And now, onto the thorny issue of legality. The simple answer to the question is yes – if it is extracted from hemp. The 2014 Farm Bill established guidelines for growing hemp in the U.S. legally. This so-called  “industrial hemp” refers to both hemp and hemp products which come from cannabis plants with less than 0.3 percent THC and are grown by a state-licensed farmer.
"Industrial hemp" means a fiber or oilseed crop, or both, that is limited to types of the plant Cannabis sativa L. having no more than three-tenths of 1 percent tetrahydrocannabinol (THC) contained in the dried flowering tops, whether growing or not; the seeds of the plant; the resin extracted from any part of the plant; and every compound, manufacture, salt, derivative, mixture, or preparation of the plant, its seeds or resin produced therefrom.
Hemp paper is useful for specialty applications such as currency and cigarette papers where strength is needed. The bast fiber is of greatest interest to the pulp and paper industry because of its superior strength properties compared to wood. However, the short, bulky fibers found in the inner part of the plant (hurds) can also be used to make cheaper grades of paper, apparently without greatly affecting quality of the printing surface. Hemp is not competitive for newsprint, books, writing papers, and general paper (grocery bags, coffee cups, napkins), although there is a specialty or novelty market for those specifically wishing to support the hemp industry by purchasing hemp writing or printing paper despite the premium price (Fig. 17).

Cannabis was also known to the ancient Assyrians, who discovered its psychoactive properties through the Iranians.[187] Using it in some religious ceremonies, they called it qunubu (meaning "way to produce smoke"), a probable origin of the modern word "cannabis".[188] The Iranians also introduced cannabis to the Scythians, Thracians and Dacians, whose shamans (the kapnobatai—"those who walk on smoke/clouds") burned cannabis flowers to induce trance.[189]


Over the past two years, 17 states have passed laws legalizing CBD so that patients can obtain the drug without fear of prosecution from local authorities. For intractable childhood epilepsies—the sorts of seizure disorders that for centuries have ruined lives and shattered families, the ones even specialists like Hernandez dread—CBD could be a miracle cure.
This is a hugely beneficial effect of CBD. Free radicals are the culprits when it comes to oxidative damage and inflammation. But CBD’s antioxidant properties can help to combat the negative effects of everyday exposure to elements that increase the production of free radicals. These elements include pervasive, but hugely unsurprising, things like:
Hash oil is a resinous matrix of cannabinoids obtained from the Cannabis plant by solvent extraction,[175] formed into a hardened or viscous mass.[176] Hash oil can be the most potent of the main cannabis products because of its high level of psychoactive compound per its volume, which can vary depending on the plant's mix of essential oils and psychoactive compounds.[177] Butane and supercritical carbon dioxide hash oil have become popular in recent years.[178]
In 1925 a compromise was made at an international conference in The Hague about the International Opium Convention that banned exportation of "Indian hemp" to countries that had prohibited its use, and requiring importing countries to issue certificates approving the importation and stating that the shipment was required "exclusively for medical or scientific purposes". It also required parties to "exercise an effective control of such a nature as to prevent the illicit international traffic in Indian hemp and especially in the resin".[199][200] In the United States in 1937, the Marihuana Tax Act was passed,[201] and prohibited the production of hemp in addition to cannabis.

