The psychoactive effects of cannabis are known to have a triphasic nature. Primary psychoactive effects include a state of relaxation, and to a lesser degree, euphoria from its main psychoactive compound, tetrahydrocannabinol. Secondary psychoactive effects, such as a facility for philosophical thinking, introspection and metacognition have been reported among cases of anxiety and paranoia.[93] Finally, the tertiary psychoactive effects of the drug cannabis, can include an increase in heart rate and hunger, believed to be caused by 11-OH-THC, a psychoactive metabolite of THC produced in the liver.
Hemp has been grown for millennia in Asia and the Middle East for its fibre. Commercial production of hemp in the West took off in the eighteenth century, but was grown in the sixteenth century in eastern England.[140] Because of colonial and naval expansion of the era, economies needed large quantities of hemp for rope and oakum. In the early 1940s, world production of hemp fiber ranged from 250 000 to 350 000 metric tonnes, Russia was the biggest producer.[125]
It's the Wild West out there. Without any federal regulatory body checking labels, consumers have very little way of knowing what they're buying when they purchase CBD oil. Bonn-Miller co-authored a study that found that 26 percent of CBD products on the market contained less CBD than their label claimed. So the amount you need for an effective dose could vary drastically, not just from product to product, but from bottle to bottle of the same product.

Fiberboard. In North America the use of nonwood fibers in sheet fiberboard (“pressboard” or “composite board”) products is relatively undeveloped. Flax, jute, kenaf, hemp, and wheat straw can be used to make composite board. Wheat straw is the dominant nonwood fiber in such applications. Although it might seem that hemp bast fibers are desirable in composite wood products because of their length and strength, in fact the short fibers of the hurds have been found to produce a superior product (K. Domier, pers. commun.). Experimental production of hemp fiberboard has produced extremely strong material (Fig. 22). The economic viability of such remains to be tested. Molded fiberboard products are commercially viable in Europe (Fig. 23), but their potential in North America remains to be determined.
Hemp, the non-psychoactive variety of the cannabis sativa plant, is already being integrated into several mature markets such as food, textiles, construction, personal care and nutraceuticals. This relatively quiet cannabis relative is emerging as a potential commodity ripe to not only impact, but possibly revolutionize, tech-driven markets and economies around the world.
Industrial hemp is from the plant species Cannabis sativa and has been used worldwide to produce a variety of industrial and consumer products. Hemp is a source of fiber and oilseed grown in more than 30 nations. In the United States production is controlled under drug enforcement laws. To produce industrial hemp in the United States the grower must obtain a permit from the Drug Enforcement Agency (DEA).
In Western Europe, the cultivation of hemp was not legally banned by the 1930s, but the commercial cultivation stopped by then, due to decreased demand compared to increasingly popular artificial fibers.[141] Speculation about the potential for commercial cultivation of hemp in large quantities has been criticized due to successful competition from other fibers for many products. The world production of hemp fiber fell from over 300,000 metric tons 1961 to about 75,000 metric tons in the early 1990s and has after that been stable at that level.[142]
Only a handful of countries have legalized recreational marijuana. Uruguay was one of the first, in 2013. The Netherlands is perhaps the country most known for legal marijuana, yet the drug is illegal there. Spain has given its citizens the rights to grow and consume cannabis privately. Peru also allows citizens to possess marijuana as long as it is for personal, private use. As in Costa Rica, where people can have a “small amount,” without legal trouble.
Jump up ^ Morales, Paula; Hurst, Dow P.; Reggio, Patricia H. (2017). "Molecular Targets of the Phytocannabinoids: A Complex Picture". In Kinghorn, A. Douglas; Falk, Heinz; Gibbons, Simon; Kobayashi, Jun'ichi. Phytocannabinoids: Unraveling the Complex Chemistry and Pharmacology of Cannabis sativa. Progress in the Chemistry of Organic Natural Products. 103. Springer International Publishing. pp. 103–131. doi:10.1007/978-3-319-45541-9_4. ISBN 978-3-319-45539-6. PMC 5345356. PMID 28120232.
Pinfold Consulting. 1998. (G. Pinfold Consulting Economists Ltd. and J. White, InfoResults Ltd.). A maritime industrial hemp product marketing study. Prepared for Nova Scotia Agriculture and Marketing (Marketing and Food Industry Development), and New Brunswick Agriculture & Rural Development (Marketing and Business Development). agri.gov.ns.ca/pt/agron/hemp/hempms.htm

Topicals represent a newer emerging market in medical marijuana products geared toward health and beauty. Cannabinoids can be absorbed through the skin for certain therapeutic benefits without any psychoactivity. Additionally, the essential oils in hemp and cannabis provide many benefits for skin health. From moisturizers to shampoos and deodorants, medical cannabis products continue to diversify.


