Cannabis – bear staminate and pistillate structures together on individual flowers, whereas monoecious plants bear male and female flowers at different locations on the same plant.) Subdioecy (the occurrence of monoecious individuals and dioecious individuals within the same population) is widespread.[21][22][23] Many populations have been described as sexually labile.[24][25][26]
The vegetable oils have been classified by “iodine value” as drying (120–200), semi-drying (100–120), and non-drying (80–100), which is determined by the degree of saturation of the fatty acids present (Raie et al. 1995). Good coating materials prepared from vegetable oil depend on the nature and number of double bonds present in the fatty acids. Linseed oil, a drying oil, has a very high percentage of linolenic acid. Hempseed oil has been classified as a semi-drying oil, like soybean oil, and is therefore more suited to edible than industrial oil purposes. Nevertheless hemp oil has found applications in the past in paints, varnishes, sealants, lubricants for machinery, and printing inks. However, such industrial end uses are not presently feasible as the oil is considered too expensive (de Guzman 2001). Larger production volumes and lower prices may be possible, in which case hemp oil may find industrial uses similar to those of linseed (flax), soybean, and sunflower oils, which are presently used in paints, inks, solvents, binders, and in polymer plastics. Hemp shows a remarkable range of variation in oil constituents, and selection for oilseed cultivars with high content of valued industrial constituents is in progress.
What makes CBD so appealing is that it’s non-intoxicating, so it won’t get you high, though it “is technically psychoactive, because it can influence things like anxiety,” Jikomes said. Although much of the marketing blitz around CBD centers on the fact that you can take it without getting stoned, there isn’t much research looking at the effects of CBD when used in isolation, with a couple of exceptions. One is the use of CBD to treat seizures: CBD is the active ingredient in the only cannabis product that the Food and Drug Administration has signed off on — a drug called Epidiolex, which is approved for treating two rare forms of epilepsy. Animal models and a few human studies suggest that CBD can help with anxiety, but those are the only conditions with much research on CBD in isolation.
^ Jump up to: a b c d Campos AC, Moreira FA, Gomes FV, Del Bel EA, Guimarães FS (December 2012). "Multiple mechanisms involved in the large-spectrum therapeutic potential of cannabidiol in psychiatric disorders". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences (Review). 367 (1607): 3364–78. doi:10.1098/rstb.2011.0389. PMC 3481531. PMID 23108553.
© Copyright 2018. Miji Media LLC. All Rights Reserved. These statements have not been evaluated by the Food and Drug Administration. The products mentioned on this site are not intended to diagnose, treat, cure or prevent any disease. As the consumer, it is your responsibility to know your local, state and federal laws before making any purchases. All products on this website are intended for legal use. Prior to purchasing a product(s) on this website, you should confirm legality of the product in the state where you request shipment.
Cannabis Ruderalis – Thought to be a cannabis species originating in central Asia, it flowers earlier, is much smaller, and can withstand much harsher climates than either Cannabis indica or Cannabis sativa. This species purportedly buds based on age rather than changes in length of daylight, known as auto-flowering. It’s used primarily for food production, such as hemp seeds and hemp seed oil.
I have/had ovarian/primary peritoneal cancer. I used thc/cbd oil pills I self made from the start. I am supposedly their “poster child”. I went thru with chemo and surgery. Oh that horror! But when I tried to tell two seperate doctors, the surgeon was all about it, and my oncologist threw a fit and said it was an anecdote. There are more than 100 studies at the NIH govt website.
"Industrial hemp" means a fiber or oilseed crop, or both, that is limited to types of the plant Cannabis sativa L. having no more than three-tenths of 1 percent tetrahydrocannabinol (THC) contained in the dried flowering tops, whether growing or not; the seeds of the plant; the resin extracted from any part of the plant; and every compound, manufacture, salt, derivative, mixture, or preparation of the plant, its seeds or resin produced therefrom.

Cannabis is an annual, dioecious, flowering herb. The leaves are palmately compound or digitate, with serrate leaflets.[10] The first pair of leaves usually have a single leaflet, the number gradually increasing up to a maximum of about thirteen leaflets per leaf (usually seven or nine), depending on variety and growing conditions. At the top of a flowering plant, this number again diminishes to a single leaflet per leaf. The lower leaf pairs usually occur in an opposite leaf arrangement and the upper leaf pairs in an alternate arrangement on the main stem of a mature plant.