"CBD increases the circulating levels of your natural endocannabinoids, which, in turn, interact with your cannabinoid receptors," Bonn-Miller says. "CBD has also been shown to interact with serotonin receptors, and that may be part of why it has some beneficial effects on anxiety. It also interacts with some pain receptors, which may be why we're starting to see effects on pain and inflammation."
Despite advanced analytical techniques, much of the cannabis used recreationally is inaccurately classified. One laboratory at the University of British Columbia found that Jamaican Lamb’s Bread, claimed to be 100% sativa, was in fact almost 100% indica (the opposite strain).[82] Legalization of cannabis in Canada (as of October 17, 2018) may help spur private-sector research, especially in terms of diversification of strains. It should also improve classification accuracy for cannabis used recreationally. Legalization coupled with Canadian government (Health Canada) oversight of production and labelling will likely result in more -- and more accurate -- testing to determine exact strains and content. Furthermore, the rise of craft cannabis growers in Canada should ensure quality, experimentation/research, and diversification of strains among private-sector producers.[83]
"Industrial hemp" means a fiber or oilseed crop, or both, that is limited to types of the plant Cannabis sativa L. having no more than three-tenths of 1 percent tetrahydrocannabinol (THC) contained in the dried flowering tops, whether growing or not; the seeds of the plant; the resin extracted from any part of the plant; and every compound, manufacture, salt, derivative, mixture, or preparation of the plant, its seeds or resin produced therefrom.
No ongoing clinical trials of Cannabis as a treatment for cancer in humans were identified in a PubMed search. The only published trial of any cannabinoid in patients with cancer is a small pilot study of intratumoral injection of delta-9-THC in patients with recurrent glioblastoma multiforme, which demonstrated no significant clinical benefit.[19,20] In a trial (NCT02255292) conducted in Israel, oral cannabidiol (CBD) was investigated as a single salvage agent for recurrent solid tumors. The study was projected to be completed in 2015; however, no results have been published. A small exploratory phase II study (GWCA1208 Part A [NCT01812603]) was conducted in the United Kingdom that used nabiximols, a 1:1 ratio of THC:CBD in a Cannabis-based medicinal extract oromucosal spray, in conjunction with temozolomide in treating patients with recurrent glioblastoma multiforme. The study enrolled 21 patients. Final results have not been published.
The 2014 US Farm Bill allows states that have passed their own industrial hemp legislation to grow industrial hemp for purposes of research and development. Several states — including Kentucky, Colorado, and Oregon — are already conducting hemp pilot projects. Many other states are currently pursuing similar legislation and programs. After many years of prohibition, American farmers are finally reacquainting themselves with industrial hemp.

Smoking marijuana is hands down the most widely used method of consuming cannabis. It’s also the simplest: a rolling paper and some dried marijuana flower are all you need. Other, more technological methods of smoking marijuana may be rising in popularity. But for many people, the social experience of passing weed around with some friends is what cannabis is all about.
I don’t know a whole lot about the plants but a friend of mine who did weed told me hamper is just the stem of the cannabis. He would know, I wouldn’t. Sadly though he died June 10 of 2018 of stage 4 lung cancer. He was a heavy smoker and I just couldn’t be around it despite our best efforts to set up a ventilation system to fan the smoke out. I must be allergic to secondhand smoke though because I keep getting bronchitis every time I’m exposed to it for long enough and it doesn’t really take a real long time even under the best conditions. Second hand weed smoke really didn’t help either, with me smoke a smoke and I just can’t be around it as it becomes a serious issue. I’m still struggling with trying to get the junk out of my respiratory system that keeps building up in the very upper part of it
The first step to finding your correct CBD dosage is getting as much information as you can about the product you’re using. What is the concentration of CBD? Are there third-party lab tests that can confirm that? The CBD industry is still mainly a grassroots therapeutic movement, and as such, largely unregulated. Concentration and purity levels can differ greatly depending on the manufacturing process.  
Designed to provide the optimum absorption of CBD into the blood stream by employing a patented slow release delivery system. It’s well accepted that CBD is most effective when taken sublingualy, however most oils when taken in this way are swallowed and broken down by your body. The Gel-Tab™. is placed under the tongue and the CBD is slowly absorbed resulting in higher rates of CBD being absorbed than what would be achieved with a normal oil
Neuropathic pain is a symptom cancer patients may experience, especially if treated with platinum-based chemotherapy or taxanes. Two RCTs of inhaled Cannabis in patients with peripheral neuropathy or neuropathic pain of various etiologies found that pain was reduced in patients who received inhaled Cannabis, compared with those who received placebo.[58,59] Two additional trials of inhaled Cannabis have also demonstrated the benefit of Cannabis over placebo in HIV-associated neuropathic pain.[60,61]

