Nabiximols (Sativex), a Cannabis extract with a 1:1 ratio of THC:CBD, is approved in Canada (under the Notice of Compliance with Conditions) for symptomatic relief of pain in advanced cancer and multiple sclerosis.[17] Canada, New Zealand, and some countries in Europe also approve nabiximols for spasticity of multiple sclerosis, a common symptom that may include muscle stiffness, reduced mobility, and pain, and for which existing therapy is unsatisfactory.
The US Office of National Drug control Policy issued a statement on industrial hemp in 1997 ( which included the following: “Our primary concern about the legalization of the cultivation of industrial hemp (Cannabis sativa) is the message it would send to the public at large, especially to our youth at a time when adolescent drug use is rising rapidly... The second major concern is that legalizing hemp production may mean the de facto legalization of marijuana cultivation. Industrial hemp and marijuana are the product of the same plant, Cannabis sativa... Supporters of the hemp legalization effort claim hemp cultivation could be profitable for US farmers. However, according to the USDA and the US Department of Commerce, the profitability of industrial hemp is highly uncertain and probably unlikely. Hemp is a novelty product with limited sustainable development value even in a novelty market... For every proposed use of industrial hemp, there already exists an available product, or raw material, which is cheaper to manufacture and provides better market results.... Countries with low labor costs such as the Philippines and China have a competitive advantage over any US hemp producer.”
Given its name, you might assume THCV shares psychoactive powers with its potent counterpart, THC. In reality, this cannabinoid is more like a cross between CBD and THC. From the former, it takes its modulating powers. Acting like THC “lite,” THCV like CBD can dampen the effects of a strong high. Yet at higher doses, THCV kicks into a psychoactive stimulant in its own right.
Hemp is the fiber and seed part of the Cannabis Sativa L. plant, opposed to the flower part of the plant which is “legally considered” marijuana.  The fiber and seeds are incredible valuable and is why hemp is often called a “cash crop”.  Hemp is a very hearty plant and grows very quickly in very diverse soil conditions.  Cultivation of hemp for industrial purposes has been done by many civilizations for over 12,000 years.   Industrial hemp was the desired fiber used to manufacture rope, canvas, paper, and clothing until alternative textiles and synthetics for these purposes were discovered.  Although China has been the largest hemp producer over the years, other countries such as Australia and Canada are catching up.  It has been illegal for anyone to grow hemp in the United States as hemp is illegal under the marijuana prohibition act but Colorado has changed the laws and paved the way for industrial hemp production again in the United States(see hemp history). Now hemp oils, hemp plastics, hemp building materials and many hemp fiber products can be seen and purchased on the market. Hemp is truly an amazing plant with the potential to help “green up” many industries.
Although always sold at a premium price, hemp clothing has a natural appeal to a sector of the population. Hemp clothes are resistant to abrasion, but are typically abrasive. However, appropriate processing and blending with other natural fibers has significantly improved the “feel” of the product, and in China hemp textiles indistinguishable from fine linens in texture are available. Weaving of hemp fibers into textiles and apparel is primarily done in China, Hungary, Romania, Russia, and the Ukraine. Processing costs are higher for industrial hemp because the fibers vary from the standard specifications for fiber length and diameter established for the equipment used in most textile and apparel factories, necessitating the use of specialty machines. The North American hemp apparel industry today is based on fiber, yarn, and fabrics imported from Eastern Europe and China. The extraction technology and spinning facilities, to say nothing of much lower labor costs, make it very difficult for the potential development of a hemp textile industry in North America. The fact that spinning facilities for natural fibers are so concentrated in China is making it increasingly difficult to competitively produce hemp fabrics elsewhere. This of course lessens the value-added future of growing hemp for a potential textile industry in North America. It is possible, however, that new technologies could change this situation, and especially in the EU development is underway to establish a fledgling domestic hemp textile industry. In addition to textiles used in clothing, coarser woven cloth (canvas) is used for upholstery, bags, sacks, and tarpaulins. There is very little effort in North America to produce such woven products, and non-woven material (Fig. 15) can be more easily produced. Hempline in Ontario, the first firm to grow hemp for commercial purposes in North America since the second word war (starting with experimental cultivation in 1994), is the exception, and is concerned with production of fiber for upholstery and carpeting.