Cannabis, also referred to as marijuana, has been an integral part of human civilizations for millennia. Both as a medicine and as a recreational substance, cannabis is the most popular illicit drug in the world. Today, the legal landscape that has prohibited marijuana for much of the twentieth century is giving way to decriminalization and full legalization. Legal, commercial cannabis businesses are already making an enormous economic impact.
In May of 2018, Mount Vernon planted an industrial cultivar of hemp on the four-acre Pioneer Farm site. Under the 2015 Industrial Hemp Law enacted by the Virginia General Assembly and working with the industrial hemp research program of the University of Virginia, Mount Vernon planted hemp to expand its interpretation of George Washington’s role as an enterprising farmer. As the first historic home of the founding fathers to plant hemp, Mount Vernon will use the plant as an interpretative tool to help better tell the story of Washington’s role as a farmer.

Nabiximols (Sativex), a Cannabis extract with a 1:1 ratio of THC:CBD, is approved in Canada (under the Notice of Compliance with Conditions) for symptomatic relief of pain in advanced cancer and multiple sclerosis.[17] Canada, New Zealand, and some countries in Europe also approve nabiximols for spasticity of multiple sclerosis, a common symptom that may include muscle stiffness, reduced mobility, and pain, and for which existing therapy is unsatisfactory.
The confusion between industrial hemp and marijuana is based on the visual similarities of widely differentiated varieties of plants. By definition, industrial hemp is high in fiber and low in active tetrahydrocannabinol (THC), the psychoactive ingredient in marijuana that makes some cannabis varieties a valued drug. Canada and the European Union maintain this distinction by strictly regulating the THC levels of industrial hemp, requiring it to be less than 0.3 percent, compared to THC levels of between 3 to 30 percent in marijuana.
The basic commercial options for growing hemp in North America is as a fiber plant, an oilseed crop, or for dual harvest for both seeds and fiber. Judged on experience in Canada to date, the industry is inclined to specialize on either fiber or grain, but not both. Hemp in our opinion is particularly suited to be developed as an oilseed crop in North America. The first and foremost breeding goal is to decrease the price of hempseed by creating more productive cultivars. While the breeding of hemp fiber cultivars has proceeded to the point that only slight improvements can be expected in productivity in the future, the genetic potential of hemp as an oilseed has scarcely been addressed. From the point of view of world markets, concentrating on oilseed hemp makes sense, because Europe has shown only limited interest to date in developing oilseed hemp, whereas a tradition of concentrating on profitable oilseed products is already well established in the US and Canada. Further, China’s supremacy in the production of high-quality hemp textiles at low prices will be very difficult to match, while domestic production of oilseeds can be carried out using technology that is already available. The present productivity of oilseed hemp—about 1 t/ha under good conditions, and occasional reports of 1.5 to 2 t/ha, is not yet sufficient for the crop to become competitive with North America’s major oilseeds. We suggest that an average productivity of 2 t/ha will be necessary to transform hempseed into a major oilseed, and that this breeding goal is achievable. At present, losses of 30% of the seed yields are not uncommon, so that improvements in harvesting technology should also contribute to higher yields. Hemp food products cannot escape their niche market status until the price of hempseed rivals that of other oilseeds, particularly rapeseed, flax, and sunflower. Most hemp breeding that has been conducted to date has been for fiber characteristics, so that there should be considerable improvement possible. The second breeding goal is for larger seeds, as these are more easily shelled. Third is breeding for specific seed components. Notable are the health-promoting gamma-linolenic acid; improving the amino acid spectrum of the protein; and increasing the antioxidant level, which would not only have health benefits but could increase the shelf life of hemp oil and foods.