Jump up ^ Devinsky, Orrin; Cilio, Maria Roberta; Cross, Helen; Fernandez-Ruiz, Javier; French, Jacqueline; Hill, Charlotte; Katz, Russell; Di Marzo, Vincenzo; Jutras-Aswad, Didier; Notcutt, William George; Martinez-Orgado, Jose; Robson, Philip J.; Rohrback, Brian G.; Thiele, Elizabeth; Whalley, Benjamin; Friedman, Daniel (22 May 2014). "Cannabidiol: Pharmacology and potential therapeutic role in epilepsy and other neuropsychiatric disorders". Epilepsia. 55 (6): 791-802. doi:10.1111/epi.12631. PMC 4707667. PMID 24854329.
The main difference between the two is in its chemical composition, specifically in tetrahydrocannabinol (THC). THC is the chemical responsible marijuana’s psychological effects.An average batch of marijuana contains anywhere from 5-20% THC content. Some premium marijuana can have up to 25-30% THC. Hemp, on the other hand, has a max THC level of 0.3%, essentially making it impossible to feel any psychoactive effect or get a “high”. This threshold is heavily regulated in other countries that have legalized hemp.Hemp also has high cannabidiol (CBD) content that acts as THC’s antagonist, essentially making the minimal amount of THC useless.
Cannabis Ruderalis – Thought to be a cannabis species originating in central Asia, it flowers earlier, is much smaller, and can withstand much harsher climates than either Cannabis indica or Cannabis sativa. This species purportedly buds based on age rather than changes in length of daylight, known as auto-flowering. It’s used primarily for food production, such as hemp seeds and hemp seed oil.
Some jurisdictions use free voluntary treatment programs and/or mandatory treatment programs for frequent known users. Simple possession can carry long prison terms in some countries, particularly in East Asia, where the sale of cannabis may lead to a sentence of life in prison or even execution. Political parties, non-profit organizations, and causes based on the legalization of medical cannabis and/or legalizing the plant entirely (with some restrictions) have emerged in such countries as China and Thailand.[213][214]
Rather than keeping people out of the industry, Money thinks regulators should focus on helping farmers sell their products: for example, by connecting them with the "biomass brokers" who deal in the fibers, stalks, and seed matter produced by industrial hemp. "What I'm finding is that a lot of farmers in Wisconsin don't know what to do with their products," she said. "We tried to get a list of licensed farmers to help connect them with brokers, but the state wouldn't release that list."
Cannabis, also known as marijuana among other names,[n 1] is a psychoactive drug from the Cannabis plant used for medical or recreational purposes.[16][17][18] The main psychoactive part of cannabis is tetrahydrocannabinol (THC), one of 483 known compounds in the plant,[19] including at least 65 other cannabinoids.[20] Cannabis can be used by smoking, vaporizing, within food, or as an extract.[21]
There are practical, if cruder alternatives to separate the long fiber for high-quality textile production, but in fact such techniques are used mostly for non-textile applications. This involves production of “whole fibers” (i.e. harvesting both the long fibers from the cortex and the shorter fibers from throughout the stem), and technologies that utilize shortened hemp fibers. This approach is currently dominant in western Europe and Canada, and commences with field dew retting (typically 2–3 weeks). A principal limitation is climatic—the local environment should be suitably but not excessively moist at the close of the harvest season. Once stalks are retted, dried, and baled, they are processed to extract the fiber. In traditional hemp processing, the long fiber was separated from the internal woody hurds in two steps, breaking (stalks were crushed under rollers that broke the woody core into short pieces, some of which were separated) and scutching (the remaining hurds, short fibers (“tow”) and long fibers (“line fiber, ” “long-line fiber”) were separated). A single, relatively expensive machine called a decorticator can do these two steps as one. In general in the EU and Canada, fibers are not separated into tow and line fibers, but are left as “whole fiber.” In western Europe, the fiber is often “cottonized,” i.e. chopped into short segments the size of cotton and flax fiber, so that the fibers can be processed on flax processing machinery, which is very much better developed than such machinery is for hemp. In North America the use of hemp for production of even crude textiles is marginal. Accordingly, the chief current fiber usages of North American, indeed of European hemp, are non-textile.
Marijuana looks contrastingly different from hemp. When you observe their leaves, marijuana’s shape tends to either be broad leafed, a tight bud, or look like a nugget with organd hairs.  Hemp, on the other hand, has skinnier leaves that’s concentrated at the top. Few branches or leaves exist below the top part of the plant. When you observe the plants from afar, marijuana looks like a short fat bush. Hemp is typically skinnier and taller (up to 20 ft). At times, it almost looks like long ditchweed – hemp was actually found to grow among weeds in Nebraska. In general, when you compare a marijuana farm with those of industrial hemp, you’ll notice that they are clearly very different from one another.