Hemp does best on a loose, well-aerated loam soil with high fertility and abundant organic matter. Well-drained clay soils can be used, but poorly-drained clay soils are very inappropriate because of their susceptibility to compaction, which is not tolerated. Young plants are sensitive to wet or flooded soils, so that hemp must have porous, friable, well-drained soils. Sandy soils will grow good hemp, provided that adequate irrigation and fertilization are provided, but doing so generally makes production uneconomical. Seedbed preparation requires considerable effort. Fall plowing is recommended, followed by careful preparation of a seedbed in the spring. The seedbed should be fine, level, and firm. Seed is best planted at 2–3 cm (twice as deep will be tolerated). Although the seedlings will germinate and survive at temperatures just above freezing, soil temperatures of 8°–10°C are preferable. Generally hemp should be planted after danger of hard freezes, and slightly before the planting date of maize. Good soil moisture is necessary for seed germination, and plenty of rainfall is needed for good growth, especially during the first 6 weeks. Seeding rate is specific to each variety, and this information should be sought from the supplier. Fiber strains are typically sown at a minimum rate of 250 seeds per m2 (approximately 45 kg/ha), and up to three times this density is sometimes recommended. In western Europe, seeding rates range from 60–70 kg/ha for fiber cultivars. Recommendations for seeding rates for grain production vary widely, from 10–45 kg/ha. Densities for seed production for tall, European, dual-purpose cultivars are less than for short oilseed cultivars. Low plant densities, as commonly found in growing tall European cultivars for seed, may not suppress weed growth adequately, and under these circumstances resort to herbicides may pose a problem for those wishing to grow hempseed organically. Hemp requires about the same fertility as a high-yielding crop of wheat. Industrial hemp grows well in areas that corn produces high yields. Growing hemp may require addition of up to 110 kg/ha of nitrogen, and 40–90 kg/ha of potash. Hemp particularly requires good nitrogen fertilization, more so for seed production than fiber. Adding nitrogen when it is not necessary is deleterious to fiber production, so that knowledge of the fertility of soils being used is very important. Organic matter is preferably over 3.5%, phosphorus should be medium to high (>40 ppm), potassium should be medium to high (>250 ppm), sulfur good (>5,000 ppm), and calcium not in excess (<6,000 ppm).

Also high in fiber, hemp seeds are more digestible than any other high-protein food, including meat, cheese, eggs, human milk, or cows’ milk. They’re high in antioxidants, and minerals like iron, zinc and copper as well as calcium, magnesium, potassium, carotene, thiamin (vitamin B1), riboflavin (vitamin B2), vitamin B6 and vitamin E. If that’s not enough, there’s also chlorophyll, sulfur, phosphorus, phospholipids, and phytosterols.

Acute effects may include anxiety and panic, impaired attention, and memory (while intoxicated), an increased risk of psychotic symptoms, and possibly an increased risk of accidents if a person drives a motor vehicle while intoxicated.[68] Short-term cannabis intoxication can hinder the mental processes of organizing and collecting thoughts. This condition is known as temporal disintegration.[69] Psychotic episodes are well-documented and typically resolve within minutes or hours. There have been few reports of symptoms lasting longer.[70][71]

State policymakers have taken action to address various policy issues — the definition of hemp, licensure of growers, regulation and certification of seeds, state-wide commissions and legal protection of growers. At least 41 states have passed legislation related to industrial hemp, such as defining hemp and removing barriers, and at least 39 states have allowed for hemp cultivation and production programs. Some states establishing these programs require a change in federal laws or a waiver from the DEA prior to implementation.
From the 1950s to the 1980s, the Soviet Union was the world's largest producer of hemp (3,000 km2 in 1970). The main production areas were in Ukraine,[82] the Kursk and Orel regions of Russia, and near the Polish border. Since its inception in 1931, the Hemp Breeding Department at the Institute of Bast Crops in Hlukhiv (Glukhov), Ukraine, has been one of the world's largest centers for developing new hemp varieties, focusing on improving fiber quality, per-hectare yields, and low THC content.[83][84]
Another field in which CBD is creating a buzz is in the area of mood disorders like anxiety and depression. Both conditions have been treated with a variety of medications, courtesy of Big Pharma, that have had varying levels of success. Again, the long list of side effects can be off-putting to someone who just wants to get through the day without the sweaty tension of anxiety or the gray haze of depression.
That being said, it was unlikely that the federal government was interested in pursuing individuals complying with state-mandated regulations surrounding legalized cannabis for recreational use, although the CSA law still gives them authority to do so. However, the new Trump administration may change this thinking and users of legal marijuana and legal dispensaries await further action and clarifying rules.
Cannabis is mostly used for recreation or as a medicinal drug, although it may also be used for spiritual purposes. In 2013, between 128 and 232 million people used cannabis (2.7% to 4.9% of the global population between the ages of 15 and 65).[28] It is the most commonly used illegal drug both in the world and the United States.[21][28] The countries with the highest use among adults as of 2018 are Zambia, the United States, Canada, and Nigeria.[29] In 2016, 51% of people in the United States had ever used cannabis.[30] About 12% had used it in the past year, and 7.3% had used it in the past month.[31]
American industrialists led by newspaper mogul William Randolph Hearst (who owned vast timberlands) and DuPont executives, who’d begun processing petroleum and wood for plastics, became disgruntled by the way hemp cut into their market shares. A 1994 Vegetarian Times article2 describes the group’s devastatingly successful tactics for twisting the public’s perception of hemp:

Known for invigorating and uplifting sensations, with a high focus in the mind rather than the body, sativas are extremely popular as daytime-use strains and for social occasions. Sativas are also widely associated with the cerebral and creativity-enhancing effects of weed. Hence, they are lauded by artists and other inventive people who use cannabis.
Jews living in Palestine in the 2nd century were familiar with the cultivation of hemp, as witnessed by a reference to it in the Mishna (Kil'ayim 2:5) as a variety of plant, along with Arum, that sometimes takes as many as three years to grow from a seedling. In late medieval Germany and Italy, hemp was employed in cooked dishes, as filling in pies and tortes, or boiled in a soup.[109] Hemp in later Europe was mainly cultivated for its fibers, and was used for ropes on many ships, including those of Christopher Columbus. The use of hemp as a cloth was centered largely in the countryside, with higher quality textiles being available in the towns.
Over the ages, countless innovations have attempted to improve on the basic experience of inhaling the smoke of combusted cannabis. As a result, there are numerous ways to smoke marijuana. The rolling technique is at the root of joints, blunts, and spliffs. On the other hand, glassware and other devices are essential for smoking weed out of a pipe, bong, or bubbler.

Jump up ^ Vanyukov MM, Tarter RE, Kirillova GP, Kirisci L, Reynolds MD, Kreek MJ, Conway KP, Maher BS, Iacono WG, Bierut L, Neale MC, Clark DB, Ridenour TA (June 2012). "Common liability to addiction and "gateway hypothesis": theoretical, empirical and evolutionary perspective". Drug and Alcohol Dependence (Review). 123 Suppl 1: S3–17. doi:10.1016/j.drugalcdep.2011.12.018. PMC 3600369. PMID 22261179.
There are many varieties of cannabis infusions owing to the variety of non-volatile solvents used.[179] The plant material is mixed with the solvent and then pressed and filtered to express the oils of the plant into the solvent. Examples of solvents used in this process are cocoa butter, dairy butter, cooking oil, glycerine, and skin moisturizers. Depending on the solvent, these may be used in cannabis foods or applied topically.[180]
Images in this summary are used with permission of the author(s), artist, and/or publisher for use within the PDQ summaries only. Permission to use images outside the context of PDQ information must be obtained from the owner(s) and cannot be granted by the National Cancer Institute. Information about using the illustrations in this summary, along with many other cancer-related images, is available in Visuals Online, a collection of over 2,000 scientific images.
There is some speculation that George Washington smoked the flower of the cannabis plant in order to achieve a recreational high ("Like all farmers, Washington probably sampled the quality and potency of what he grew, and he may have used this hemp to treat his chronic tooth aches"),[53] but there is no evidence in any of his writings that he grew hemp for anything other than industrial purposes. It is sometimes supposed that an excerpt from Washington's diary, which reads "Began to seperate [sic] the Male from the Female hemp at Do.&—rather too late" is evidence that he was trying to grow female plants for the THC found in the flowers. However, the editorial remark accompanying the diary states that "This may arise from their [the male] being coarser, and the stalks larger"[115] In subsequent days, he describes soaking the hemp[116] (to make the fibers usable) and harvesting the seeds,[117] suggesting that he was growing hemp for industrial purposes, not recreational.
After revisions to cannabis scheduling in the UK, the government moved cannabis back from a class C to a class B drug. A purported reason was the appearance of high potency cannabis. They believe skunk accounts for between 70 and 80% of samples seized by police[153] (despite the fact that skunk can sometimes be incorrectly mistaken for all types of herbal cannabis).[154][155] Extracts such as hashish and hash oil typically contain more THC than high potency cannabis flowers.[156]
Hemp is grown in temperate zones as an annual cultivated from seed and can reach a height of up to 5 metres (16 feet). Crops grow best in sandy loam with good drainage and require average monthly rainfall of at least 65 mm (2.5 inches) throughout the growing season. Crops cultivated for fibre are densely sowed and produce plants averaging 2–3 metres (6–10 feet) tall with almost no branching. Plants grown for oilseed are planted farther apart and are shorter and many-branched. The slender stalks are hollow except at the tip and base. The leaves are compound with palmate shape, and the flowers are small and greenish yellow. Seed-producing flowers form elongate, spikelike clusters growing on the pistillate, or female, plants. Pollen-producing flowers form many-branched clusters on staminate, or male, plants. Maximum yield and quality are obtained by harvesting soon after the plants reach maturity, indicated by the full blossoms and freely shedding pollen of the male plants. Although sometimes pulled up by hand, plants are more often cut off about 2.5 cm (1 inch) above the ground.
Each and every bottle is grown and processed with the same standards as the last guaranteeing quality and assuring potency. Made from CBD rich hemp flower sun grown in Oregon and MCT oil, Rosebud is proud to be a Vegan, Gluten Free, Non-GMO, Organic, and Sustainably Processed CO2 extract. Choose between our three potencies: 350mg, 700mg and 1000mg. 
In 1925 a compromise was made at an international conference in The Hague about the International Opium Convention that banned exportation of "Indian hemp" to countries that had prohibited its use, and requiring importing countries to issue certificates approving the importation and stating that the shipment was required "exclusively for medical or scientific purposes". It also required parties to "exercise an effective control of such a nature as to prevent the illicit international traffic in Indian hemp and especially in the resin".[199][200] In the United States in 1937, the Marihuana Tax Act was passed,[201] and prohibited the production of hemp in addition to cannabis.