There are also other difficulties in researching the effects of cannabis. Many people who smoke cannabis also smoke tobacco.[265] This causes confounding factors, where questions arise as to whether the tobacco, the cannabis, or both that have caused a cancer. Another difficulty researchers have is in recruiting people who smoke cannabis into studies. Because cannabis is an illegal drug in many countries, people may be reluctant to take part in research, and if they do agree to take part, they may not say how much cannabis they actually smoke.[266]
One of the most curious uses of hemp is as a fence to prevent pollen transfer in commercial production of seeds. Isolation distances for ensuring that seeds produced are pure are considerable for many plants, and often impractical. At one point in the 1980s, the only permitted use of hemp in Germany was as a fence or hedge to prevent plots of beets being used for seed production from being contaminated by pollen from ruderal beets. The high and rather inpenetrable hedge that hemp can produce was considered unsurpassed by any other species for the purpose. As well, the sticky leaves of hemp were thought to trap pollen. However, Saeglitz et al. (2000) demonstrated that the spread of beet pollen is not effectively prevented by hemp hedges. Fiber (i.e. tall) cultivars of hemp were also once used in Europe as wind-breaks, protecting vulnerable crops against wind damage. Although hemp plants can lodge, on the whole very tall hemp is remarkably resistant against wind.

An analysis of 84,170 participants in the California Men’s Health Study was performed to investigate the association between Cannabis use and the incidence of bladder cancer. During 16 years of follow-up, 89 Cannabis users (0.3%) developed bladder cancer compared with 190 (0.4%) of the men who did not report Cannabis use (P < .001). After adjusting for age, race, ethnicity, and body mass index, Cannabis use was associated with a 45% reduction in bladder cancer incidence (hazard ratio, 0.55; 95% confidence interval, 0.33–1.00).[16]
Because cannabinoid receptors, unlike opioid receptors, are not located in the brainstem areas controlling respiration, lethal overdoses from Cannabis and cannabinoids do not occur.[1-4] However, cannabinoid receptors are present in other tissues throughout the body, not just in the central nervous system, and adverse effects include tachycardia, hypotension, conjunctival injection, bronchodilation, muscle relaxation, and decreased gastrointestinal motility.
Fig. 3. Photograph of Cannabis sativa. Left, staminate (“male”) plant in flower; right, pistillate (“female”) plant in flower. Fig. 4. United States National Institute of Health, University of Mississippi marijuana plantation site, showing variation in plant size. A tall fiber-type of hemp plant is shown at left, and a short narcotic variety (identified as “Panama Gold”) at right.
Yet when one looks at the industry more broadly, there is cause for concern. In February, as part of an investigation into the marketing claims of six hemp oil companies, the FDA analyzed 18 CBD products. What it found was disturbing: Many of these supposed CBD products were entirely lacking in CBD. Of the products tested, six contained no cannabinoids whatsoever. Another 11 contained less than 1 percent CBD. The product that tested highest in CBD, at 2.6 percent, was a capsule for dogs. In states that have legalized CBD, regulations can require CBD products to contain at least 5 percent CBD, more often 10 or 15 percent.
A USDA analysis of hemp, “Industrial hemp in the United States: Status and market potential,” was issued in 2000, and is available at www.ers.usda.gov/publications/ages001e/index.htm. This is anonymously-authored, therefore presumably represents a corporate or “official” evaluation. The conclusion was that “US markets for hemp fiber (specialty textiles, paper, and composites) and seed (in food or crushed for oil) are, and will likely remain, small, thin markets. Uncertainty about longrun demand for hemp products and the potential for oversupply discounts the prospects for hemp as an economically viable alternative crop for American farmers.” Noting the oversupply of hempseeds associated with Canada’s 12,000 ha in 1999, the report concluded that the long term demand for hemp products is uncertain, and predicts that the hemp market in the US will likely remain small and limited. With respect to textiles, the report noted the lack of a thriving textile flax (linen) US industry (despite lack of legal barriers), so that it would seem unlikely that hemp could achieve a better market status. With respect to hemp oil, the report noted that hemp oil in food markets is limited by its short shelf life, the fact that it can not be used for frying, and the lack of US Food and Drug Administration approval as GRAS (“generally recognized as safe”). Moreover, summarizing four state analyses of hemp production (McNulty 1995, Ehrensing 1998, Kraenzel et al. 1998, Thompson et al. 1998), profitability seemed doubtful.