There is certainly a need to utilize available germplasm sources in order to breed suitable cultivars for North America. A list of the 24 approved cultivars for the 2001 season in Canada is at www.hc-sc.gc.ca/hpb-dgps/therapeut/htmleng/hemp.html. Most of these are regulated by the European Organization of Economic Cooperation and Development (OECD). These cultivars are “approved” for use in Canada not on agricultural criteria, but merely on the basis that they meet the THC criterion. Indeed, most of these are unsuitable or only marginally suitable for Canada (Small and Marcus 2000), and only a very few Canadian cultivars to date have been created. In Canada, every acquisition of hemp grown at a particular place and time must be tested for THC content by an independent laboratory and, under the industrial hemp regulations, fields of hemp with more than 0.3% THC may require destruction (a slight degree of flexibility is generally exercised). Importation of experimental hemp lines (i.e. other than the approved cultivars) requires importation licenses (as well as phytosanitary clearance of the shipment by the Canadian Food Inspection Agency), and the importation licenses require an indication that the THC contents are low.
Cannabis impairs psychomotor performance in a wide variety of tasks, such as motor coordination, divided attention, and operative tasks of many types; human performance on complex machinery can be impaired for as long as 24 hours after smoking as little as 20 mg of THC in cannabis; there is an increased risk of motor vehicle accidents among persons who drive when intoxicated by cannabis.

With respect to fiber, a “composite” is often defined as a material consisting of 30%–70% fiber and 70%–30% matrix (Bolton 1995). However, in North America particleboards and fiberboards, which generally contain less than 10% adhesive or matrix, are sometimes referred to as composites. This section addresses plastic-type composites. In plastics, fibers are introduced to improve physical properties such as stiffness, impact resistance, bending and tensile strength. Man-made fibers of glass, kevlar and carbon are most commonly used today, but plant fibers offer considerable cost savings along with comparable strength properties.


In his office, however, Hernandez was wary of the CBD boom. He advises well-meaning parents to think twice about voyaging into the world of over-the-counter hemp oil treatments, even if their circumstances are dire. “It’s a huge gimmick that a lot of companies are using,” Hernandez said. “You don’t know what you’re getting. ... There’s a major quality problem.”
Jump up ^ "Minister of Justice and Constitutional Development and Others v Prince (Clarke, Stobbs and Thorpe Intervening) (Doctors of Life International Inc as Amicus Curiae); National Director of Public Prosecutions and Others v Rubin; National Director of Public Prosecutions and Others v Acton and Others". The Constitutional Court of South Africa.
Selection for fiber has resulted in strains that have much more bark fiber tissues and much less woody core than encountered in narcotic strains, oilseed strains, and wild plants (Fig. 12). In non-fiber strains of Cannabis, bark can be less than one quarter of the stem tissues (i.e. more than three quarters can be woody core). By contrast, in fiber strains half of the stem tissues can be bark, and more than half of this can be the desirable long primary fibers (de Meijer 1995). Non-fiber strains rarely have as much as 15% fiber in the bark.
According to researchers, 25 percent of all cancer patients use medical marijuana. Cancer patients are finding relief from medical cannabis. And they want to know more about it. Research conducted at St. George’s University of London, found the two most common cannabinoids in marijuana, tetrahydrocannabinol (THC) and cannabidiol (CBD), weakened the ferocity of cancer cells and made them more susceptible to radiation treatment. Other studies have shown that medical marijuana treatments can slow the growth of cancer cells and halt their spread to other parts of the body.
A 2015 meta analysis found that, although a longer period of abstinence was associated with smaller magnitudes of impairment, both retrospective and prospective memory were impaired in cannabis users. The authors concluded that some, but not all, of the deficits associated with cannabis use were reversible.[114] A 2012 meta analyses found that deficits in most domains of cognition persisted beyond the acute period of intoxication, but was not evident in studies where subjects were abstinent for more than 25 days.[115] Few high quality studies have been performed on the long-term effects of cannabis on cognition, and results were generally inconsistent.[116] Furthermore, effect sizes of significant findings were generally small.[115] One review concluded that, although most cognitive faculties were unimpaired by cannabis use, residual deficits occurred in executive functions.[117] Impairments in executive functioning are most consistently found in older populations, which may reflect heavier cannabis exposure, or developmental effects associated with adolescent cannabis use.[118] One review found three prospective cohort studies that examined the relationship between self reported cannabis use and intelligence quotient (IQ). The study following the largest number of heavy cannabis users reported that IQ declined between ages 7–13 and age 38. Poorer school performance and increased incidence of leaving school early were both associated with cannabis use, although a causal relationship was not established.[110] Cannabis users demonstrated increased activity in task-related brain regions, consistent with reduced processing efficiency.[119]
Research suggests that CBD may exert some of its pharmacological action through its inhibition of fatty acid amide hydrolase (FAAH), which may in turn increase the levels of endocannabinoids, such as anandamide, produced by the body.[8] It has also been speculated that some of the metabolites of CBD have pharmacological effects that contribute to the biological activity of CBD.[43]