Cannabis has mental and physical effects such as creating a "high" or "stoned" feeling, a general change in perception, heightened mood, and an increase in appetite.[21][22] Onset of effects is within minutes when smoked, and about 30 to 60 minutes when cooked and eaten.[21][23] They last for between two and six hours.[23] Short-term side effects may include a decrease in short-term memory, dry mouth, impaired motor skills, red eyes, and feelings of paranoia or anxiety.[21][24][25] Long-term side effects may include addiction, decreased mental ability in those who started as teenagers, and behavioral problems in children whose mothers used cannabis during pregnancy.[21] Studies have found a strong relation between cannabis use and the risk of psychosis,[26] though the cause-and-effect relationship is debated.[27]

I have sporadic back spasms for year I see a chiropractor monthly for maintenance (it help) and deal with daily Knee & hip joint pain due to my job (heavy mechanic/steel work with lots of walking). after reading all the great reviews on CBD oil I want to get off the daily ibuprofen regiment and try CBD oil. I would like to try it as a gel cap but would like some advise on dosage size. I also want to know how often I should take the CBD treatments. any and all advise is appreciated
^ Jump up to: a b Resstel LB, Tavares RF, Lisboa SF, Joca SR, Corrêa FM, Guimarães FS (January 2009). "5-HT1A receptors are involved in the cannabidiol-induced attenuation of behavioural and cardiovascular responses to acute restraint stress in rats". British Journal of Pharmacology. 156 (1): 181–8. doi:10.1111/j.1476-5381.2008.00046.x. PMC 2697769. PMID 19133999.
A randomized, placebo-controlled, crossover pilot study of nabiximols in 16 patients with chemotherapy-induced neuropathic pain showed no significant difference between the treatment and placebo groups. A responder analysis, however, demonstrated that five patients reported a reduction in their pain of at least 2 points on an 11-point scale, suggesting that a larger follow-up study may be warranted.[55]
A panellized system of hemp-lime panels for use in building construction is currently under test in a European Union-funded research collaboration led by the University of Bath. The panels are being designed to assure high-quality construction, rapid on-site erection, optimal hygrothermal performance from day one, and energy- and resource-efficient buildings. The 36-month-long work programme aims to refine product and manufacturing protocols, produce data for certification and marketing, warranty, insurance cover, and availability of finance. It also includes the development of markets in Britain, France, and Spain.[32]