Health Tools Baby Due Date CalculatorBasal Metabolic Rate CalculatorBody Mass Index (BMI) CalculatorCalories Burned CalculatorChild Energy Requirements CalculatorDaily Calcium Requirements CalculatorDaily Fibre Requirements CalculatorIdeal Weight CalculatorInfectious Diseases Exclusion Periods ToolOvulation CalculatorSmoking Cost CalculatorTarget Heart Rate CalculatorWaist-to-hip Ratio Calculator Risk Tests Depression Self-AssessmentErectile Dysfunction ToolMacular Degeneration ToolOsteoporosis Risk TestProstate Symptoms Self-Assessment
In December 2013, Uruguay became the first country to legalize growing, sale and use of cannabis.[219] After a long delay in implementing the retail component of the law, in 2017 sixteen pharmacies were authorized to sell cannabis commercially.[220] On June 19, 2018, the Canadian Senate passed a bill and the Prime Minister announced the effective legalization date as October 17, 2018.[37][221] Canada is the second nation to legalize the drug.[222]
Breeding for low THC cultivars in Europe has been reviewed by Bócsa (1998), Bócsa and Karus (1998), and Virovets (1996). Some researchers have claimed to have produced essentially THC-free strains, although at present no commercial cultivar seems to be 100% free of THC. THC content has proven to be more easily reduced in monoecious than in dioecious varieties. It should be possible to select THC-free strains, and there has been speculation that genetic engineering could be helpful in this regard. As a strategic economic and political tactic, France has been attempting for several years to have the European Union (EU) adopt legislation forbidding the cultivation of industrial hemp cultivars with more than 0.1% THC, which would mean that primarily French varieties would have to be cultivated in Europe. However, the Canadian government has found that some French material has proven to be excessively high in THC.

Several controlled clinical trials have been performed, and meta-analyses of these support a beneficial effect of cannabinoids (dronabinol and nabilone) on chemotherapy -induced nausea and vomiting (N/V) compared with placebo. Both dronabinol and nabilone are approved by the U.S. Food and Drug Administration for the prevention or treatment of chemotherapy-induced N/V in cancer patients but not for other symptom management.
Hi…I read your statement about hemp being a cream that takes pain away. Living in Oregon there’s no talk about “hemp” but I don’t doubt your experience with it..and I’m wondering where you found it..so that maybe I can get a jar of it and see if it would help my aches and pains….I would really appreciate your response…and thanks for your “reply” that motivated me to write to you..
Categories: English terms borrowed from LatinEnglish terms derived from LatinEnglish terms derived from Ancient GreekEnglish doubletsEnglish 3-syllable wordsEnglish terms with IPA pronunciationEnglish terms with audio linksEnglish lemmasEnglish nounsEnglish uncountable nounsEnglish countable nounsen:Marijuanaen:Rosales order plantsFrench terms borrowed from LatinFrench terms derived from LatinFrench terms derived from Ancient GreekFrench doubletsFrench 3-syllable wordsFrench terms with IPA pronunciationFrench lemmasFrench nounsFrench masculine nounsFrench uncountable nounsfr:Recreational drugsLatin terms derived from Ancient GreekLatin 3-syllable wordsLatin terms with IPA pronunciationLatin lemmasLatin nounsLatin feminine nounsLatin third declension nounsLatin feminine nouns in the third declensionLatin non-lemma formsLatin noun formsla:PlantsNorman terms borrowed from LatinNorman terms derived from LatinNorman terms derived from Ancient GreekNorman lemmasNorman nounsnrf:Plantsnrf:Recreational drugsSpanish terms borrowed from LatinSpanish terms derived from LatinSpanish terms derived from Ancient GreekSpanish doubletsSpanish lemmasSpanish nounsSpanish uncountable nounses:Recreational drugsSwedish terms borrowed from LatinSwedish terms derived from LatinSwedish lemmasSwedish nounssv:Plantssv:Recreational drugs
Cannabis sativa is an annual wind-pollinated plant, normally dioecious and dimorphic, although sometimes monoecious (mostly in several modern European fiber cultivars). Figure 2 presents the basic morphology of the species. Some special hybrids, obtained by pollinating females of dioecious lines with pollen from monoecious plants, are predominantly female (so-called “all-female,” these generally also produce some hermaphrodites and occasional males). All-female lines are productive for some purposes (e.g. they are very uniform, and with very few males to take up space they can produce considerable grain), but the hybrid seed is expensive to produce. Staminate or “male” plants tend to be 10%–15% taller and are less robust than the pistillate or “female” (note the comparatively frail male in Fig. 3). So prolific is pollen production that an isolation distance of about 5 km is usually recommended for generating pure-bred foundation seed. A “perigonal bract” subtends each female flower, and grows to envelop the fruit. While small, secretory, resin-producing glands occur on the epidermis of most of the above-ground parts of the plant, the glands are very dense and productive on the perigonal bracts, which are accordingly of central interest in marijuana varieties. The root is a laterally branched taproot, generally 30–60 cm deep, up to 2.5 m in loose soils, very near the surface and more branched in wet soils. Extensive root systems are key to the ability of hemp crops to exploit deep supplies of nutrients and water. The stems are erect, furrowed, and usually branched, with a woody interior, and may be hollow in the internodes. Although the stem is often woody, the species is frequently referred to as a herb or forb. Plants vary enormously in height depending on genetic constitution and environment (Fig. 4), but are typically 1–5 m (heights of 12 m or more in cultivation have been claimed).