One of the most significant developments for the North American hemp industry was investment in hemp products by Anita and Gordon Roddick, founders of The Body Shop, a well known international chain of hair and body care retailers. This was a rather courageous and principled move that required overcoming American legal obstacles related to THC content. The Body Shop now markets an impressive array of hemp nutraceutical cosmetics (Fig. 39), and this has given the industry considerable credibility. The Body Shop has reported gross sales of about a billion dollars annually, and that about 4% of sales in 2000 were hemp products.
Jump up ^ McLaren JA, Silins E, Hutchinson D, Mattick RP, Hall W (January 2010). "Assessing evidence for a causal link between cannabis and psychosis: a review of cohort studies". The International Journal on Drug Policy. 21 (1): 10–9. doi:10.1016/j.drugpo.2009.09.001. PMID 19783132. The contentious issue of whether cannabis use can cause serious psychotic disorders that would not otherwise have occurred cannot be answered based on the existing data
Lewis has even built his own machine to process the hemp. Using a Patagonia grant, he created a piece of equipment called a “break”, which incorporates design details borrowed from early European flax roller breaks. Lewis’s invention is a one-of-a-kind machine. It works by separating the hemp’s woody core from the fibers which are used in textiles. According to Lewis, the highest quantity of finished hemp fiber processed in a day using the machine is around 60lbs – which means about 600lbs of raw material. A newer version of the break, which Lewis is currently working on, will have a capacity to produce about 2000lbs per day of raw material.
Furthermore, medical cannabis use is legal in many more places than recreational marijuana use. Current research, alongside patient and caregiver testimony, attests to the many medicinal applications of marijuana. From pain to serious neurological diseases, medical cannabis is emerging as a safe and viable alternative to many common prescription medications.
Cannabidiol can be taken into the body in multiple different ways, including by inhalation of cannabis smoke or vapor, as an aerosol spray into the cheek, and by mouth. It may be supplied as an oil containing only CBD as the active ingredient (no added THC or terpenes), a full-plant CBD-dominant hemp extract oil, capsules, dried cannabis, or as a prescription liquid solution.[1][3]
There is great variation in Cannabis sativa, because of disruptive domestication for fiber, oilseed, and narcotic resin, and there are features that tend to distinguish these three cultigens (cultivated phases) from each other. Moreover, density of cultivation is used to accentuate certain architectural features. Figure 5 illustrates the divergent appearances of the basic agronomic categories of Cannabis in typical field configurations.
A 2016 review of animal studies indicated that cannabidiol has potential as an anxiolytic for relief of anxiety-related disorders and fear.[11] Reviews of preliminary research showed cannabidiol has potential for improving addictive disorders and drug dependence, although as of 2016, they indicated limited high-quality evidence for anti-addictive effects in people.[88][89][90]