Despite advanced analytical techniques, much of the cannabis used recreationally is inaccurately classified. One laboratory at the University of British Columbia found that Jamaican Lamb’s Bread, claimed to be 100% sativa, was in fact almost 100% indica (the opposite strain).[82] Legalization of cannabis in Canada (as of October 17, 2018) may help spur private-sector research, especially in terms of diversification of strains. It should also improve classification accuracy for cannabis used recreationally. Legalization coupled with Canadian government (Health Canada) oversight of production and labelling will likely result in more -- and more accurate -- testing to determine exact strains and content. Furthermore, the rise of craft cannabis growers in Canada should ensure quality, experimentation/research, and diversification of strains among private-sector producers.[83]
For kids with severe forms of epilepsy, changes in medication levels can be extremely dangerous. “If their levels go low, they’re at increased risk of seizures, which could lead to an emergency room visit or an ICU stay,” Knupp said. “On the other hand, if their levels go high, their side effects can increase dramatically.” Side effects from epilepsy medications can range anywhere from drowsiness to vomiting to heart arrhythmia, Knupp noted. “For some people that could mean a minor inconvenience, but for some patients it could be life-threatening.”
In the mid 1990s, the EU provided subsidization for hemp cultivation of ca. $1,050/ha. This support was instrumental in developing a hemp industry in western Europe. However, no comparable support is available in North America, and indeed those contemplating entering into hemp cultivation are faced with extraordinary costs and/or requirements in connection with licensing, security, THC analysis, and record keeping. Those involved in value-added processing and distribution are also faced with legal uncertainties and the regular threat of idiosyncratic, indeed irrational actions of various governments. Simply displaying a C. sativa leaf on advertising has led to the threat of criminal charges in the last decade in several G8 countries. Attempting to export or import hemp products among countries is presently a most uncertain activity.
If you haven’t been bombarded with CBD marketing or raves about it from friends, get ready. This extract—which comes from either marijuana or its industrial cousin, hemp—is popping up everywhere. There are CBD capsules, tinctures, and liquids for vaping plus CBD-infused lotions, beauty products, snacks, coffee, and even vaginal suppositories. Already some 1,000 brands of CBD products are available in stores—and online in states that don’t have lenient cannabis laws. This is a tiny fraction of what’s to come: The CBD market is poised to exceed $1 billion by 2020, per the Chicago-based research firm Brightfield Group.

Individuals are responsible for sourcing their own propagative material. TNHIA is a great resource. All seed or plant material being brought into the state must have prior approval by the Tennessee Department of Agriculture (TDA). Please use our seed and propagule acquisition forms to request approval. If importing from another state use this link: https://www.tn.gov/content/dam/tn/agriculture/documents/planthealth/Domestic_Seed_Import_Requirements.pdf

The exploding recreational market for marijuana has rapidly popularized many methods of consuming cannabis that was decidedly part of the fringe just a few short years ago. Smoking marijuana remains the most widely embraced method, due to the greater accessibility of marijuana flower. But legal recreational cannabis is introducing many marijuana users to new forms of the drug, especially concentrates and edibles. Here’s a brief overview of the major methods for consuming marijuana.