My Wife had Polio at age 5 and the lingering damage to the L leg and muscle drove her crazy. At age 21 she was using heavy doses of muscle relaxers and pain meds. Needed to bomb herself at night to get some sleep. A Post polio group in West Palm Beach told her about Marijuana and she got some from the Jamaican health aide that was her constant helper. After 5 months she quit all meds. All of them. Slowly came out of the drugged state the meds had caused from 15 years of use. We separated good friends and I know she has gone back to school and getting a degree. All from the help of a plant from Jamaica. I never understood the statement this plant has no viable medical value. Something smells in the politics of this prohibition. Shame.
Another claim is that Mellon, Secretary of the Treasury and the wealthiest man in America at that time, had invested heavily in DuPont's new synthetic fiber, nylon, and believed[dubious – discuss] that the replacement of the traditional resource, hemp, was integral to the new product's success.[121][126][127][128][129][130][131][132] The company DuPont and many industrial historians dispute a link between nylon and hemp, nylon became immediately a scarce commodity.[clarification needed] Nylon had characteristics that could be used for toothbrushes (sold from 1938) and very thin nylon fiber could compete with silk and rayon in various textiles normally not produced from hemp fiber, such as very thin stockings for women.[125][133][134][135][136]
Market considerations also heavily determine the wisdom of investing in hemp. Growing hemp unfortunately has a magnetic attraction to many, so there is danger of overproduction. A marketing board could be useful to prevent unrestrained competition and price fluctuations, but is difficult to establish when the industry is still very small. As noted above, unwise investment in Canada produced a glut of seeds that resulted in price dumping and unprofitable levels for the majority. Cultural and production costs of hemp have been said to be comparable to those for corn, and while the truth of this remains to be confirmed, the legislative burden that accompanies hemp puts the crop at a unique disadvantage. Among the problems that Canadian farmers have faced are the challenge of government licensing (some delays, and a large learning curve), very expensive and sometime poor seed (farmers are not allowed to generate their own seed), teenagers raiding fields in the mistaken belief that marijuana is being grown, and great difficulties in exportation because of the necessity of convincing authorities that hemp is not a narcotic. Unless the producer participates in sharing of value-added income, large profits are unlikely. The industry widely recognizes that value added to the crop is the chief potential source of profit, as indeed for most other crops.
Jump up ^ El-Alfy, Abir T.; Ivey, Kelly; Robinson, Keisha; Ahmed, Safwat; Radwan, Mohamed; Slade, Desmond; Khan, Ikhlas; Elsohly, Mahmoud; Ross, Samir (2010). "Antidepressant-like effect of Δ9-tetrahydrocannabinol and other cannabinoids isolated from Cannabis sativa L". Pharmacology Biochemistry and Behavior. 95 (4): 573–82. doi:10.1016/j.pbb.2010.03.004. PMC 2866040. PMID 20332000.

To make matters more confusing, nine states (including California, Washington, and Colorado) let residents buy cannabis-based products with or without THC. Nearly two dozen other “medical marijuana states” allow the sale of cannabis, including capsules, tinctures, and other items containing CBD or THC, at licensed dispensaries to people whose doctors have certified that they have an approved condition (the list varies by state but includes chronic pain, PTSD, cancer, autism, Crohn’s disease, and multiple sclerosis). Sixteen more states legalized CBD for certain diseases. But because all these products are illegal according to the federal government, cannabis advocates are cautious. “By and large, the federal government is looking the other way,” says Paul Armentano, deputy director of the Washington, DC–based National Organization for the Reform of Marijuana Laws (NORML), but until federal laws are changed, “this administration or a future one could crack down on people who produce, manufacture, or use CBD, and the law would be on its side.”