Pharmacists have since moved to metric measurements, with a drop being rounded to exactly 0.05 mL (50 μL, that is, 20 drops per milliliter) - https://en.wikipedia.org/wiki/Drop_(unit)1oz is 30 mL1000mg/30mL = 33.3 mg/mL CBD concentration20 drops * .05 mL/drop = 1mL10 drops * .05 mL/drop = .5mLyou take 33.3 mg in the morning and 16.65mg at nightI might suggest taking 50mg in the morning: 50mg / 33.3 mg/mL = 1.50 mL 30 dropstry it for a couple days and see how it helps
Many animal studies have previously demonstrated that delta-9-THC and other cannabinoids have a stimulatory effect on appetite and increase food intake. It is believed that the endogenous cannabinoid system may serve as a regulator of feeding behavior. The endogenous cannabinoid anandamide potently enhances appetite in mice.[39] Moreover, CB1 receptors in the hypothalamus may be involved in the motivational or reward aspects of eating.[40]
Jump up ^ "Sativex Oral Mucosal Spray Public Assessment Report. Decentralized Procedure" (PDF). United Kingdom Medicines and Healthcare Products Regulatory Agency. p. 93. Retrieved 2015-05-07. There is clear evidence that recreational cannabis can produce a transient toxic psychosis in larger doses or in susceptible individuals, which is said to characteristically resolve within a week or so of absence (Johns 2001). Transient psychotic episodes as a component of acute intoxication are well-documented (Hall et al 1994)
With respect to fiber, a “composite” is often defined as a material consisting of 30%–70% fiber and 70%–30% matrix (Bolton 1995). However, in North America particleboards and fiberboards, which generally contain less than 10% adhesive or matrix, are sometimes referred to as composites. This section addresses plastic-type composites. In plastics, fibers are introduced to improve physical properties such as stiffness, impact resistance, bending and tensile strength. Man-made fibers of glass, kevlar and carbon are most commonly used today, but plant fibers offer considerable cost savings along with comparable strength properties.