"Right now, any claims and dosing recommendations by any company making a CBD product for the medical marijuana market is purely anecdotal," he says. "Asking 100 people who use your product whether they feel better isn't real science. The products on the market are also different from what was used in the scientific studies that they are basing their claims upon. If a study found an anti-anxiety effect when dosing humans with synthetic CBD, that doesn't mean that your CBD oil that contains 18 percent CBD is going to reduce anxiety. It might even have the opposite effect."
Some of the research focuses that were explored in 2018 were: comparison of various agronomic factors on industrial hemp (planting dates, tillage regimens, range of soil fertility, etc.); hemp variety comparison for suitability to PA growing conditions; study of the effectiveness of potential herbicide products; comparison of hemp’s capability for weed suppression to other crops; surveying hemp crops for presence of arthropod and disease pests; evaluation of hemp’s performance for phytoremediation and land reclamation; study of hemp seed oil processing and marketability; development of industrial hemp products (using grain, stalks and flowers); genetic selection for desired hemp variety characteristics; and evaluations of hemp as an animal feed ingredient (cattle).  

Hemp was made illegal to grow without a permit in the U.S. under the Controlled Substances Act passed in 1970 because of its relation to marijuana,[17] and any imported hemp products must meet a zero tolerance level.[87] Some states have made the cultivation of industrial hemp legal, but farmers in many states have not yet begun to grow it because of resistance from the federal Drug Enforcement Administration,[88] making "large-scale hemp growing" in the United States "not viable" as late as 2013.[89] In 2013, after the legalization of cannabis in the state, several farmers in Colorado planted and harvested several acres of hemp, bringing in the first hemp crop in the United States in over half a century.[90] Colorado,[91] Vermont, California, and North Dakota have passed laws enabling hemp licensure. All four states are waiting for permission to grow hemp from the DEA. Currently,[92] Oregon has licensed industrial hemp as of August 2009.[93] Congress included a provision in the Agricultural Act of 2014 that allowed colleges and state agencies to grow and conduct research on hemp in states where it is legal.[17] Hemp production in Kentucky, formerly the United States' leading producer, resumed in 2014.[94] Hemp production in North Carolina resumed in 2017,[95] and in Washington State the same year.[96] By the end of 2017, at least 34 U.S. states had industrial hemp programs.[97] In 2018, New York began taking strides in industrial hemp production, along with hemp research pilot programs at Cornell University, Binghamton University and SUNY Morrisville.[98]
Among the company’s many offerings is Real Scientific Hemp Oil, which it sells through its subsidiary HempMedsPx, also based in Poway. On its web site, HempMedsPx describes how its hemp “is grown in northern European microclimates, without the use of any pesticides, herbicides or chemical fertilizers.” The company promises that it “continuously scrutinizes and improves the processes to meet all regulations and exceeds quality standards.”
"Right now, any claims and dosing recommendations by any company making a CBD product for the medical marijuana market is purely anecdotal," he says. "Asking 100 people who use your product whether they feel better isn't real science. The products on the market are also different from what was used in the scientific studies that they are basing their claims upon. If a study found an anti-anxiety effect when dosing humans with synthetic CBD, that doesn't mean that your CBD oil that contains 18 percent CBD is going to reduce anxiety. It might even have the opposite effect."
The CBD utilized in our tinctures is extracted from industrial hemp cultivated in the United States. To further ensure quality and purity, our industrial hemp goes through a supercritical CO2 extraction process to obtain the best possible CBD solution. This solution is then formulated by our board-certified pharmacists into finished products and sent out for third-party testing. Our CBD oil is made with high-quality CBD extracted from organic hemp that is abundant in naturally produced terpenes, oils, vitamins, omega fatty acids, and other components.
In recent decades, the neurobiology of cannabinoids has been analyzed.[12-15] The first cannabinoid receptor, CB1, was identified in the brain in 1988. A second cannabinoid receptor, CB2, was identified in 1993. The highest expression of CB2 receptors is located on B lymphocytes and natural killer cells, suggesting a possible role in immunity. Endogenous cannabinoids (endocannabinoids) have been identified and appear to have a role in pain modulation, control of movement, feeding behavior, mood, bone growth, inflammation, neuroprotection, and memory.[16]