The most valid claims to environmental friendliness of hemp are with respect to agricultural biocides (pesticides, fungicides, herbicides). Cannabis sativa is known to be exceptionally resistant to pests (Fig. 51), although, the degree of immunity to attacking organisms has been greatly exaggerated, with several insects and fungi specializing on hemp. Despite this, use of pesticides and fungicides on hemp is usually unnecessary, although introduction of hemp to regions should be expected to generate local problems. Cannabis sativa is also relatively resistant to weeds, and so usually requires relatively little herbicide. Fields intended for hemp use are still frequently normally cleared of weeds using herbicides, but so long as hemp is thickly seeded (as is always done when hemp is grown for fiber), the rapidly developing young plants normally shade out competing weeds.
A systematic review assessing 19 studies that evaluated premalignant or malignant lung lesions in persons 18 years or older who inhaled Cannabis concluded that observational studies failed to demonstrate statistically significant associations between Cannabis inhalation and lung cancer after adjusting for tobacco use.[8] In the review of the published meta-analyses, the National Academies of Sciences, Engineering, and Medicine (NASEM) report concluded that there was moderate evidence of no statistical association between Cannabis smoking and the incidence of lung cancer.[9]

There is a general inverse relationship in the resin of Cannabis between the amounts of THC present and the amount of the other principal cannabinoid, CBD. Whereas most drug strains contain primarily THC and little or no CBD, fiber and oilseed strains primarily contain CBD and very little THC. CBD can be converted to THC by acid catalyzed cyclization, and so could serve as a starting material for manufacturing THC. In theory, therefore, low-THC cultivars do not completely solve the problem of drug abuse potential. In practice, however, the illicit drug trade has access to easier methods of synthesizing THC or its analogues than by first extracting CBD from non-drug hemp strains.
Hemp paper is useful for specialty applications such as currency and cigarette papers where strength is needed. The bast fiber is of greatest interest to the pulp and paper industry because of its superior strength properties compared to wood. However, the short, bulky fibers found in the inner part of the plant (hurds) can also be used to make cheaper grades of paper, apparently without greatly affecting quality of the printing surface. Hemp is not competitive for newsprint, books, writing papers, and general paper (grocery bags, coffee cups, napkins), although there is a specialty or novelty market for those specifically wishing to support the hemp industry by purchasing hemp writing or printing paper despite the premium price (Fig. 17).

We also rated the product based on the type of CBD they used: isolate, full-spectrum decarb, broad-spectrum, or distillate. There’s a lot of debate around what is actually best, but our first decision was to give points to CBD oil that contains a range of cannabinoids. While there are certainly people with good reasons for choosing an isolate, there’s a lot of good evidence that CBD works better in combination with other cannabinoids (this is called the “entourage effect”).

I don’t know a whole lot about the plants but a friend of mine who did weed told me hamper is just the stem of the cannabis. He would know, I wouldn’t. Sadly though he died June 10 of 2018 of stage 4 lung cancer. He was a heavy smoker and I just couldn’t be around it despite our best efforts to set up a ventilation system to fan the smoke out. I must be allergic to secondhand smoke though because I keep getting bronchitis every time I’m exposed to it for long enough and it doesn’t really take a real long time even under the best conditions. Second hand weed smoke really didn’t help either, with me smoke a smoke and I just can’t be around it as it becomes a serious issue. I’m still struggling with trying to get the junk out of my respiratory system that keeps building up in the very upper part of it

Cannabis is indigenous to Central Asia and Indian subcontinent,[183] and its use for fabric and rope dates back to the Neolithic age in China and Japan.[184][185] It is unclear when cannabis first became known for its psychoactive properties; some scholars suggest that the ancient Indian drug soma, mentioned in the Vedas, was cannabis, although this theory is disputed.[186]
Success stories like Oliver’s are everywhere, but there’s not a lot of data to back up those results. That’s because CBD comes from cannabis and, like nearly all other parts of the plant, is categorized by the Drug Enforcement Agency (DEA) as a Schedule 1 drug—the most restrictive classification. (Others on that list: heroin, Ecstasy, and peyote.) This classification, which cannabis advocates have tried for years to change, keeps cannabis-derived products, including CBD, from being properly studied in the U.S.