During the period from 1937 to the late 60s, the U.S. government understood and acknowledged that industrial hemp and marijuana were distinct varieties of the Cannabis plant. Hemp was no longer officially recognized as distinct from marijuana after the passage of the Controlled Substances Act (CSA) of 1970. This is despite the fact that a specific exemption for hemp was included in the CSA under the definition of marijuana. The recent federal court case HIA vs DEA has re-established acknowledgement of distinct varieties of Cannabis, and supports the exemption for non-viable seed and fiber and any products made from them.
Down the line, Johnson also plans to create an onsite grow-space in the large two-story building where he's set up shop. In addition to getting deep satisfaction from the relief that customers say his CBD products provide, Johnson remains enthralled with "the fun side" of hemp production: namely, planting a seed and letting it grow. "It's just like in life," he added. "I can't say enough about the process, about the feeling of actually producing something."
“Geotextiles” or “agricultural textiles” include (1) ground-retaining, biodegradable matting designed to prevent soil erosion, especially to stabilize new plantings while they develop root systems along steep highway banks to prevent soil slippage (Fig. 32); and (2) ground-covers designed to reduce weeds in planting beds (in the manner of plastic mulch). At present the main materials used are polymeric (polythene, spun-blown polypropylene) and some glass fiber and natural fibers. Both woven and non-woven fibers can be applied to geotextiles; woven and knitted materials are stronger and the open structure may be advantageous (e.g. in allowing plants to grow through), but non-wovens are cheaper and better at suppressing weeds. Flax and hemp fibers exposed to water and soil have been claimed to disintegrate rapidly over the course of a few months, which would make them unacceptable for products that need to have long-term stability when exposed to water and oil. Coco (coir) fiber has been said to be much more suitable, due to higher lignin content (40%–50%, compared to 2%–5% in bast fibers); these are much cheaper than flax and hemp fibers (Karus et al. 2000). However, this analysis does not do justice to the developing hemp geotextile market. Production of hemp erosion control mats is continuing in both Europe and Canada. Given the reputation for rot resistance of hemp canvas and rope, it seems probable that ground matting is a legitimate use. Moreover, the ability to last outdoors for many years is frequently undesirable in geotextiles. For example, the widespread current use of plastic netting to reinforce grass sod is quite objectionable, the plastic persisting for many years and interfering with lawn care. Related to geotextile applications is the possibility of using hemp fiber as a planting substrate (biodegradable pots and blocks for plants), and as biodegradable twine to replace plastic ties used to attach plants to supporting poles. Still another consideration is the “green ideal” of producing locally for local needs; by this credo, hemp is preferable in temperate regions to the use of tropical fibers, which need to be imported.
There is a general inverse relationship in the resin of Cannabis between the amounts of THC present and the amount of the other principal cannabinoid, CBD. Whereas most drug strains contain primarily THC and little or no CBD, fiber and oilseed strains primarily contain CBD and very little THC. CBD can be converted to THC by acid catalyzed cyclization, and so could serve as a starting material for manufacturing THC. In theory, therefore, low-THC cultivars do not completely solve the problem of drug abuse potential. In practice, however, the illicit drug trade has access to easier methods of synthesizing THC or its analogues than by first extracting CBD from non-drug hemp strains.
Henry Ford recognized the utility of hemp in early times. In advance of today’s automobile manufacturers, he constructed a car with certain components made of resin stiffened with hemp fiber (Fig. 19). Rather ironically in view of today’s parallel situation, Henry Ford’s hemp innovations in the 1920s occurred at a time of crisis for American farms, later to intensify with the depression. The need to produce new industrial markets for farm products led to a broad movement for scientific research in agriculture that came to be labeled “Farm Chemurgy,” that today is embodied in chemical applications of crop constituents.
Professors William Emboden, Loran Anderson, and Harvard botanist Richard E. Schultes and coworkers also conducted taxonomic studies of Cannabis in the 1970s, and concluded that stable morphological differences exist that support recognition of at least three species, C. sativa, C. indica, and C. ruderalis.[67][68][69][70] For Schultes, this was a reversal of his previous interpretation that Cannabis is monotypic, with only a single species.[71] According to Schultes' and Anderson's descriptions, C. sativa is tall and laxly branched with relatively narrow leaflets, C. indica is shorter, conical in shape, and has relatively wide leaflets, and C. ruderalis is short, branchless, and grows wild in Central Asia. This taxonomic interpretation was embraced by Cannabis aficionados who commonly distinguish narrow-leafed "sativa" strains from wide-leafed "indica" strains.[72]
Jump up ^ Juliet Eilperin (February 11, 2013), "'Good seed' versus 'evil weed': Hemp activists eye legalization", The Washington Post – via The Japan Times Online, [A] couple of factors — the high taxes the federal government imposed on growing hemp in the late 1930s and again in the early '50s, and then the DEA's interpretation of the 1970 law — made producing hemp nearly impossible. Since the DEA only grants permits in rare instances and demands costly, elaborate security precautions, large-scale hemp growing in the United States is not viable.
Cannabis has an ancient history of ritual use and is found in pharmacological cults around the world. Hemp seeds discovered by archaeologists at Pazyryk suggest early ceremonial practices like eating by the Scythians occurred during the 5th to 2nd century BC, confirming previous historical reports by Herodotus.[190] It was used by Muslims in various Sufi orders as early as the Mamluk period, for example by the Qalandars.[191] Smoking pipes uncovered in Ethiopia and carbon-dated to around c. AD 1320 were found to have traces of cannabis.[192]

Those warning letters aside, there’s not a lot of federal oversight right now over the claims being made or the products that are being sold. Cohen warned against buying CBD products online, because “there’s a lot of scams out there.” Yet his clinic sells CBD, and he admits, “I say ‘Don’t buy online,’ but ours is worth doing, because we know what we’re doing. We ship all over.”

Medical cannabis, or medical marijuana, can refer to the use of cannabis and its cannabinoids to treat disease or improve symptoms; however, there is no single agreed-upon definition.[38][39] The rigorous scientific study of cannabis as a medicine has been hampered by production restrictions and other federal regulations.[40] There is limited evidence suggesting cannabis can be used to reduce nausea and vomiting during chemotherapy, to improve appetite in people with HIV/AIDS, and to treat chronic pain and muscle spasms.[41][42][43] Its use for other medical applications is insufficient for conclusions about safety or efficacy.
Perhaps the most important difference between hemp and marijuana is that marijuana – no pun intended – has a high delta-9 tetrahydrocannabinol content, or THC, which supplies the sought-after psychotropic effect, but it’s low in cannabidiol content, or CBD, which has medicinal properties. Hemp is just the opposite, being typically high in CBD and low in THC, meaning it’s not going to get anybody stoned. In fact, clinical studies show that CBD blocks the effect of THC in the nervous system. Both THC and CBD contain cannabinoid, but it’s the amount that needs to examined, because CBD is currently a Schedule 1 controlled substance. That means that at present, there’s currently no permissible medical protocol in the US.