Today, you’ll find nutty-tasting (hull-less) hemp seeds and their oils baked in breads, cookies, and cakes, blended in smoothies, or tossed into quinoa and pasta dishes, burgers, pizza, vegetables sautés, soups, salads, oatmeal, yogurt, trail mix, and salad dressings. It’s a niche market, with a growing number of specialty outlets due to a growing understanding of this food’s nutritional benefits.
Canada is specialized on oilseed production and processing, so that hemp oil and grain are much more suitable than fiber. Because of the extensive development of oilseeds in Canada, there is extensive capacity to produce high-quality cold-pressed hemp oil. Canada in the last 5 years has made great advances in the growing, harvesting, and processing of hempseed, and indeed has moved ahead of the EU in the development of raw materials and products for the natural foods, nutraceuticals, and cosmetics industries. In the EU, a yield of 1 t/ha is considered good. In Canada, extraordinary yields of 1.5 t/ha have been realized, at least locally, although in the initial years of hempseed development in Canada yields were often less than 500 kg/ha. In 1999, the year of largest Canadian hemp acreage, yields averaged 900 kg/ha. (Ideally, hemp seed yield should be based on air dry weight—with about 12% moisture. Hemp yields are sometime uncertain, and could be exaggerated by as much as 50% when moist weights are reported.)
Food and beverage products containing CBD were introduced in the United States in 2017.[54] Similar to energy drinks and protein bars which may contain vitamin or herbal additives, food and beverage items can be infused with CBD as an alternative means of ingesting the substance.[55] In the United States, numerous products are marketed as containing CBD, but in reality contain little or none.[56] Some companies marketing CBD-infused food products with claims that are similar to the effects of prescription drugs have received warning letters from the Food and Drug Administration for making unsubstantiated health claims.[57]
Mainly what they look for in drug test is THC. Hemp contains only very minuscule amounts of THC. You cannot get high off of hemp. It is impossible. You would have to smoke or eat a boat load of hemp to even remotely get a buzz. A person could not ingest that much hemp, and a person would die of smoke inhalation before smoking enough to achieve a buzz. So hemp does not contain enough THC to show up on a drug screening. I hope this information helps you.
Although always sold at a premium price, hemp clothing has a natural appeal to a sector of the population. Hemp clothes are resistant to abrasion, but are typically abrasive. However, appropriate processing and blending with other natural fibers has significantly improved the “feel” of the product, and in China hemp textiles indistinguishable from fine linens in texture are available. Weaving of hemp fibers into textiles and apparel is primarily done in China, Hungary, Romania, Russia, and the Ukraine. Processing costs are higher for industrial hemp because the fibers vary from the standard specifications for fiber length and diameter established for the equipment used in most textile and apparel factories, necessitating the use of specialty machines. The North American hemp apparel industry today is based on fiber, yarn, and fabrics imported from Eastern Europe and China. The extraction technology and spinning facilities, to say nothing of much lower labor costs, make it very difficult for the potential development of a hemp textile industry in North America. The fact that spinning facilities for natural fibers are so concentrated in China is making it increasingly difficult to competitively produce hemp fabrics elsewhere. This of course lessens the value-added future of growing hemp for a potential textile industry in North America. It is possible, however, that new technologies could change this situation, and especially in the EU development is underway to establish a fledgling domestic hemp textile industry. In addition to textiles used in clothing, coarser woven cloth (canvas) is used for upholstery, bags, sacks, and tarpaulins. There is very little effort in North America to produce such woven products, and non-woven material (Fig. 15) can be more easily produced. Hempline in Ontario, the first firm to grow hemp for commercial purposes in North America since the second word war (starting with experimental cultivation in 1994), is the exception, and is concerned with production of fiber for upholstery and carpeting.
Two studies examined the effects of oral delta-9-THC on cancer pain. The first, a double-blind, placebo-controlled study involving ten patients, measured both pain intensity and pain relief.[50] It was reported that 15 mg and 20 mg doses of the cannabinoid delta-9-THC were associated with substantial analgesic effects, with antiemetic effects and appetite stimulation.

The first example of the use of hempcrete was in 1986 in France with the renovation of the Maison de la Turquie in Nogent-sur-Seine by the innovator Charles Rasetti.[27] In the UK hemp lime was first used in 2000 for the construction of two test dwellings in Haverhill.[28] Designed by Modece Architects,[29] who pioneered hemp's use in UK construction, the hemp houses were monitored in comparison with other standard dwellings by BRE. Completed in 2009, the Renewable House is one of the most technologically advanced made from hemp-based materials.[30] The first US home made of hemp-based materials was completed in August 2010 in Asheville, North Carolina.[31]
×