I just started taking CBD oil , I am on my 2nd Hip replacement surgery due to device failures looking at a 3rd surgery. Has you can imagine the pain, stress and anxiety levels are off the charts. Especially at an otherwise healthy 54 yr women. So i understand from reading posts its best to take it under the tongue. I am taking 1-2 ml a day. I can tell some difference,is your recommended dosage. I am using for pain , stress and sleep. I appreciate your feedback.
The vegetable oils have been classified by “iodine value” as drying (120–200), semi-drying (100–120), and non-drying (80–100), which is determined by the degree of saturation of the fatty acids present (Raie et al. 1995). Good coating materials prepared from vegetable oil depend on the nature and number of double bonds present in the fatty acids. Linseed oil, a drying oil, has a very high percentage of linolenic acid. Hempseed oil has been classified as a semi-drying oil, like soybean oil, and is therefore more suited to edible than industrial oil purposes. Nevertheless hemp oil has found applications in the past in paints, varnishes, sealants, lubricants for machinery, and printing inks. However, such industrial end uses are not presently feasible as the oil is considered too expensive (de Guzman 2001). Larger production volumes and lower prices may be possible, in which case hemp oil may find industrial uses similar to those of linseed (flax), soybean, and sunflower oils, which are presently used in paints, inks, solvents, binders, and in polymer plastics. Hemp shows a remarkable range of variation in oil constituents, and selection for oilseed cultivars with high content of valued industrial constituents is in progress.
I just started taking CBD oil , I am on my 2nd Hip replacement surgery due to device failures looking at a 3rd surgery. Has you can imagine the pain, stress and anxiety levels are off the charts. Especially at an otherwise healthy 54 yr women. So i understand from reading posts its best to take it under the tongue. I am taking 1-2 ml a day. I can tell some difference,is your recommended dosage. I am using for pain , stress and sleep. I appreciate your feedback.
The US Office of National Drug control Policy issued a statement on industrial hemp in 1997 (www.whitehousedrugpolicy.gov/policy/hemp%5Fold.html) which included the following: “Our primary concern about the legalization of the cultivation of industrial hemp (Cannabis sativa) is the message it would send to the public at large, especially to our youth at a time when adolescent drug use is rising rapidly... The second major concern is that legalizing hemp production may mean the de facto legalization of marijuana cultivation. Industrial hemp and marijuana are the product of the same plant, Cannabis sativa... Supporters of the hemp legalization effort claim hemp cultivation could be profitable for US farmers. However, according to the USDA and the US Department of Commerce, the profitability of industrial hemp is highly uncertain and probably unlikely. Hemp is a novelty product with limited sustainable development value even in a novelty market... For every proposed use of industrial hemp, there already exists an available product, or raw material, which is cheaper to manufacture and provides better market results.... Countries with low labor costs such as the Philippines and China have a competitive advantage over any US hemp producer.”
^ Jump up to: a b c d Campos AC, Moreira FA, Gomes FV, Del Bel EA, Guimarães FS (December 2012). "Multiple mechanisms involved in the large-spectrum therapeutic potential of cannabidiol in psychiatric disorders". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences (Review). 367 (1607): 3364–78. doi:10.1098/rstb.2011.0389. PMC 3481531. PMID 23108553.
Hemp is completely different from marijuana in its function, cultivation and application. But these differences didn’t stop our political leaders from getting confused and accidentally grouping all Cannabis species as a Schedule I Drug and banning it in 1970 under the Controlled Substances Act. Even after 45 years, the government still seems to have some confusion in distinguishing the two plants. Although legislation is being made, progress has been slow.In its application, hemp and marijuana serve completely different purposes. Marijuana, as it is widely known, is used for medicinal or recreational purposes. Hemp is used in variety of other applications that marijuana couldn’t possibly be used in. These include healthy dietary supplements, skin products, clothing, and accessories. Overall, hemp is known to have over 25,000 possible applications.
×