As noted above, hemp seed cake makes an excellent feed for animals. However, feeding entire plants is another matter, because the leaves are covered with the resin-producing glands. While deer, groundhogs, rabbits, and other mammals will nibble on hemp plants, mammals generally do not choose to eat hemp. Jain and Arora (1988) fed narcotic Cannabis refuse to cattle, and found that the animals “suffered variable degrees of depression and revealed incoordination in movement.” By contrast, Letniak et al. (2000) conducted an experimental trial of hemp as silage. No significant differences were found between yield of the hemp and of barley/oat silage fed to heifers, suggesting that fermenting hemp plants reduces possible harmful constituents.


Still, as the saying goes, absence of evidence isn’t necessarily evidence of absence, and there’s a reason we don’t have a ton of solid research on CBDs yet — “to study it, we need a good source, ” said Ziva Cooper, who is an associate professor at Columbia University and was on the National Academies committee. CBD is hard to get because it’s still technically a Schedule I drug, which limits its availability, Cooper said.
In the United States, over three million people suffer from epilepsy – 470,000 of those people are children. Epilepsy is a disorder of the brain that causes seizures – of which there are over thirty different kinds, ranging from mild and infrequent to life-threatening. Not surprisingly, people with epilepsy face significant challenges – from the cost of healthcare to work limitations and social isolation.
Finding cultivars suited to local conditions is a key to success. Hemp prefers warm growing conditions, and the best European fiber strains are photoperiodically adapted to flowering in southern Europe, which provides seasons of at least 4 months for fiber, and 5.5 months for seed production. Asian land races are similarly adapted to long seasons. In Canada, many of the available cultivars flower too late in the season for fiber production, and the same may be predicted for the northern US. Fiber production should also be governed by availability of moisture throughout the season, and the need for high humidity in the late summer and fall for retting, so that large areas of the interior and west of North America are not adapted to growing fiber hemp. The US Corn Belt has traditionally been considered to be best for fiber hemp. There are very few cultivars dedicated to oilseed production (such as ‘Finola’ and ‘Anka’) or that at least are known to produce good oilseed crops (such as ‘Fasamo’ and ‘Uniko-B’). Oilseed production was a specialty of the USSR, and there is some likelihood that northern regions of North America may find short-season, short-stature oilseed cultivars ideal.
There is great variation in Cannabis sativa, because of disruptive domestication for fiber, oilseed, and narcotic resin, and there are features that tend to distinguish these three cultigens (cultivated phases) from each other. Moreover, density of cultivation is used to accentuate certain architectural features. Figure 5 illustrates the divergent appearances of the basic agronomic categories of Cannabis in typical field configurations.

Jump up ^ Morales, Paula; Hurst, Dow P.; Reggio, Patricia H. (2017). "Molecular Targets of the Phytocannabinoids: A Complex Picture". In Kinghorn, A. Douglas; Falk, Heinz; Gibbons, Simon; Kobayashi, Jun'ichi. Phytocannabinoids: Unraveling the Complex Chemistry and Pharmacology of Cannabis sativa. Progress in the Chemistry of Organic Natural Products. 103. Springer International Publishing. pp. 103–131. doi:10.1007/978-3-319-45541-9_4. ISBN 978-3-319-45539-6. PMC 5345356. PMID 28120232.
Images in this summary are used with permission of the author(s), artist, and/or publisher for use within the PDQ summaries only. Permission to use images outside the context of PDQ information must be obtained from the owner(s) and cannot be granted by the National Cancer Institute. Information about using the illustrations in this summary, along with many other cancer-related images, is available in Visuals Online, a collection of over 2,000 scientific images.

Hemp Products

×